devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Tejun Heo <tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Oliver Schinagl <oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org>,
	Maxime Ripard
	<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
	Richard Zhu
	<Hong-Xing.Zhu-KZfg59tc24xl57MIdRCFDg@public.gmane.org>,
	Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>,
	linux-ide-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
	Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH v5 11/14] ahci-imx: Add imx_ahci_phy_init / _exit helpers
Date: Wed, 22 Jan 2014 20:04:46 +0100	[thread overview]
Message-ID: <1390417489-5354-12-git-send-email-hdegoede@redhat.com> (raw)
In-Reply-To: <1390417489-5354-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>

Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 drivers/ata/ahci_imx.c | 142 +++++++++++++++++++++++++++----------------------
 1 file changed, 77 insertions(+), 65 deletions(-)

diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c
index 2210866..e58e062 100644
--- a/drivers/ata/ahci_imx.c
+++ b/drivers/ata/ahci_imx.c
@@ -51,6 +51,7 @@ static int ahci_imx_hotplug;
 module_param_named(hotplug, ahci_imx_hotplug, int, 0644);
 MODULE_PARM_DESC(hotplug, "AHCI IMX hot-plug support (0=Don't support, 1=support)");
 
+static void imx_ahci_phy_exit(struct ahci_host_priv *hpriv);
 static void ahci_imx_host_stop(struct ata_host *host);
 
 static void ahci_imx_error_handler(struct ata_port *ap)
@@ -78,10 +79,8 @@ static void ahci_imx_error_handler(struct ata_port *ap)
 	 */
 	reg_val = readl(mmio + PORT_PHY_CTL);
 	writel(reg_val | PORT_PHY_CTL_PDDQ_LOC, mmio + PORT_PHY_CTL);
-	regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
-			IMX6Q_GPR13_SATA_MPLL_CLK_EN,
-			!IMX6Q_GPR13_SATA_MPLL_CLK_EN);
-	ahci_platform_disable_clks(hpriv);
+
+	imx_ahci_phy_exit(hpriv);
 	imxpriv->no_device = true;
 }
 
@@ -98,40 +97,18 @@ static const struct ata_port_info ahci_imx_port_info = {
 	.port_ops	= &ahci_imx_ops,
 };
 
-static int imx_ahci_probe(struct platform_device *pdev)
+static int imx_ahci_phy_init(struct ahci_host_priv *hpriv)
 {
-	struct device *dev = &pdev->dev;
-	struct ahci_host_priv *hpriv;
-	struct imx_ahci_priv *imxpriv;
-	unsigned int reg_val;
+	struct imx_ahci_priv *imxpriv = hpriv->plat_data;
 	int rc;
 
-	imxpriv = devm_kzalloc(dev, sizeof(*imxpriv), GFP_KERNEL);
-	if (!imxpriv)
-		return -ENOMEM;
-
-	hpriv = ahci_platform_get_resources(pdev);
-	if (IS_ERR(hpriv))
-		return PTR_ERR(hpriv);
-	if (!hpriv->clks[CLK_AHB]) {
-		dev_err(dev, "no ahb clk, need sata, sata_ref and ahb clks\n");
-		rc = -ENOENT;
-		goto put_resources;
-	}
-	hpriv->plat_data = imxpriv;
-
-	imxpriv->gpr =
-		syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
-	if (IS_ERR(imxpriv->gpr)) {
-		dev_err(dev, "failed to find fsl,imx6q-iomux-gpr regmap\n");
-		rc = PTR_ERR(imxpriv->gpr);
-		goto put_resources;
-	}
+	if (imxpriv->no_device)
+		return 0;
 
 	if (hpriv->target_pwr) {
 		rc = regulator_enable(hpriv->target_pwr);
 		if (rc)
-			goto put_resources;
+			return rc;
 	}
 
 	rc = ahci_platform_enable_clks(hpriv);
@@ -144,7 +121,8 @@ static int imx_ahci_probe(struct platform_device *pdev)
 	 * is 0x07ffffff, and the other one write for setting
 	 * the mpll_clk_en.
 	 */
-	regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK
+	regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13
+			, IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK
 			| IMX6Q_GPR13_SATA_RX_LOS_LVL_MASK
 			| IMX6Q_GPR13_SATA_RX_DPLL_MODE_MASK
 			| IMX6Q_GPR13_SATA_SPD_MODE_MASK
@@ -162,9 +140,69 @@ static int imx_ahci_probe(struct platform_device *pdev)
 			| IMX6Q_GPR13_SATA_TX_ATTEN_9_16
 			| IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB
 			| IMX6Q_GPR13_SATA_TX_LVL_1_025_V);
-	regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_MPLL_CLK_EN,
+
+	regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
+			IMX6Q_GPR13_SATA_MPLL_CLK_EN,
 			IMX6Q_GPR13_SATA_MPLL_CLK_EN);
-	usleep_range(100, 200);
+
+	usleep_range(1000, 2000);
+	return 0;
+
+disable_regulator:
+	if (hpriv->target_pwr)
+		regulator_disable(hpriv->target_pwr);
+	return rc;
+}
+
+static void imx_ahci_phy_exit(struct ahci_host_priv *hpriv)
+{
+	struct imx_ahci_priv *imxpriv = hpriv->plat_data;
+
+	if (imxpriv->no_device)
+		return;
+
+	regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
+			IMX6Q_GPR13_SATA_MPLL_CLK_EN,
+			!IMX6Q_GPR13_SATA_MPLL_CLK_EN);
+	ahci_platform_disable_clks(hpriv);
+
+	if (hpriv->target_pwr)
+		regulator_disable(hpriv->target_pwr);
+}
+
+static int imx_ahci_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ahci_host_priv *hpriv;
+	struct imx_ahci_priv *imxpriv;
+	unsigned int reg_val;
+	int rc;
+
+	imxpriv = devm_kzalloc(dev, sizeof(*imxpriv), GFP_KERNEL);
+	if (!imxpriv)
+		return -ENOMEM;
+
+	hpriv = ahci_platform_get_resources(pdev);
+	if (IS_ERR(hpriv))
+		return PTR_ERR(hpriv);
+	if (!hpriv->clks[CLK_AHB]) {
+		dev_err(dev, "no ahb clk, need sata, sata_ref and ahb clks\n");
+		rc = -ENOENT;
+		goto put_resources;
+	}
+	hpriv->plat_data = imxpriv;
+
+	imxpriv->gpr =
+		syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
+	if (IS_ERR(imxpriv->gpr)) {
+		dev_err(dev, "failed to find fsl,imx6q-iomux-gpr regmap\n");
+		rc = PTR_ERR(imxpriv->gpr);
+		goto put_resources;
+	}
+
+	rc = imx_ahci_phy_init(hpriv);
+	if (rc)
+		goto put_resources;
 
 	/*
 	 * Configure the HWINIT bits of the HOST_CAP and HOST_PORTS_IMPL,
@@ -189,15 +227,12 @@ static int imx_ahci_probe(struct platform_device *pdev)
 
 	rc = ahci_platform_init_host(pdev, hpriv, &ahci_imx_port_info, 0, 0);
 	if (rc)
-		goto disable_clks;
+		goto phy_exit;
 
 	return 0;
 
-disable_clks:
-	ahci_platform_disable_clks(hpriv);
-disable_regulator:
-	if (hpriv->target_pwr)
-		regulator_disable(hpriv->target_pwr);
+phy_exit:
+	imx_ahci_phy_exit(hpriv);
 put_resources:
 	ahci_platform_put_resources(hpriv);
 	return rc;
@@ -206,18 +241,8 @@ put_resources:
 static void ahci_imx_host_stop(struct ata_host *host)
 {
 	struct ahci_host_priv *hpriv = host->private_data;
-	struct imx_ahci_priv *imxpriv = hpriv->plat_data;
-
-	if (!imxpriv->no_device) {
-		regmap_update_bits(imxpriv->gpr, 0x34,
-			IMX6Q_GPR13_SATA_MPLL_CLK_EN,
-			!IMX6Q_GPR13_SATA_MPLL_CLK_EN);
-		ahci_platform_disable_clks(hpriv);
-	}
-
-	if (hpriv->target_pwr)
-		regulator_disable(hpriv->target_pwr);
 
+	imx_ahci_phy_exit(hpriv);
 	ahci_platform_put_resources(hpriv);
 }
 
@@ -225,26 +250,13 @@ static int imx_ahci_suspend(struct device *dev)
 {
 	struct ata_host *host = dev_get_drvdata(dev);
 	struct ahci_host_priv *hpriv = host->private_data;
-	struct imx_ahci_priv *imxpriv = hpriv->plat_data;
 	int rc;
 
 	rc = ahci_platform_suspend_host(dev);
 	if (rc)
 		return rc;
 
-	/*
-	 * If no_device is set, The CLKs had been gated off in the
-	 * initialization so don't do it again here.
-	 */
-	if (!imxpriv->no_device) {
-		regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
-				IMX6Q_GPR13_SATA_MPLL_CLK_EN,
-				!IMX6Q_GPR13_SATA_MPLL_CLK_EN);
-		ahci_platform_disable_clks(hpriv);
-	}
-
-	if (hpriv->target_pwr)
-		regulator_disable(hpriv->target_pwr);
+	imx_ahci_phy_exit(hpriv);
 
 	return 0;
 }
-- 
1.8.5.3

  parent reply	other threads:[~2014-01-22 19:04 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-22 19:04 [PATCH v5 00/14] ahci: library-ise ahci_platform, add sunxi driver and cleanup imx driver Hans de Goede
     [not found] ` <1390417489-5354-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-01-22 19:04   ` [PATCH v5 01/14] libahci: Allow drivers to override start_engine Hans de Goede
2014-01-22 19:04   ` [PATCH v5 02/14] libahci: Move ahci_host_priv declaration to include/linux/ahci.h Hans de Goede
2014-01-22 19:04   ` [PATCH v5 03/14] ahci-platform: Pass ahci_host_priv ptr to ahci_platform_data init method Hans de Goede
2014-01-22 19:04   ` [PATCH v5 04/14] ahci-platform: Add support for devices with more then 1 clock Hans de Goede
2014-01-22 19:04   ` [PATCH v5 05/14] ahci-platform: Add support for an optional regulator for sata-target power Hans de Goede
2014-01-22 19:04   ` [PATCH v5 06/14] ahci-platform: Add enable_ / disable_resources helper functions Hans de Goede
2014-01-22 19:04   ` [PATCH v5 07/14] ahci-platform: "Library-ise" ahci_probe functionality Hans de Goede
2014-01-27 10:39     ` Roger Quadros
     [not found]       ` <52E63778.5000509-l0cyMroinI0@public.gmane.org>
2014-01-27 10:51         ` Hans de Goede
     [not found]           ` <52E63A1F.6080301-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-01-27 11:03             ` Roger Quadros
     [not found]               ` <52E63D08.6080704-l0cyMroinI0@public.gmane.org>
2014-01-27 11:28                 ` Hans de Goede
     [not found]                   ` <52E642F7.3000308-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-01-27 14:27                     ` Roger Quadros
2014-01-22 19:04   ` [PATCH v5 08/14] ahci-platform: "Library-ise" suspend / resume functionality Hans de Goede
2014-02-03 14:53     ` Arnd Bergmann
     [not found]       ` <201402031553.46083.arnd-r2nGTMty4D4@public.gmane.org>
2014-02-04 10:20         ` Hans de Goede
2014-01-22 19:04   ` [PATCH v5 09/14] ARM: sunxi: Add support for Allwinner SUNXi SoCs sata to ahci_platform Hans de Goede
2014-01-22 19:04   ` [PATCH v5 10/14] ahci-imx: Port to library-ised ahci_platform Hans de Goede
2014-01-22 19:04   ` Hans de Goede [this message]
2014-01-22 19:04   ` [PATCH v5 12/14] ahci-imx: Fix link not coming back up after suspend / resume Hans de Goede
2014-01-22 19:04   ` [PATCH v5 13/14] ARM: sun4i: dts: Add ahci / sata support Hans de Goede
     [not found]     ` <1390417489-5354-14-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-01-23  8:34       ` Chen-Yu Tsai
     [not found]         ` <CAGb2v65mYK7Lo_KC+sGvYG7P2kDOy7CZgGane2eY8+-pMvH1mw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-01-23 14:48           ` Hans de Goede
2014-01-31 13:45       ` Maxime Ripard
2014-02-03 10:35         ` Hans de Goede
     [not found]           ` <52EF70E2.6070803-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-02-04  9:44             ` Maxime Ripard
2014-01-22 19:04   ` [PATCH v5 14/14] ARM: sun7i: " Hans de Goede
     [not found]     ` <1390417489-5354-15-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-01-31 13:46       ` Maxime Ripard
2014-02-03 22:10         ` Hans de Goede
2014-02-03 16:09   ` [PATCH v5 00/14] ahci: library-ise ahci_platform, add sunxi driver and cleanup imx driver Tejun Heo
     [not found]     ` <20140203160936.GC30250-Gd/HAXX7CRxy/B6EtB590w@public.gmane.org>
2014-02-03 22:07       ` Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1390417489-5354-12-git-send-email-hdegoede@redhat.com \
    --to=hdegoede-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
    --cc=Hong-Xing.Zhu-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-ide-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
    --cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
    --cc=oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org \
    --cc=rogerq-l0cyMroinI0@public.gmane.org \
    --cc=tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).