devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Tejun Heo <tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Oliver Schinagl <oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org>,
	Maxime Ripard
	<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
	Richard Zhu
	<Hong-Xing.Zhu-KZfg59tc24xl57MIdRCFDg@public.gmane.org>,
	Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>,
	linux-ide-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
	Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH v5 03/14] ahci-platform: Pass ahci_host_priv ptr to ahci_platform_data init method
Date: Wed, 22 Jan 2014 20:04:38 +0100	[thread overview]
Message-ID: <1390417489-5354-4-git-send-email-hdegoede@redhat.com> (raw)
In-Reply-To: <1390417489-5354-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>

Some ahci_platform_data->init methods need access to the ahci_host_priv data.

When calling ahci_platform_data->init the ata_host has not been allocated yet,
so access to ahci_host_priv through the dev argument is not possible.

Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 arch/arm/mach-davinci/devices-da8xx.c |  5 +++--
 arch/arm/mach-spear/spear1340.c       |  2 +-
 drivers/ata/ahci_imx.c                | 12 ++++++------
 drivers/ata/ahci_platform.c           |  2 +-
 include/linux/ahci_platform.h         |  3 ++-
 5 files changed, 13 insertions(+), 11 deletions(-)

diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 78829c5..28e7c4c 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -14,6 +14,7 @@
 #include <linux/platform_device.h>
 #include <linux/dma-contiguous.h>
 #include <linux/serial_8250.h>
+#include <linux/ahci.h>
 #include <linux/ahci_platform.h>
 #include <linux/clk.h>
 #include <linux/reboot.h>
@@ -1061,7 +1062,7 @@ static unsigned long da850_sata_xtal[] = {
 	KHZ_TO_HZ(60000),
 };
 
-static int da850_sata_init(struct device *dev, void __iomem *addr)
+static int da850_sata_init(struct device *dev, struct ahci_host_priv *hpriv)
 {
 	int i, ret;
 	unsigned int val;
@@ -1096,7 +1097,7 @@ static int da850_sata_init(struct device *dev, void __iomem *addr)
 		SATA_PHY_TXSWING(3) |
 		SATA_PHY_ENPLL(1);
 
-	__raw_writel(val, addr + SATA_P0PHYCR_REG);
+	__raw_writel(val, hpriv->mmio + SATA_P0PHYCR_REG);
 
 	return 0;
 
diff --git a/arch/arm/mach-spear/spear1340.c b/arch/arm/mach-spear/spear1340.c
index 3fb6834..9e2f3ac 100644
--- a/arch/arm/mach-spear/spear1340.c
+++ b/arch/arm/mach-spear/spear1340.c
@@ -77,7 +77,7 @@
 			SPEAR1340_MIPHY_PLL_RATIO_TOP(25))
 
 /* SATA device registration */
-static int sata_miphy_init(struct device *dev, void __iomem *addr)
+static int sata_miphy_init(struct device *dev, struct ahci_host_priv *hpriv)
 {
 	writel(SPEAR1340_SATA_CFG_VAL, SPEAR1340_PCIE_SATA_CFG);
 	writel(SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK,
diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c
index 3e23e99..49fa0ca 100644
--- a/drivers/ata/ahci_imx.c
+++ b/drivers/ata/ahci_imx.c
@@ -91,7 +91,7 @@ static const struct ata_port_info ahci_imx_port_info = {
 	.port_ops	= &ahci_imx_ops,
 };
 
-static int imx6q_sata_init(struct device *dev, void __iomem *mmio)
+static int imx6q_sata_init(struct device *dev, struct ahci_host_priv *hpriv)
 {
 	int ret = 0;
 	unsigned int reg_val;
@@ -145,19 +145,19 @@ static int imx6q_sata_init(struct device *dev, void __iomem *mmio)
 	 * Implement the port0.
 	 * Get the ahb clock rate, and configure the TIMER1MS register.
 	 */
-	reg_val = readl(mmio + HOST_CAP);
+	reg_val = readl(hpriv->mmio + HOST_CAP);
 	if (!(reg_val & HOST_CAP_SSS)) {
 		reg_val |= HOST_CAP_SSS;
-		writel(reg_val, mmio + HOST_CAP);
+		writel(reg_val, hpriv->mmio + HOST_CAP);
 	}
-	reg_val = readl(mmio + HOST_PORTS_IMPL);
+	reg_val = readl(hpriv->mmio + HOST_PORTS_IMPL);
 	if (!(reg_val & 0x1)) {
 		reg_val |= 0x1;
-		writel(reg_val, mmio + HOST_PORTS_IMPL);
+		writel(reg_val, hpriv->mmio + HOST_PORTS_IMPL);
 	}
 
 	reg_val = clk_get_rate(imxpriv->ahb_clk) / 1000;
-	writel(reg_val, mmio + HOST_TIMER1MS);
+	writel(reg_val, hpriv->mmio + HOST_TIMER1MS);
 
 	return 0;
 }
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 4b231ba..434ab89 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -149,7 +149,7 @@ static int ahci_probe(struct platform_device *pdev)
 	 * returned successfully.
 	 */
 	if (pdata && pdata->init) {
-		rc = pdata->init(dev, hpriv->mmio);
+		rc = pdata->init(dev, hpriv);
 		if (rc)
 			goto disable_unprepare_clk;
 	}
diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h
index 73a2500..737fe38 100644
--- a/include/linux/ahci_platform.h
+++ b/include/linux/ahci_platform.h
@@ -19,9 +19,10 @@
 
 struct device;
 struct ata_port_info;
+struct ahci_host_priv;
 
 struct ahci_platform_data {
-	int (*init)(struct device *dev, void __iomem *addr);
+	int (*init)(struct device *dev, struct ahci_host_priv *hpriv);
 	void (*exit)(struct device *dev);
 	int (*suspend)(struct device *dev);
 	int (*resume)(struct device *dev);
-- 
1.8.5.3

  parent reply	other threads:[~2014-01-22 19:04 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-22 19:04 [PATCH v5 00/14] ahci: library-ise ahci_platform, add sunxi driver and cleanup imx driver Hans de Goede
     [not found] ` <1390417489-5354-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-01-22 19:04   ` [PATCH v5 01/14] libahci: Allow drivers to override start_engine Hans de Goede
2014-01-22 19:04   ` [PATCH v5 02/14] libahci: Move ahci_host_priv declaration to include/linux/ahci.h Hans de Goede
2014-01-22 19:04   ` Hans de Goede [this message]
2014-01-22 19:04   ` [PATCH v5 04/14] ahci-platform: Add support for devices with more then 1 clock Hans de Goede
2014-01-22 19:04   ` [PATCH v5 05/14] ahci-platform: Add support for an optional regulator for sata-target power Hans de Goede
2014-01-22 19:04   ` [PATCH v5 06/14] ahci-platform: Add enable_ / disable_resources helper functions Hans de Goede
2014-01-22 19:04   ` [PATCH v5 07/14] ahci-platform: "Library-ise" ahci_probe functionality Hans de Goede
2014-01-27 10:39     ` Roger Quadros
     [not found]       ` <52E63778.5000509-l0cyMroinI0@public.gmane.org>
2014-01-27 10:51         ` Hans de Goede
     [not found]           ` <52E63A1F.6080301-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-01-27 11:03             ` Roger Quadros
     [not found]               ` <52E63D08.6080704-l0cyMroinI0@public.gmane.org>
2014-01-27 11:28                 ` Hans de Goede
     [not found]                   ` <52E642F7.3000308-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-01-27 14:27                     ` Roger Quadros
2014-01-22 19:04   ` [PATCH v5 08/14] ahci-platform: "Library-ise" suspend / resume functionality Hans de Goede
2014-02-03 14:53     ` Arnd Bergmann
     [not found]       ` <201402031553.46083.arnd-r2nGTMty4D4@public.gmane.org>
2014-02-04 10:20         ` Hans de Goede
2014-01-22 19:04   ` [PATCH v5 09/14] ARM: sunxi: Add support for Allwinner SUNXi SoCs sata to ahci_platform Hans de Goede
2014-01-22 19:04   ` [PATCH v5 10/14] ahci-imx: Port to library-ised ahci_platform Hans de Goede
2014-01-22 19:04   ` [PATCH v5 11/14] ahci-imx: Add imx_ahci_phy_init / _exit helpers Hans de Goede
2014-01-22 19:04   ` [PATCH v5 12/14] ahci-imx: Fix link not coming back up after suspend / resume Hans de Goede
2014-01-22 19:04   ` [PATCH v5 13/14] ARM: sun4i: dts: Add ahci / sata support Hans de Goede
     [not found]     ` <1390417489-5354-14-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-01-23  8:34       ` Chen-Yu Tsai
     [not found]         ` <CAGb2v65mYK7Lo_KC+sGvYG7P2kDOy7CZgGane2eY8+-pMvH1mw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-01-23 14:48           ` Hans de Goede
2014-01-31 13:45       ` Maxime Ripard
2014-02-03 10:35         ` Hans de Goede
     [not found]           ` <52EF70E2.6070803-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-02-04  9:44             ` Maxime Ripard
2014-01-22 19:04   ` [PATCH v5 14/14] ARM: sun7i: " Hans de Goede
     [not found]     ` <1390417489-5354-15-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-01-31 13:46       ` Maxime Ripard
2014-02-03 22:10         ` Hans de Goede
2014-02-03 16:09   ` [PATCH v5 00/14] ahci: library-ise ahci_platform, add sunxi driver and cleanup imx driver Tejun Heo
     [not found]     ` <20140203160936.GC30250-Gd/HAXX7CRxy/B6EtB590w@public.gmane.org>
2014-02-03 22:07       ` Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1390417489-5354-4-git-send-email-hdegoede@redhat.com \
    --to=hdegoede-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
    --cc=Hong-Xing.Zhu-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-ide-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
    --cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
    --cc=oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org \
    --cc=rogerq-l0cyMroinI0@public.gmane.org \
    --cc=tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).