From: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org>
Cc: Florian Fainelli
<f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
linux-usb <linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH v8 3/4] ohci-platform: Add support for controllers with big-endian regs / descriptors
Date: Wed, 22 Jan 2014 20:32:56 +0100 [thread overview]
Message-ID: <1390419177-6481-4-git-send-email-hdegoede@redhat.com> (raw)
In-Reply-To: <1390419177-6481-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Note this commit uses the same devicetree booleans for this as the ones
already existing in the usb-ehci bindings, see:
Documentation/devicetree/bindings/usb/usb-ehci.txt
Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
Documentation/devicetree/bindings/usb/usb-ohci.txt | 3 +++
drivers/usb/host/ohci-platform.c | 27 ++++++++++++++++++++++
2 files changed, 30 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt
index 6ba38d9..6933b0c 100644
--- a/Documentation/devicetree/bindings/usb/usb-ohci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt
@@ -6,6 +6,9 @@ Required properties:
- interrupts : ohci controller interrupt
Optional properties:
+- big-endian-regs : boolean, set this for hcds with big-endian registers
+- big-endian-desc : boolean, set this for hcds with big-endian descriptors
+- big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
- clocks : a list of phandle + clock specifier pairs
- phys : phandle + phy specifier pair
- phy-names : "usb"
diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
index b2d0e1e..71e9d8e 100644
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -128,6 +128,7 @@ static int ohci_platform_probe(struct platform_device *dev)
struct resource *res_mem;
struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
struct ohci_platform_priv *priv;
+ struct ohci_hcd *ohci;
int err, irq, clk = 0;
if (usb_disabled())
@@ -164,8 +165,34 @@ static int ohci_platform_probe(struct platform_device *dev)
platform_set_drvdata(dev, hcd);
dev->dev.platform_data = pdata;
priv = hcd_to_ohci_priv(hcd);
+ ohci = hcd_to_ohci(hcd);
if (pdata == &ohci_platform_defaults && dev->dev.of_node) {
+ if (of_property_read_bool(dev->dev.of_node, "big-endian-regs"))
+ ohci->flags |= OHCI_QUIRK_BE_MMIO;
+
+ if (of_property_read_bool(dev->dev.of_node, "big-endian-desc"))
+ ohci->flags |= OHCI_QUIRK_BE_DESC;
+
+ if (of_property_read_bool(dev->dev.of_node, "big-endian"))
+ ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC;
+
+#ifndef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
+ if (ohci->flags & OHCI_QUIRK_BE_MMIO) {
+ dev_err(&dev->dev,
+ "Error big-endian-regs not compiled in\n");
+ err = -EINVAL;
+ goto err_put_hcd;
+ }
+#endif
+#ifndef CONFIG_USB_OHCI_BIG_ENDIAN_DESC
+ if (ohci->flags & OHCI_QUIRK_BE_DESC) {
+ dev_err(&dev->dev,
+ "Error big-endian-desc not compiled in\n");
+ err = -EINVAL;
+ goto err_put_hcd;
+ }
+#endif
priv->phy = devm_phy_get(&dev->dev, "usb");
if (IS_ERR(priv->phy)) {
err = PTR_ERR(priv->phy);
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-01-22 19:32 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-22 19:32 [PATCH v8 0/4] ohci and ehci-platform clks, phy, be and dt support Hans de Goede
[not found] ` <1390419177-6481-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-01-22 19:32 ` [PATCH v8 1/4] ohci-platform: Add support for devicetree instantiation Hans de Goede
2014-01-22 19:32 ` [PATCH v8 2/4] ehci-platform: Add support for clks and phy passed through devicetree Hans de Goede
2014-01-22 19:32 ` Hans de Goede [this message]
[not found] ` <1390419177-6481-4-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-01-22 20:46 ` [PATCH v8 3/4] ohci-platform: Add support for controllers with big-endian regs / descriptors Sergei Shtylyov
2014-01-22 19:32 ` [PATCH v8 4/4] ehci-platform: " Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1390419177-6481-4-git-send-email-hdegoede@redhat.com \
--to=hdegoede-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).