From: Ashutosh singh <ashuleapyear-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Ashutosh singh
<ashutosh.s-mS2nBM426Az/PtFMR13I2A@public.gmane.org>
Subject: [PATCH] ARM-i.MX6Q-dts : Added USB_OTG Support
Date: Fri, 24 Jan 2014 14:58:44 +0530 [thread overview]
Message-ID: <1390555724-9779-1-git-send-email-ashutosh.s@phytec.in> (raw)
This patch adds support for USB_OTG on Phytec phyFLEX-i.MX6 Quad module.
Signed-off-by: Ashutosh singh <ashutosh.s-mS2nBM426Az/PtFMR13I2A@public.gmane.org>
---
arch/arm/boot/dts/imx6q-phytec-pbab01.dts | 4 ++++
arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi | 22 ++++++++++++++++++++++
2 files changed, 26 insertions(+)
diff --git a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
index 7d37ec6..39e69bd 100644
--- a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
+++ b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
@@ -32,3 +32,7 @@
&usdhc3 {
status = "okay";
};
+
+&usbotg {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
index 1a3b50d..dcb1d59 100644
--- a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
@@ -18,6 +18,19 @@
memory {
reg = <0x10000000 0x80000000>;
};
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_usb_otg_vbus: usb_otg_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 15 0>;
+ enable-active-low;
+ };
+ };
};
&ecspi3 {
@@ -134,6 +147,7 @@
MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000 /* PMIC interrupt */
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* USB_OTG_PWR_EN */
>;
};
};
@@ -178,3 +192,11 @@
wp-gpios = <&gpio1 29 0>;
status = "disabled";
};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg_1>;
+ disable-over-current;
+ status = "disabled";
+};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2014-01-24 9:28 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-24 9:28 Ashutosh singh [this message]
[not found] ` <1390555724-9779-1-git-send-email-ashutosh.s-mS2nBM426Az/PtFMR13I2A@public.gmane.org>
2014-01-24 11:50 ` [PATCH] ARM-i.MX6Q-dts : Added USB_OTG Support Mark Rutland
[not found] ` <20140124115005.GG814-NuALmloUBlrZROr8t4l/smS4ubULX0JqMm0uRHvK7Nw@public.gmane.org>
2014-01-24 12:15 ` Fabio Estevam
2014-01-24 15:34 ` Mark Rutland
2014-01-24 15:32 ` Shawn Guo
2014-01-24 22:04 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1390555724-9779-1-git-send-email-ashutosh.s@phytec.in \
--to=ashuleapyear-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=ashutosh.s-mS2nBM426Az/PtFMR13I2A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).