From mboxrd@z Thu Jan 1 00:00:00 1970 From: Matt Porter Subject: [PATCH 2/6] regulator: add bcm59056 pmu DT binding Date: Tue, 4 Feb 2014 07:19:08 -0500 Message-ID: <1391516352-32359-3-git-send-email-mporter@linaro.org> References: <1391516352-32359-1-git-send-email-mporter@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1391516352-32359-1-git-send-email-mporter@linaro.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Wolfram Sang , Tim Kryger , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Samuel Ortiz , Lee Jones , Liam Girdwood , Mark Brown , Christian Daudt Cc: Devicetree List , Linux I2C List , Linux ARM Kernel List , Linux Kernel Mailing List List-Id: devicetree@vger.kernel.org Add a DT binding for the BCM59056 PMU. The binding inherits from the generic regulator bindings. Signed-off-by: Matt Porter Reviewed-by: Tim Kryger Reviewed-by: Markus Mayer --- .../devicetree/bindings/regulator/bcm59056.txt | 37 ++++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/bcm59056.txt diff --git a/Documentation/devicetree/bindings/regulator/bcm59056.txt b/Documentation/devicetree/bindings/regulator/bcm59056.txt new file mode 100644 index 0000000..bf6b633 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/bcm59056.txt @@ -0,0 +1,37 @@ +BCM59056 Power Management Unit + +Required properties: +- compatible: "brcm,bcm59056" +- reg: I2C slave address +- interrupts: interrupt for the PMU. Generic interrupt client node bindings + are described in interrupt-controller/interrupts.txt +- regulators: This is the list of child nodes that specify the regulator + initialization data for defined regulators. Generic regulator bindings + are described in regulator/regulator.txt. + + The valid regulator-compatible values are: + rfldo, camldo1, camldo2, simldo1, simlso2, sdldo, sdxldo, + mmcldo1, mmcldo2, audldo, micldo, usbldo, vibldo, + csr, iosr1, iosr2, msr, sdsr1, sdsr2, vsr + +Example: + pmu: bcm59056@8 { + compatible = "brcm,bcm59056"; + reg = <0x08>; + interrupts = ; + regulators { + #address-cells = <1>; + #size-cells = <0>; + + rfldo_reg: regulator@0 { + reg = <0>; + regulator-compatible = "rfldo"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ... + }; + }; -- 1.8.4