From: Matt Ranostay <mranostay@gmail.com>
To: linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
devicetree@vger.kernel.org
Cc: matt.porter@linaro.org, pantelis.antoniou@gmail.com,
Matt Ranostay <mranostay@gmail.com>
Subject: [PATCH 1/2] iio:as3935: Add DT binding docs for AS3935 driver
Date: Wed, 5 Feb 2014 23:00:14 -0800 [thread overview]
Message-ID: <1391670015-6551-2-git-send-email-mranostay@gmail.com> (raw)
In-Reply-To: <1391670015-6551-1-git-send-email-mranostay@gmail.com>
Document compatible string, required and optional DT properties for
AS3935 chipset driver.
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
---
.../devicetree/bindings/iio/proximity/as3935.txt | 28 ++++++++++++++++++++++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
2 files changed, 29 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/proximity/as3935.txt
diff --git a/Documentation/devicetree/bindings/iio/proximity/as3935.txt b/Documentation/devicetree/bindings/iio/proximity/as3935.txt
new file mode 100644
index 0000000..574d49c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/as3935.txt
@@ -0,0 +1,28 @@
+Austrian Microsystems AS3935 Franklin lightning sensor device driver
+
+Required properties:
+ - compatible: must be "ams,as3935"
+ - reg: SPI chip select number for the device
+ - spi-cpha: SPI Mode 1. Refer to spi/spi-bus.txt for generic SPI
+ slave node bindings.
+ - interrupt-parent : should be the phandle for the interrupt controller
+ - interrupts : interrupt mapping for GPIO IRQ
+
+ Refer to interrupt-controller/interrupts.txt for generic
+ interrupt client node bindings.
+
+Optional properties:
+ - ams,tune-cap: Calibration tuning capacitor stepping value 0 - 15.
+ Range of 0 to 120 pF, 8pF steps. This will require using the
+ calibration data from the manufacturer.
+
+Example:
+
+as3935@0 {
+ compatible = "ams,as3935";
+ reg = <0>;
+ spi-cpha;
+ interrupt-parent = <&gpio1>;
+ interrupts = <16 1>;
+ ams,tune-cap = <10>;
+};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 3c31b40..9dd66ca 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -10,6 +10,7 @@ aeroflexgaisler Aeroflex Gaisler AB
ak Asahi Kasei Corp.
altr Altera Corp.
amcc Applied Micro Circuits Corporation (APM, formally AMCC)
+ams AMS AG
amstaos AMS-Taos Inc.
apm Applied Micro Circuits Corporation (APM)
arm ARM Ltd.
--
1.8.3.2
next prev parent reply other threads:[~2014-02-06 7:00 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-06 7:00 [PATCH 0/2] AS3935 lightning sensor support Matt Ranostay
2014-02-06 7:00 ` Matt Ranostay [this message]
[not found] ` <1391670015-6551-2-git-send-email-mranostay-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-02-09 21:54 ` [PATCH 1/2] iio:as3935: Add DT binding docs for AS3935 driver Jonathan Cameron
[not found] ` <52F7F92E.9040508-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2014-02-09 23:16 ` Matt Ranostay
[not found] ` <1391670015-6551-1-git-send-email-mranostay-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-02-06 7:00 ` [PATCH 2/2] iio: Add AS3935 lightning sensor support Matt Ranostay
[not found] ` <1391670015-6551-3-git-send-email-mranostay-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-02-09 21:48 ` Jonathan Cameron
[not found] ` <52F7F79C.1010001-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2014-02-09 23:32 ` Matt Ranostay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1391670015-6551-2-git-send-email-mranostay@gmail.com \
--to=mranostay@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=matt.porter@linaro.org \
--cc=pantelis.antoniou@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).