[PATCH v4 0/5] clk: sunxi usb clks support

[PATCH v4 0/5] clk: sunxi usb clks support

[Hans de Goede]

Hi All,

And here is v4 of my sunxi usb clks support series.

Changes since v2:
-rename the compatibilty strings from foo-usb-gates-clk to foo-usb-clk

Changes since v3:
-rename the compatibilty string for sun4i-usb-clk to sun4i-a10-usb-clk

Note the dts bits (patches 3-5) of this series depends on Chen-Yu Tsai's clk
rename series.

Emilio, should Mike pick patches 1-2 up directly, or should they go through
your tree?

Maxime, can you please add patches 3-5 to your dts tree ? Assuming that
wens clk rename patches are already there.

Thanks & Regards,

Hans

[PATCH v4 1/5] clk: sunxi: Add support for USB clock-register reset bits

[Hans de Goede]

The usb-clk register is special in that it not only contains clk gate bits,
but also has a few reset bits. This commit adds support for this by allowing
gates type sunxi clks to also register a reset controller.

Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 drivers/clk/sunxi/clk-sunxi.c | 71 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 71 insertions(+)

diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index 64bda21..1e15e4c 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -18,6 +18,7 @@
 #include <linux/clkdev.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/reset-controller.h>
 
 #include "clk-factors.h"
 
@@ -838,6 +839,59 @@ static void __init sunxi_divider_clk_setup(struct device_node *node,
 
 
 /**
+ * sunxi_gates_reset... - reset bits in leaf gate clk registers handling
+ */
+
+struct gates_reset_data {
+	void __iomem			*reg;
+	spinlock_t			*lock;
+	struct reset_controller_dev	rcdev;
+};
+
+static int sunxi_gates_reset_assert(struct reset_controller_dev *rcdev,
+			      unsigned long id)
+{
+	struct gates_reset_data *data = container_of(rcdev,
+						     struct gates_reset_data,
+						     rcdev);
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(data->lock, flags);
+
+	reg = readl(data->reg);
+	writel(reg & ~BIT(id), data->reg);
+
+	spin_unlock_irqrestore(data->lock, flags);
+
+	return 0;
+}
+
+static int sunxi_gates_reset_deassert(struct reset_controller_dev *rcdev,
+				unsigned long id)
+{
+	struct gates_reset_data *data = container_of(rcdev,
+						     struct gates_reset_data,
+						     rcdev);
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(data->lock, flags);
+
+	reg = readl(data->reg);
+	writel(reg | BIT(id), data->reg);
+
+	spin_unlock_irqrestore(data->lock, flags);
+
+	return 0;
+}
+
+static struct reset_control_ops sunxi_gates_reset_ops = {
+	.assert		= sunxi_gates_reset_assert,
+	.deassert	= sunxi_gates_reset_deassert,
+};
+
+/**
  * sunxi_gates_clk_setup() - Setup function for leaf gates on clocks
  */
 
@@ -845,6 +899,7 @@ static void __init sunxi_divider_clk_setup(struct device_node *node,
 
 struct gates_data {
 	DECLARE_BITMAP(mask, SUNXI_GATES_MAX_SIZE);
+	u32 reset_mask;
 };
 
 static const struct gates_data sun4i_axi_gates_data __initconst = {
@@ -915,6 +970,7 @@ static void __init sunxi_gates_clk_setup(struct device_node *node,
 					 struct gates_data *data)
 {
 	struct clk_onecell_data *clk_data;
+	struct gates_reset_data *reset_data;
 	const char *clk_parent;
 	const char *clk_name;
 	void *reg;
@@ -958,6 +1014,21 @@ static void __init sunxi_gates_clk_setup(struct device_node *node,
 	clk_data->clk_num = i;
 
 	of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+	/* Register a reset controler for gates with reset bits */
+	if (data->reset_mask == 0)
+		return;
+
+	reset_data = kzalloc(sizeof(*reset_data), GFP_KERNEL);
+	if (!reset_data)
+		return;
+
+	reset_data->reg = reg;
+	reset_data->lock = &clk_lock;
+	reset_data->rcdev.nr_resets = __fls(data->reset_mask) + 1;
+	reset_data->rcdev.ops = &sunxi_gates_reset_ops;
+	reset_data->rcdev.of_node = node;
+	reset_controller_register(&reset_data->rcdev);
 }
 
 
-- 
1.8.4.2

Re: [PATCH v4 1/5] clk: sunxi: Add support for USB clock-register reset bits

[Philipp Zabel]

Am Freitag, den 07.02.2014, 16:21 +0100 schrieb Hans de Goede:
> The usb-clk register is special in that it not only contains clk gate bits,
> but also has a few reset bits. This commit adds support for this by allowing
> gates type sunxi clks to also register a reset controller.
> 
> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>

Acked-by: Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>

> ---
>  drivers/clk/sunxi/clk-sunxi.c | 71 +++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 71 insertions(+)
> 
> diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
> index 64bda21..1e15e4c 100644
> --- a/drivers/clk/sunxi/clk-sunxi.c
> +++ b/drivers/clk/sunxi/clk-sunxi.c
> @@ -18,6 +18,7 @@
>  #include <linux/clkdev.h>
>  #include <linux/of.h>
>  #include <linux/of_address.h>
> +#include <linux/reset-controller.h>
>  
>  #include "clk-factors.h"
>  
> @@ -838,6 +839,59 @@ static void __init sunxi_divider_clk_setup(struct device_node *node,
>  
> 
>  /**
> + * sunxi_gates_reset... - reset bits in leaf gate clk registers handling
> + */
> +
> +struct gates_reset_data {
> +	void __iomem			*reg;
> +	spinlock_t			*lock;
> +	struct reset_controller_dev	rcdev;
> +};
> +
> +static int sunxi_gates_reset_assert(struct reset_controller_dev *rcdev,
> +			      unsigned long id)
> +{
> +	struct gates_reset_data *data = container_of(rcdev,
> +						     struct gates_reset_data,
> +						     rcdev);
> +	unsigned long flags;
> +	u32 reg;
> +
> +	spin_lock_irqsave(data->lock, flags);
> +
> +	reg = readl(data->reg);
> +	writel(reg & ~BIT(id), data->reg);
> +
> +	spin_unlock_irqrestore(data->lock, flags);
> +
> +	return 0;
> +}
> +
> +static int sunxi_gates_reset_deassert(struct reset_controller_dev *rcdev,
> +				unsigned long id)
> +{
> +	struct gates_reset_data *data = container_of(rcdev,
> +						     struct gates_reset_data,
> +						     rcdev);
> +	unsigned long flags;
> +	u32 reg;
> +
> +	spin_lock_irqsave(data->lock, flags);
> +
> +	reg = readl(data->reg);
> +	writel(reg | BIT(id), data->reg);
> +
> +	spin_unlock_irqrestore(data->lock, flags);
> +
> +	return 0;
> +}
> +
> +static struct reset_control_ops sunxi_gates_reset_ops = {
> +	.assert		= sunxi_gates_reset_assert,
> +	.deassert	= sunxi_gates_reset_deassert,
> +};
> +
> +/**
>   * sunxi_gates_clk_setup() - Setup function for leaf gates on clocks
>   */
>  
> @@ -845,6 +899,7 @@ static void __init sunxi_divider_clk_setup(struct device_node *node,
>  
>  struct gates_data {
>  	DECLARE_BITMAP(mask, SUNXI_GATES_MAX_SIZE);
> +	u32 reset_mask;
>  };
>  
>  static const struct gates_data sun4i_axi_gates_data __initconst = {
> @@ -915,6 +970,7 @@ static void __init sunxi_gates_clk_setup(struct device_node *node,
>  					 struct gates_data *data)
>  {
>  	struct clk_onecell_data *clk_data;
> +	struct gates_reset_data *reset_data;
>  	const char *clk_parent;
>  	const char *clk_name;
>  	void *reg;
> @@ -958,6 +1014,21 @@ static void __init sunxi_gates_clk_setup(struct device_node *node,
>  	clk_data->clk_num = i;
>  
>  	of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
> +
> +	/* Register a reset controler for gates with reset bits */
> +	if (data->reset_mask == 0)
> +		return;
> +
> +	reset_data = kzalloc(sizeof(*reset_data), GFP_KERNEL);
> +	if (!reset_data)
> +		return;
> +
> +	reset_data->reg = reg;
> +	reset_data->lock = &clk_lock;
> +	reset_data->rcdev.nr_resets = __fls(data->reset_mask) + 1;
> +	reset_data->rcdev.ops = &sunxi_gates_reset_ops;
> +	reset_data->rcdev.of_node = node;
> +	reset_controller_register(&reset_data->rcdev);
>  }
>  
> 

Re: [PATCH v4 1/5] clk: sunxi: Add support for USB clock-register reset bits

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 589 bytes --]

On Fri, Feb 07, 2014 at 04:21:49PM +0100, Hans de Goede wrote:
> The usb-clk register is special in that it not only contains clk gate bits,
> but also has a few reset bits. This commit adds support for this by allowing
> gates type sunxi clks to also register a reset controller.
> 
> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>

Acked-by: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>

Thanks!

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH v4 2/5] clk: sunxi: Add USB clock register defintions

[Hans de Goede]

From: Roman Byshko <rbyshko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Add register definitions for the usb-clk register found on sun4i, sun5i and
sun7i SoCs.

Signed-off-by: Roman Byshko <rbyshko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 Documentation/devicetree/bindings/clock/sunxi.txt |  5 +++++
 drivers/clk/sunxi/clk-sunxi.c                     | 12 ++++++++++++
 2 files changed, 17 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
index 27f19f1..5aa8d6d 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -38,6 +38,8 @@ Required properties:
 	"allwinner,sun4i-mod0-clk" - for the module 0 family of clocks
 	"allwinner,sun7i-a20-out-clk" - for the external output clocks
 	"allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31
+	"allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20
+	"allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13
 
 Required properties for all clocks:
 - reg : shall be the control register address for the clock.
@@ -54,6 +56,9 @@ Required properties for all clocks:
 For "allwinner,sun7i-a20-gmac-clk", the parent clocks shall be fixed rate
 dummy clocks at 25 MHz and 125 MHz, respectively. See example.
 
+And "allwinner,*-usb-clk" clocks also require:
+- reset-cells : shall be set to 1
+
 Clock consumers should specify the desired clocks they use with a
 "clocks" phandle cell. Consumers that are using a gated clock should
 provide an additional ID in their clock property. This ID is the
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index 1e15e4c..61e57d2 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -910,6 +910,16 @@ static const struct gates_data sun4i_ahb_gates_data __initconst = {
 	.mask = {0x7F77FFF, 0x14FB3F},
 };
 
+static const struct gates_data sun4i_a10_usb_gates_data __initconst = {
+	.mask = {0x1C0},
+	.reset_mask = 0x07,
+};
+
+static const struct gates_data sun5i_a13_usb_gates_data __initconst = {
+	.mask = {0x140},
+	.reset_mask = 0x03,
+};
+
 static const struct gates_data sun5i_a10s_ahb_gates_data __initconst = {
 	.mask = {0x147667e7, 0x185915},
 };
@@ -1257,6 +1267,8 @@ static const struct of_device_id clk_gates_match[] __initconst = {
 	{.compatible = "allwinner,sun6i-a31-apb1-gates-clk", .data = &sun6i_a31_apb1_gates_data,},
 	{.compatible = "allwinner,sun7i-a20-apb1-gates-clk", .data = &sun7i_a20_apb1_gates_data,},
 	{.compatible = "allwinner,sun6i-a31-apb2-gates-clk", .data = &sun6i_a31_apb2_gates_data,},
+	{.compatible = "allwinner,sun4i-a10-usb-clk", .data = &sun4i_a10_usb_gates_data,},
+	{.compatible = "allwinner,sun5i-a13-usb-clk", .data = &sun5i_a13_usb_gates_data,},
 	{}
 };
 
-- 
1.8.4.2

Re: [PATCH v4 2/5] clk: sunxi: Add USB clock register defintions

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 627 bytes --]

On Fri, Feb 07, 2014 at 04:21:50PM +0100, Hans de Goede wrote:
> From: Roman Byshko <rbyshko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> 
> Add register definitions for the usb-clk register found on sun4i, sun5i and
> sun7i SoCs.
> 
> Signed-off-by: Roman Byshko <rbyshko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>

Acked-by: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH v4 3/5] ARM: sun4i: dt: Add bindings for USB clocks

[Hans de Goede]

From: Roman Byshko <rbyshko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Signed-off-by: Roman Byshko <rbyshko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 arch/arm/boot/dts/sun4i-a10.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index ebb4cd0..8d10f27 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -301,6 +301,15 @@
 			clock-output-names = "ir1";
 		};
 
+		usb_clk: clk@01c200cc {
+			#clock-cells = <1>;
+		        #reset-cells = <1>;
+			compatible = "allwinner,sun4i-a10-usb-clk";
+			reg = <0x01c200cc 0x4>;
+			clocks = <&pll6 1>;
+			clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
+		};
+
 		spi3_clk: clk@01c200d4 {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun4i-mod0-clk";
-- 
1.8.4.2

[PATCH v4 4/5] ARM: sun5i: dt: Add bindings for USB clocks

[Hans de Goede]

From: Roman Byshko <rbyshko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Signed-off-by: Roman Byshko <rbyshko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 arch/arm/boot/dts/sun5i-a10s.dtsi | 9 +++++++++
 arch/arm/boot/dts/sun5i-a13.dtsi  | 9 +++++++++
 2 files changed, 18 insertions(+)

diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index 38d01bd..2ed7429 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -264,6 +264,15 @@
 			clock-output-names = "ir0";
 		};
 
+		usb_clk: clk@01c200cc {
+			#clock-cells = <1>;
+		        #reset-cells = <1>;
+			compatible = "allwinner,sun5i-a13-usb-clk";
+			reg = <0x01c200cc 0x4>;
+			clocks = <&pll6 1>;
+			clock-output-names = "usb_ohci0", "usb_phy";
+		};
+
 		mbus_clk: clk@01c2015c {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun4i-mod0-clk";
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index ddd39d3..30ece67 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -261,6 +261,15 @@
 			clock-output-names = "ir0";
 		};
 
+		usb_clk: clk@01c200cc {
+			#clock-cells = <1>;
+		        #reset-cells = <1>;
+			compatible = "allwinner,sun5i-a13-usb-clk";
+			reg = <0x01c200cc 0x4>;
+			clocks = <&pll6 1>;
+			clock-output-names = "usb_ohci0", "usb_phy";
+		};
+
 		mbus_clk: clk@01c2015c {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun4i-mod0-clk";
-- 
1.8.4.2

[PATCH v4 5/5] ARM: sun7i: dt: Add bindings for USB clocks

[Hans de Goede]

From: Roman Byshko <rbyshko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Signed-off-by: Roman Byshko <rbyshko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 arch/arm/boot/dts/sun7i-a20.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 316cab8..14d9696 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -289,6 +289,15 @@
 			clock-output-names = "ir1";
 		};
 
+		usb_clk: clk@01c200cc {
+			#clock-cells = <1>;
+		        #reset-cells = <1>;
+			compatible = "allwinner,sun4i-a10-usb-clk";
+			reg = <0x01c200cc 0x4>;
+			clocks = <&pll6 1>;
+			clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
+		};
+
 		spi3_clk: clk@01c200d4 {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun4i-mod0-clk";
-- 
1.8.4.2