devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
To: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Subject: [RFC PATCH 0/4] i.MX6 PU power domain support
Date: Tue, 11 Feb 2014 14:27:07 +0100	[thread overview]
Message-ID: <1392125231-28387-1-git-send-email-p.zabel@pengutronix.de> (raw)

The i.MX6Q can gate off the CPU and PU (GPU/VPU) power domains using the
Power Gating Controller (PGC) in the GPC register space. The CPU power
domain is already handled by wait state code, but the PU power domain can
be controlled using the generic power domain framework and power off the PU
supply regulator if all devices in the power domain are (runtime) suspended.

This patchset adds a GPC platform device initialized at subsys_initcall time
(after anatop regulators) that binds to the gpc device tree node and sets up
the PU power domain:

	gpc: gpc@020dc000 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "fsl,imx6q-gpc";
		reg = <0x020dc000 0x4000>;
		interrupts = <0 89 0x04 0 90 0x04>;
		pu-supply = <&reg_pu>;

		pd_pu: power-domain@020dc260 {
			compatible = "fsl,power-domain";
			reg = <0x020dc260 0x10>;
		};
	};

It registers a platform bus notifier so that it can add GPU and VPU devices
to the power domain when they are bound. If finds devices to be added to the
power domain by scanning the device tree for nodes that contain a
	power-domain = <&pd_pu>;
property.

For i.MX6QDL there is only one power domain, but on i.MX6SL I suspect the
DISP power domain could be handled using the same mechanism.

regards
Philipp

Philipp Zabel (4):
  ARM: imx6: gpc: Add PU power domain for GPU/VPU
  ARM: imx6: gpc: Add pm clock support to PU power domain
  ARM: dts: imx6qdl: Allow disabling the PU regulator, add a enable ramp
    delay
  ARM: dts: imx6qdl: Add PU power-domain information to gpc node

 arch/arm/boot/dts/imx6qdl.dtsi |  11 +-
 arch/arm/mach-imx/Kconfig      |   2 +
 arch/arm/mach-imx/gpc.c        | 243 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 255 insertions(+), 1 deletion(-)

-- 
1.8.5.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

             reply	other threads:[~2014-02-11 13:27 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-11 13:27 Philipp Zabel [this message]
     [not found] ` <1392125231-28387-1-git-send-email-p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2014-02-11 13:27   ` [RFC PATCH 1/4] ARM: imx6: gpc: Add PU power domain for GPU/VPU Philipp Zabel
     [not found]     ` <1392125231-28387-2-git-send-email-p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2014-02-12  7:17       ` Shawn Guo
     [not found]         ` <20140212071731.GH31484-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2014-02-12 10:13           ` Philipp Zabel
2014-02-11 13:27   ` [RFC PATCH 2/4] ARM: imx6: gpc: Add pm clock support to PU power domain Philipp Zabel
2014-02-11 13:27   ` [RFC PATCH 3/4] ARM: dts: imx6qdl: Allow disabling the PU regulator, add a enable ramp delay Philipp Zabel
2014-02-11 13:27   ` [RFC PATCH 4/4] ARM: dts: imx6qdl: Add PU power-domain information to gpc node Philipp Zabel
     [not found]     ` <1392125231-28387-5-git-send-email-p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2014-02-12  7:25       ` Shawn Guo
     [not found]         ` <20140212072510.GI31484-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2014-02-12 10:20           ` Philipp Zabel
     [not found]             ` <1392200455.5536.36.camel-/rZezPiN1rtR6QfukMTsflXZhhPuCNm+@public.gmane.org>
2014-02-12 11:15               ` Shawn Guo
2014-02-12  7:26   ` [RFC PATCH 0/4] i.MX6 PU power domain support Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1392125231-28387-1-git-send-email-p.zabel@pengutronix.de \
    --to=p.zabel-bicnvbalz9megne8c9+irq@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).