From mboxrd@z Thu Jan 1 00:00:00 1970 From: Philipp Zabel Subject: [PATCH v2 5/7] ARM: dts: imx6qdl: Allow disabling the PU regulator, add a enable ramp delay Date: Thu, 13 Feb 2014 15:39:08 +0100 Message-ID: <1392302350-11729-6-git-send-email-p.zabel@pengutronix.de> References: <1392302350-11729-1-git-send-email-p.zabel@pengutronix.de> Return-path: In-Reply-To: <1392302350-11729-1-git-send-email-p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Shawn Guo Cc: Rob Herring , Mark Rutland , kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Philipp Zabel List-Id: devicetree@vger.kernel.org The PU regulator is enabled during boot, but not necessarily always-on. It can be disabled by the generic pm domain framework when the PU power domain is shut down. The ramp delay of 150 us might be a bit conservative, the value is taken from the Freescale kernel. Signed-off-by: Philipp Zabel --- arch/arm/boot/dts/imx6qdl.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index fb28b2e..253d82c 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -515,7 +515,8 @@ regulator-name = "vddpu"; regulator-min-microvolt = <725000>; regulator-max-microvolt = <1450000>; - regulator-always-on; + regulator-enable-ramp-delay = <150>; + regulator-boot-on; anatop-reg-offset = <0x140>; anatop-vol-bit-shift = <9>; anatop-vol-bit-width = <5>; -- 1.8.5.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html