[PATCH net-next v5 02/10] net: phy: update port type for MoCA PHYs

[Florian Fainelli <f.fainelli@gmail.com>]

MoCA PHYs are using coaxial (BNC-like) connectors, update the
transceiver port type when replying to ethtool.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
Changes in v5:
- respin due to the CONFIG_OF dependency fix

Changes in v4:
- respin due to the Kconfig dependency fix

Changes in v1, v2 and v3:
- rebased against latest net-next/master

 drivers/net/phy/phy.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index fc918b6..643b5d6 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -305,7 +305,10 @@ int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd)
 
 	ethtool_cmd_speed_set(cmd, phydev->speed);
 	cmd->duplex = phydev->duplex;
-	cmd->port = PORT_MII;
+	if (phydev->interface == PHY_INTERFACE_MODE_MOCA)
+		cmd->port = PORT_BNC;
+	else
+		cmd->port = PORT_MII;
 	cmd->phy_address = phydev->addr;
 	cmd->transceiver = phy_is_internal(phydev) ?
 		XCVR_INTERNAL : XCVR_EXTERNAL;
-- 
1.8.3.2