From: Marek Belisko <marek@goldelico.com>
To: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
rob@landley.net, dbaryshkov@gmail.com, dwmw2@infradead.org,
grant.likely@linaro.org
Cc: devicetree@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org, hns@goldelico.com,
Marek Belisko <marek@goldelico.com>
Subject: [PATCH] power: twl4030_madc_battery: Add device tree support.
Date: Fri, 14 Feb 2014 14:24:19 +0100 [thread overview]
Message-ID: <1392384259-14311-1-git-send-email-marek@goldelico.com> (raw)
Signed-off-by: Marek Belisko <marek@goldelico.com>
---
.../bindings/power_supply/twl4030_madc_battery.txt | 15 +++
drivers/power/twl4030_madc_battery.c | 109 +++++++++++++++++++++
2 files changed, 124 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power_supply/twl4030_madc_battery.txt
diff --git a/Documentation/devicetree/bindings/power_supply/twl4030_madc_battery.txt b/Documentation/devicetree/bindings/power_supply/twl4030_madc_battery.txt
new file mode 100644
index 0000000..bebc876
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/twl4030_madc_battery.txt
@@ -0,0 +1,15 @@
+twl4030_madc_battery
+
+Required properties:
+ - compatible : "ti,twl4030-madc-battery"
+ - capacity : battery capacity in uAh
+ - charging-calibration-data : list of voltage(mV):level(%) values for charging calibration (see example)
+ - discharging-calibration-data : list of voltage(mV):level(%) values for discharging calibration (see example)
+
+Example:
+ madc-battery {
+ compatible = "ti,twl4030-madc-battery";
+ capacity = <1200000>;
+ charging-calibration-data = <4200 100 4100 75 4000 55 3900 25 3800 5 3700 2 3600 1 3300 0>;
+ discharging-calibration-data = <4200 100 4100 95 4000 70 3800 50 3700 10 3600 5 3300 0>;
+ };
diff --git a/drivers/power/twl4030_madc_battery.c b/drivers/power/twl4030_madc_battery.c
index 7ef445a..2843382 100644
--- a/drivers/power/twl4030_madc_battery.c
+++ b/drivers/power/twl4030_madc_battery.c
@@ -19,6 +19,7 @@
#include <linux/sort.h>
#include <linux/i2c/twl4030-madc.h>
#include <linux/power/twl4030_madc_battery.h>
+#include <linux/of.h>
struct twl4030_madc_battery {
struct power_supply psy;
@@ -188,6 +189,110 @@ static int twl4030_cmp(const void *a, const void *b)
((struct twl4030_madc_bat_calibration *)a)->voltage;
}
+#ifdef CONFIG_OF
+static struct twl4030_madc_bat_platform_data *
+ twl4030_madc_dt_probe(struct platform_device *pdev)
+{
+ struct twl4030_madc_bat_platform_data *pdata;
+ struct device_node *np = pdev->dev.of_node;
+ struct property *prop;
+ int ret;
+ int sz, i, j = 0;
+
+ pdata = devm_kzalloc(&pdev->dev,
+ sizeof(struct twl4030_madc_bat_platform_data),
+ GFP_KERNEL);
+ if (!pdata)
+ return ERR_PTR(-ENOMEM);
+
+ ret = of_property_read_u32(np, "capacity", &pdata->capacity);
+ if (ret != 0)
+ return ERR_PTR(-EINVAL);
+
+ /* parse and prepare charging data */
+ prop = of_find_property(np, "charging-calibration-data", &sz);
+ if (!prop)
+ return ERR_PTR(-EINVAL);
+
+ if (sz % 2) {
+ dev_warn(&pdev->dev, "Count of charging-calibration-data must be even!\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ sz /= sizeof(u32);
+
+ {
+ u32 data[sz];
+
+ ret = of_property_read_u32_array(np,
+ "charging-calibration-data", &data[0], sz);
+ if (ret)
+ return ERR_PTR(ret);
+
+ pdata->charging = devm_kzalloc(&pdev->dev,
+ sizeof(struct twl4030_madc_bat_calibration) * (sz / 2),
+ GFP_KERNEL);
+
+ for (i = 0; i < sz; i += 2) {
+ pdata->charging[j].voltage = data[i];
+ pdata->charging[j].level = data[i+1];
+ j++;
+ }
+
+ pdata->charging_size = sz / 2;
+ }
+
+ /* parse and prepare discharging data */
+ prop = of_find_property(np, "discharging-calibration-data", &sz);
+ if (!prop)
+ return ERR_PTR(-EINVAL);
+
+ if (sz % 2) {
+ dev_warn(&pdev->dev, "Count of discharging-calibration-data must be even!\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ sz /= sizeof(u32);
+
+ {
+ u32 data[sz];
+
+ ret = of_property_read_u32_array(np,
+ "discharging-calibration-data", &data[0], sz);
+ if (ret)
+ return ERR_PTR(ret);
+
+ j = 0;
+
+ pdata->discharging = devm_kzalloc(&pdev->dev,
+ sizeof(struct twl4030_madc_bat_calibration) * (sz / 2),
+ GFP_KERNEL);
+
+ for (i = 0; i < sz; i += 2) {
+ pdata->discharging[j].voltage = data[i];
+ pdata->discharging[j].level = data[i+1];
+ j++;
+ }
+
+ pdata->discharging_size = sz / 2;
+ }
+
+ return pdata;
+}
+
+static const struct of_device_id of_twl4030_madc_match[] = {
+ { .compatible = "ti,twl4030-madc-battery", },
+ {},
+};
+
+#else
+static struct twl4030_madc_bat_platform_data *
+ twl4030_madc_dt_probe(struct platform_device *pdev)
+{
+ return ERR_PTR(-ENODEV);
+}
+#endif
+
static int twl4030_madc_battery_probe(struct platform_device *pdev)
{
struct twl4030_madc_battery *twl4030_madc_bat;
@@ -197,6 +302,9 @@ static int twl4030_madc_battery_probe(struct platform_device *pdev)
if (!twl4030_madc_bat)
return -ENOMEM;
+ if (!pdata)
+ pdata = twl4030_madc_dt_probe(pdev);
+
twl4030_madc_bat->psy.name = "twl4030_battery";
twl4030_madc_bat->psy.type = POWER_SUPPLY_TYPE_BATTERY;
twl4030_madc_bat->psy.properties = twl4030_madc_bat_props;
@@ -234,6 +342,7 @@ static int twl4030_madc_battery_remove(struct platform_device *pdev)
static struct platform_driver twl4030_madc_battery_driver = {
.driver = {
.name = "twl4030_madc_battery",
+ .of_match_table = of_match_ptr(of_twl4030_madc_match),
},
.probe = twl4030_madc_battery_probe,
.remove = twl4030_madc_battery_remove,
--
1.8.3.2
next reply other threads:[~2014-02-14 13:24 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-14 13:24 Marek Belisko [this message]
2014-02-14 13:43 ` [PATCH] power: twl4030_madc_battery: Add device tree support Mark Rutland
2014-02-14 14:49 ` Belisko Marek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1392384259-14311-1-git-send-email-marek@goldelico.com \
--to=marek@goldelico.com \
--cc=dbaryshkov@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=galak@codeaurora.org \
--cc=grant.likely@linaro.org \
--cc=hns@goldelico.com \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=rob@landley.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).