From: Rahul Sharma <rahul.sharma@samsung.com>
To: linux-samsung-soc@vger.kernel.org
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
kgene.kim@samsung.com, tomasz.figa@gmail.com, joshi@samsung.com,
r.sh.open@gmail.com, Pankaj Dubey <pankaj.dubey@samsung.com>,
Rahul Sharma <rahul.sharma@samsung.com>
Subject: [PATCH v3 1/3] ARM: EXYNOS: initial board support for exynos5260 SoC
Date: Fri, 14 Feb 2014 19:07:10 +0530 [thread overview]
Message-ID: <1392385032-22015-2-git-send-email-rahul.sharma@samsung.com> (raw)
In-Reply-To: <1392385032-22015-1-git-send-email-rahul.sharma@samsung.com>
From: Pankaj Dubey <pankaj.dubey@samsung.com>
This patch add basic arch side support for exynos5260 SoC.
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
---
arch/arm/mach-exynos/Kconfig | 9 +++++++++
arch/arm/mach-exynos/common.c | 11 +++++++++++
arch/arm/mach-exynos/include/mach/map.h | 1 +
arch/arm/mach-exynos/mach-exynos5-dt.c | 1 +
arch/arm/plat-samsung/include/plat/cpu.h | 8 ++++++++
5 files changed, 30 insertions(+)
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 4c414af..5c96248 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -91,6 +91,15 @@ config SOC_EXYNOS5250
help
Enable EXYNOS5250 SoC support
+config SOC_EXYNOS5260
+ bool "SAMSUNG EXYNOS5260"
+ default y
+ depends on ARCH_EXYNOS5
+ select AUTO_ZRELADDR
+ select SAMSUNG_DMADEV
+ help
+ Enable EXYNOS5260 SoC support
+
config SOC_EXYNOS5420
bool "SAMSUNG EXYNOS5420"
default y
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index bab52ca..02b142d 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -176,6 +176,15 @@ static struct map_desc exynos5250_iodesc[] __initdata = {
},
};
+static struct map_desc exynos5260_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_SYSRAM_NS,
+ .pfn = __phys_to_pfn(EXYNOS5260_PA_SYSRAM_NS),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
static struct map_desc exynos5_iodesc[] __initdata = {
{
.virtual = (unsigned long)S3C_VA_SYS,
@@ -326,6 +335,8 @@ static void __init exynos_map_io(void)
iotable_init(exynos4x12_iodesc, ARRAY_SIZE(exynos4x12_iodesc));
if (soc_is_exynos5250())
iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc));
+ if (soc_is_exynos5260())
+ iotable_init(exynos5260_iodesc, ARRAY_SIZE(exynos5260_iodesc));
}
struct bus_type exynos_subsys = {
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 7b046b5..bd6fa02 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -29,6 +29,7 @@
#define EXYNOS4210_PA_SYSRAM_NS 0x0203F000
#define EXYNOS4x12_PA_SYSRAM_NS 0x0204F000
#define EXYNOS5250_PA_SYSRAM_NS 0x0204F000
+#define EXYNOS5260_PA_SYSRAM_NS 0x02073000
#define EXYNOS_PA_CHIPID 0x10000000
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
index 65a4646..18aee57 100644
--- a/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -50,6 +50,7 @@ static void __init exynos5_dt_machine_init(void)
static char const *exynos5_dt_compat[] __initdata = {
"samsung,exynos5250",
+ "samsung,exynos5260",
"samsung,exynos5420",
"samsung,exynos5440",
NULL
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 335beb3..60687aa 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -46,6 +46,7 @@ extern unsigned long samsung_cpu_id;
#define EXYNOS4_CPU_MASK 0xFFFE0000
#define EXYNOS5250_SOC_ID 0x43520000
+#define EXYNOS5260_SOC_ID 0xE5260000
#define EXYNOS5420_SOC_ID 0xE5420000
#define EXYNOS5440_SOC_ID 0xE5440000
#define EXYNOS5_SOC_MASK 0xFFFFF000
@@ -68,6 +69,7 @@ IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
+IS_SAMSUNG_CPU(exynos5260, EXYNOS5260_SOC_ID, EXYNOS5_SOC_MASK)
IS_SAMSUNG_CPU(exynos5420, EXYNOS5420_SOC_ID, EXYNOS5_SOC_MASK)
IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
@@ -148,6 +150,12 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
# define soc_is_exynos5250() 0
#endif
+#if defined(CONFIG_SOC_EXYNOS5260)
+# define soc_is_exynos5260() is_samsung_exynos5260()
+#else
+# define soc_is_exynos5260() 0
+#endif
+
#if defined(CONFIG_SOC_EXYNOS5420)
# define soc_is_exynos5420() is_samsung_exynos5420()
#else
--
1.7.9.5
next prev parent reply other threads:[~2014-02-14 13:37 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-14 13:37 [PATCH v3 0/3] exynos: arch: add support for exynos5260 SoC Rahul Sharma
2014-02-14 13:37 ` Rahul Sharma [this message]
2014-02-14 18:58 ` [PATCH v3 1/3] ARM: EXYNOS: initial board " Tomasz Figa
2014-02-17 3:10 ` Sachin Kamat
2014-02-14 13:37 ` [PATCH v3 2/3] ARM: dts: add dts files " Rahul Sharma
2014-02-15 1:36 ` Tomasz Figa
2014-02-14 13:37 ` [PATCH v3 3/3] ARM: dts: add dts files for xyref5260 board Rahul Sharma
2014-02-14 18:57 ` Tomasz Figa
2014-02-15 9:24 ` Rahul Sharma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1392385032-22015-2-git-send-email-rahul.sharma@samsung.com \
--to=rahul.sharma@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=joshi@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=pankaj.dubey@samsung.com \
--cc=r.sh.open@gmail.com \
--cc=tomasz.figa@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).