* [PATCHv2 1/5] wl1251: split wl251 platform data to a separate structure
2014-02-14 23:05 ` [RESEND] [PATCHv2 0/5] wl1251 device tree support Sebastian Reichel
@ 2014-02-14 23:05 ` Sebastian Reichel
2014-02-14 23:05 ` [PATCHv2 2/5] wl1251: move power GPIO handling into the driver Sebastian Reichel
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Sebastian Reichel @ 2014-02-14 23:05 UTC (permalink / raw)
To: Sebastian Reichel, Luciano Coelho, Tony Lindgren,
John W. Linville
Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Rob Landley,
Kumar Gala, devicetree, linux-kernel, linux-wireless, linux-omap,
netdev, Luciano Coelho
From: Luciano Coelho <coelho@ti.com>
Move the wl1251 part of the wl12xx platform data structure into a new
structure specifically for wl1251. Change the platform data built-in
block and board files accordingly.
Signed-off-by: Luciano Coelho <coelho@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Reviewed-by: Sebastian Reichel <sre@debian.org>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
---
arch/arm/mach-omap2/board-omap3pandora.c | 4 +--
arch/arm/mach-omap2/board-rx51-peripherals.c | 2 +-
drivers/net/wireless/ti/wilink_platform_data.c | 37 +++++++++++++++++++++-----
drivers/net/wireless/ti/wl1251/sdio.c | 12 ++++-----
drivers/net/wireless/ti/wl1251/spi.c | 2 +-
include/linux/wl12xx.h | 22 ++++++++++++++-
6 files changed, 62 insertions(+), 17 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index de1bc6b..24f3c1b 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -536,7 +536,7 @@ static struct spi_board_info omap3pandora_spi_board_info[] __initdata = {
static void __init pandora_wl1251_init(void)
{
- struct wl12xx_platform_data pandora_wl1251_pdata;
+ struct wl1251_platform_data pandora_wl1251_pdata;
int ret;
memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata));
@@ -550,7 +550,7 @@ static void __init pandora_wl1251_init(void)
goto fail_irq;
pandora_wl1251_pdata.use_eeprom = true;
- ret = wl12xx_set_platform_data(&pandora_wl1251_pdata);
+ ret = wl1251_set_platform_data(&pandora_wl1251_pdata);
if (ret < 0)
goto fail_irq;
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 8760bbe..e05e740 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -84,7 +84,7 @@ enum {
RX51_SPI_MIPID, /* LCD panel */
};
-static struct wl12xx_platform_data wl1251_pdata;
+static struct wl1251_platform_data wl1251_pdata;
static struct tsc2005_platform_data tsc2005_pdata;
#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
diff --git a/drivers/net/wireless/ti/wilink_platform_data.c b/drivers/net/wireless/ti/wilink_platform_data.c
index 998e958..a92bd3e 100644
--- a/drivers/net/wireless/ti/wilink_platform_data.c
+++ b/drivers/net/wireless/ti/wilink_platform_data.c
@@ -23,17 +23,17 @@
#include <linux/err.h>
#include <linux/wl12xx.h>
-static struct wl12xx_platform_data *platform_data;
+static struct wl12xx_platform_data *wl12xx_platform_data;
int __init wl12xx_set_platform_data(const struct wl12xx_platform_data *data)
{
- if (platform_data)
+ if (wl12xx_platform_data)
return -EBUSY;
if (!data)
return -EINVAL;
- platform_data = kmemdup(data, sizeof(*data), GFP_KERNEL);
- if (!platform_data)
+ wl12xx_platform_data = kmemdup(data, sizeof(*data), GFP_KERNEL);
+ if (!wl12xx_platform_data)
return -ENOMEM;
return 0;
@@ -41,9 +41,34 @@ int __init wl12xx_set_platform_data(const struct wl12xx_platform_data *data)
struct wl12xx_platform_data *wl12xx_get_platform_data(void)
{
- if (!platform_data)
+ if (!wl12xx_platform_data)
return ERR_PTR(-ENODEV);
- return platform_data;
+ return wl12xx_platform_data;
}
EXPORT_SYMBOL(wl12xx_get_platform_data);
+
+static struct wl1251_platform_data *wl1251_platform_data;
+
+int __init wl1251_set_platform_data(const struct wl1251_platform_data *data)
+{
+ if (wl1251_platform_data)
+ return -EBUSY;
+ if (!data)
+ return -EINVAL;
+
+ wl1251_platform_data = kmemdup(data, sizeof(*data), GFP_KERNEL);
+ if (!wl1251_platform_data)
+ return -ENOMEM;
+
+ return 0;
+}
+
+struct wl1251_platform_data *wl1251_get_platform_data(void)
+{
+ if (!wl1251_platform_data)
+ return ERR_PTR(-ENODEV);
+
+ return wl1251_platform_data;
+}
+EXPORT_SYMBOL(wl1251_get_platform_data);
diff --git a/drivers/net/wireless/ti/wl1251/sdio.c b/drivers/net/wireless/ti/wl1251/sdio.c
index e2b3d9c..b75a37a 100644
--- a/drivers/net/wireless/ti/wl1251/sdio.c
+++ b/drivers/net/wireless/ti/wl1251/sdio.c
@@ -227,7 +227,7 @@ static int wl1251_sdio_probe(struct sdio_func *func,
struct wl1251 *wl;
struct ieee80211_hw *hw;
struct wl1251_sdio *wl_sdio;
- const struct wl12xx_platform_data *wl12xx_board_data;
+ const struct wl1251_platform_data *wl1251_board_data;
hw = wl1251_alloc_hw();
if (IS_ERR(hw))
@@ -254,11 +254,11 @@ static int wl1251_sdio_probe(struct sdio_func *func,
wl->if_priv = wl_sdio;
wl->if_ops = &wl1251_sdio_ops;
- wl12xx_board_data = wl12xx_get_platform_data();
- if (!IS_ERR(wl12xx_board_data)) {
- wl->set_power = wl12xx_board_data->set_power;
- wl->irq = wl12xx_board_data->irq;
- wl->use_eeprom = wl12xx_board_data->use_eeprom;
+ wl1251_board_data = wl1251_get_platform_data();
+ if (!IS_ERR(wl1251_board_data)) {
+ wl->set_power = wl1251_board_data->set_power;
+ wl->irq = wl1251_board_data->irq;
+ wl->use_eeprom = wl1251_board_data->use_eeprom;
}
if (wl->irq) {
diff --git a/drivers/net/wireless/ti/wl1251/spi.c b/drivers/net/wireless/ti/wl1251/spi.c
index 1342f81..62403a1 100644
--- a/drivers/net/wireless/ti/wl1251/spi.c
+++ b/drivers/net/wireless/ti/wl1251/spi.c
@@ -238,7 +238,7 @@ static const struct wl1251_if_operations wl1251_spi_ops = {
static int wl1251_spi_probe(struct spi_device *spi)
{
- struct wl12xx_platform_data *pdata;
+ struct wl1251_platform_data *pdata;
struct ieee80211_hw *hw;
struct wl1251 *wl;
int ret;
diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h
index a54fe82..b516b4f 100644
--- a/include/linux/wl12xx.h
+++ b/include/linux/wl12xx.h
@@ -48,11 +48,15 @@ enum {
WL12XX_TCXOCLOCK_33_6 = 7, /* 33.6 MHz */
};
-struct wl12xx_platform_data {
+struct wl1251_platform_data {
void (*set_power)(bool enable);
/* SDIO only: IRQ number if WLAN_IRQ line is used, 0 for SDIO IRQs */
int irq;
bool use_eeprom;
+};
+
+struct wl12xx_platform_data {
+ int irq;
int board_ref_clock;
int board_tcxo_clock;
unsigned long platform_quirks;
@@ -68,6 +72,10 @@ int wl12xx_set_platform_data(const struct wl12xx_platform_data *data);
struct wl12xx_platform_data *wl12xx_get_platform_data(void);
+int wl1251_set_platform_data(const struct wl1251_platform_data *data);
+
+struct wl1251_platform_data *wl1251_get_platform_data(void);
+
#else
static inline
@@ -82,6 +90,18 @@ struct wl12xx_platform_data *wl12xx_get_platform_data(void)
return ERR_PTR(-ENODATA);
}
+static inline
+int wl1251_set_platform_data(const struct wl1251_platform_data *data)
+{
+ return -ENOSYS;
+}
+
+static inline
+struct wl1251_platform_data *wl1251_get_platform_data(void)
+{
+ return ERR_PTR(-ENODATA);
+}
+
#endif
#endif
--
1.8.5.3
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCHv2 2/5] wl1251: move power GPIO handling into the driver
2014-02-14 23:05 ` [RESEND] [PATCHv2 0/5] wl1251 device tree support Sebastian Reichel
2014-02-14 23:05 ` [PATCHv2 1/5] wl1251: split wl251 platform data to a separate structure Sebastian Reichel
@ 2014-02-14 23:05 ` Sebastian Reichel
2014-02-14 23:05 ` [PATCHv2 3/5] wl1251: spi: add vio regulator support Sebastian Reichel
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Sebastian Reichel @ 2014-02-14 23:05 UTC (permalink / raw)
To: Sebastian Reichel, Luciano Coelho, Tony Lindgren,
John W. Linville
Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Rob Landley,
Kumar Gala, devicetree, linux-kernel, linux-wireless, linux-omap,
netdev, Sebastian Reichel
Move the power GPIO handling from the board code into
the driver. This is a dependency for device tree support.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/board-omap3pandora.c | 2 ++
arch/arm/mach-omap2/board-rx51-peripherals.c | 11 ++--------
drivers/net/wireless/ti/wl1251/sdio.c | 21 +++++++++++++-----
drivers/net/wireless/ti/wl1251/spi.c | 33 ++++++++++++++++++----------
drivers/net/wireless/ti/wl1251/wl1251.h | 2 +-
include/linux/wl12xx.h | 2 +-
6 files changed, 43 insertions(+), 28 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 24f3c1b..cf18340 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -541,6 +541,8 @@ static void __init pandora_wl1251_init(void)
memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata));
+ pandora_wl1251_pdata.power_gpio = -1;
+
ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq");
if (ret < 0)
goto fail;
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index e05e740..ddfc8df 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -1173,13 +1173,7 @@ static inline void board_smc91x_init(void)
#endif
-static void rx51_wl1251_set_power(bool enable)
-{
- gpio_set_value(RX51_WL1251_POWER_GPIO, enable);
-}
-
static struct gpio rx51_wl1251_gpios[] __initdata = {
- { RX51_WL1251_POWER_GPIO, GPIOF_OUT_INIT_LOW, "wl1251 power" },
{ RX51_WL1251_IRQ_GPIO, GPIOF_IN, "wl1251 irq" },
};
@@ -1196,17 +1190,16 @@ static void __init rx51_init_wl1251(void)
if (irq < 0)
goto err_irq;
- wl1251_pdata.set_power = rx51_wl1251_set_power;
+ wl1251_pdata.power_gpio = RX51_WL1251_POWER_GPIO;
rx51_peripherals_spi_board_info[RX51_SPI_WL1251].irq = irq;
return;
err_irq:
gpio_free(RX51_WL1251_IRQ_GPIO);
- gpio_free(RX51_WL1251_POWER_GPIO);
error:
printk(KERN_ERR "wl1251 board initialisation failed\n");
- wl1251_pdata.set_power = NULL;
+ wl1251_pdata.power_gpio = -1;
/*
* Now rx51_peripherals_spi_board_info[1].irq is zero and
diff --git a/drivers/net/wireless/ti/wl1251/sdio.c b/drivers/net/wireless/ti/wl1251/sdio.c
index b75a37a..b661f89 100644
--- a/drivers/net/wireless/ti/wl1251/sdio.c
+++ b/drivers/net/wireless/ti/wl1251/sdio.c
@@ -28,6 +28,7 @@
#include <linux/wl12xx.h>
#include <linux/irq.h>
#include <linux/pm_runtime.h>
+#include <linux/gpio.h>
#include "wl1251.h"
@@ -182,8 +183,9 @@ static int wl1251_sdio_set_power(struct wl1251 *wl, bool enable)
* callback in case it wants to do any additional setup,
* for example enabling clock buffer for the module.
*/
- if (wl->set_power)
- wl->set_power(true);
+ if (gpio_is_valid(wl->power_gpio))
+ gpio_set_value(wl->power_gpio, true);
+
ret = pm_runtime_get_sync(&func->dev);
if (ret < 0) {
@@ -203,8 +205,8 @@ static int wl1251_sdio_set_power(struct wl1251 *wl, bool enable)
if (ret < 0)
goto out;
- if (wl->set_power)
- wl->set_power(false);
+ if (gpio_is_valid(wl->power_gpio))
+ gpio_set_value(wl->power_gpio, false);
}
out:
@@ -256,11 +258,20 @@ static int wl1251_sdio_probe(struct sdio_func *func,
wl1251_board_data = wl1251_get_platform_data();
if (!IS_ERR(wl1251_board_data)) {
- wl->set_power = wl1251_board_data->set_power;
+ wl->power_gpio = wl1251_board_data->power_gpio;
wl->irq = wl1251_board_data->irq;
wl->use_eeprom = wl1251_board_data->use_eeprom;
}
+ if (gpio_is_valid(wl->power_gpio)) {
+ ret = devm_gpio_request(&func->dev, wl->power_gpio,
+ "wl1251 power");
+ if (ret) {
+ wl1251_error("Failed to request gpio: %d\n", ret);
+ goto disable;
+ }
+ }
+
if (wl->irq) {
irq_set_status_flags(wl->irq, IRQ_NOAUTOEN);
ret = request_irq(wl->irq, wl1251_line_irq, 0, "wl1251", wl);
diff --git a/drivers/net/wireless/ti/wl1251/spi.c b/drivers/net/wireless/ti/wl1251/spi.c
index 62403a1..6abcbc3 100644
--- a/drivers/net/wireless/ti/wl1251/spi.c
+++ b/drivers/net/wireless/ti/wl1251/spi.c
@@ -26,6 +26,7 @@
#include <linux/crc7.h>
#include <linux/spi/spi.h>
#include <linux/wl12xx.h>
+#include <linux/gpio.h>
#include "wl1251.h"
#include "reg.h"
@@ -221,8 +222,8 @@ static void wl1251_spi_disable_irq(struct wl1251 *wl)
static int wl1251_spi_set_power(struct wl1251 *wl, bool enable)
{
- if (wl->set_power)
- wl->set_power(enable);
+ if (gpio_is_valid(wl->power_gpio))
+ gpio_set_value(wl->power_gpio, enable);
return 0;
}
@@ -271,22 +272,33 @@ static int wl1251_spi_probe(struct spi_device *spi)
goto out_free;
}
- wl->set_power = pdata->set_power;
- if (!wl->set_power) {
- wl1251_error("set power function missing in platform data");
- return -ENODEV;
+ wl->power_gpio = pdata->power_gpio;
+
+ if (gpio_is_valid(wl->power_gpio)) {
+ ret = devm_gpio_request_one(&spi->dev, wl->power_gpio,
+ GPIOF_OUT_INIT_LOW, "wl1251 power");
+ if (ret) {
+ wl1251_error("Failed to request gpio: %d\n", ret);
+ goto out_free;
+ }
+ } else {
+ wl1251_error("set power gpio missing in platform data");
+ ret = -ENODEV;
+ goto out_free;
}
wl->irq = spi->irq;
if (wl->irq < 0) {
wl1251_error("irq missing in platform data");
- return -ENODEV;
+ ret = -ENODEV;
+ goto out_free;
}
wl->use_eeprom = pdata->use_eeprom;
irq_set_status_flags(wl->irq, IRQ_NOAUTOEN);
- ret = request_irq(wl->irq, wl1251_irq, 0, DRIVER_NAME, wl);
+ ret = devm_request_irq(&spi->dev, wl->irq, wl1251_irq, 0,
+ DRIVER_NAME, wl);
if (ret < 0) {
wl1251_error("request_irq() failed: %d", ret);
goto out_free;
@@ -296,13 +308,10 @@ static int wl1251_spi_probe(struct spi_device *spi)
ret = wl1251_init_ieee80211(wl);
if (ret)
- goto out_irq;
+ goto out_free;
return 0;
- out_irq:
- free_irq(wl->irq, wl);
-
out_free:
ieee80211_free_hw(hw);
diff --git a/drivers/net/wireless/ti/wl1251/wl1251.h b/drivers/net/wireless/ti/wl1251/wl1251.h
index 235617a..389fe25 100644
--- a/drivers/net/wireless/ti/wl1251/wl1251.h
+++ b/drivers/net/wireless/ti/wl1251/wl1251.h
@@ -276,7 +276,7 @@ struct wl1251 {
void *if_priv;
const struct wl1251_if_operations *if_ops;
- void (*set_power)(bool enable);
+ int power_gpio;
int irq;
bool use_eeprom;
diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h
index b516b4f..a9c723b 100644
--- a/include/linux/wl12xx.h
+++ b/include/linux/wl12xx.h
@@ -49,7 +49,7 @@ enum {
};
struct wl1251_platform_data {
- void (*set_power)(bool enable);
+ int power_gpio;
/* SDIO only: IRQ number if WLAN_IRQ line is used, 0 for SDIO IRQs */
int irq;
bool use_eeprom;
--
1.8.5.3
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCHv2 3/5] wl1251: spi: add vio regulator support
2014-02-14 23:05 ` [RESEND] [PATCHv2 0/5] wl1251 device tree support Sebastian Reichel
2014-02-14 23:05 ` [PATCHv2 1/5] wl1251: split wl251 platform data to a separate structure Sebastian Reichel
2014-02-14 23:05 ` [PATCHv2 2/5] wl1251: move power GPIO handling into the driver Sebastian Reichel
@ 2014-02-14 23:05 ` Sebastian Reichel
2014-02-14 23:05 ` [PATCHv2 4/5] wl1251: spi: add device tree support Sebastian Reichel
2014-02-14 23:05 ` [PATCHv2 5/5] Documentation: dt: wireless: Add wl1251 Sebastian Reichel
4 siblings, 0 replies; 6+ messages in thread
From: Sebastian Reichel @ 2014-02-14 23:05 UTC (permalink / raw)
To: Sebastian Reichel, Luciano Coelho, Tony Lindgren,
John W. Linville
Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Rob Landley,
Kumar Gala, devicetree, linux-kernel, linux-wireless, linux-omap,
netdev, Sebastian Reichel
This patch adds support for requesting the regulator powering
the vio pin.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
---
drivers/net/wireless/ti/wl1251/spi.c | 19 +++++++++++++++++--
drivers/net/wireless/ti/wl1251/wl1251.h | 2 ++
2 files changed, 19 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ti/wl1251/spi.c b/drivers/net/wireless/ti/wl1251/spi.c
index 6abcbc3..0a8aacc 100644
--- a/drivers/net/wireless/ti/wl1251/spi.c
+++ b/drivers/net/wireless/ti/wl1251/spi.c
@@ -27,6 +27,7 @@
#include <linux/spi/spi.h>
#include <linux/wl12xx.h>
#include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
#include "wl1251.h"
#include "reg.h"
@@ -306,13 +307,26 @@ static int wl1251_spi_probe(struct spi_device *spi)
irq_set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING);
- ret = wl1251_init_ieee80211(wl);
+ wl->vio = devm_regulator_get(&spi->dev, "vio");
+ if (IS_ERR(wl->vio)) {
+ ret = PTR_ERR(wl->vio);
+ wl1251_error("vio regulator missing: %d", ret);
+ goto out_free;
+ }
+
+ ret = regulator_enable(wl->vio);
if (ret)
goto out_free;
+ ret = wl1251_init_ieee80211(wl);
+ if (ret)
+ goto disable_regulator;
+
return 0;
- out_free:
+disable_regulator:
+ regulator_disable(wl->vio);
+out_free:
ieee80211_free_hw(hw);
return ret;
@@ -324,6 +338,7 @@ static int wl1251_spi_remove(struct spi_device *spi)
free_irq(wl->irq, wl);
wl1251_free_hw(wl);
+ regulator_disable(wl->vio);
return 0;
}
diff --git a/drivers/net/wireless/ti/wl1251/wl1251.h b/drivers/net/wireless/ti/wl1251/wl1251.h
index 389fe25..16dae52 100644
--- a/drivers/net/wireless/ti/wl1251/wl1251.h
+++ b/drivers/net/wireless/ti/wl1251/wl1251.h
@@ -280,6 +280,8 @@ struct wl1251 {
int irq;
bool use_eeprom;
+ struct regulator *vio;
+
spinlock_t wl_lock;
enum wl1251_state state;
--
1.8.5.3
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCHv2 4/5] wl1251: spi: add device tree support
2014-02-14 23:05 ` [RESEND] [PATCHv2 0/5] wl1251 device tree support Sebastian Reichel
` (2 preceding siblings ...)
2014-02-14 23:05 ` [PATCHv2 3/5] wl1251: spi: add vio regulator support Sebastian Reichel
@ 2014-02-14 23:05 ` Sebastian Reichel
2014-02-14 23:05 ` [PATCHv2 5/5] Documentation: dt: wireless: Add wl1251 Sebastian Reichel
4 siblings, 0 replies; 6+ messages in thread
From: Sebastian Reichel @ 2014-02-14 23:05 UTC (permalink / raw)
To: Sebastian Reichel, Luciano Coelho, Tony Lindgren,
John W. Linville
Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Rob Landley,
Kumar Gala, devicetree, linux-kernel, linux-wireless, linux-omap,
netdev, Sebastian Reichel
Add device tree support for the spi variant of wl1251.
Signed-off-by: Sebastian Reichel <sre@debian.org>
---
drivers/net/wireless/ti/wl1251/spi.c | 23 +++++++++++++++++------
1 file changed, 17 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/ti/wl1251/spi.c b/drivers/net/wireless/ti/wl1251/spi.c
index 0a8aacc..b06d36d 100644
--- a/drivers/net/wireless/ti/wl1251/spi.c
+++ b/drivers/net/wireless/ti/wl1251/spi.c
@@ -27,6 +27,8 @@
#include <linux/spi/spi.h>
#include <linux/wl12xx.h>
#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
#include <linux/regulator/consumer.h>
#include "wl1251.h"
@@ -240,13 +242,13 @@ static const struct wl1251_if_operations wl1251_spi_ops = {
static int wl1251_spi_probe(struct spi_device *spi)
{
- struct wl1251_platform_data *pdata;
+ struct wl1251_platform_data *pdata = dev_get_platdata(&spi->dev);
+ struct device_node *np = spi->dev.of_node;
struct ieee80211_hw *hw;
struct wl1251 *wl;
int ret;
- pdata = dev_get_platdata(&spi->dev);
- if (!pdata) {
+ if (!np && !pdata) {
wl1251_error("no platform data");
return -ENODEV;
}
@@ -273,7 +275,18 @@ static int wl1251_spi_probe(struct spi_device *spi)
goto out_free;
}
- wl->power_gpio = pdata->power_gpio;
+ if (np) {
+ wl->use_eeprom = of_property_read_bool(np, "ti,wl1251-has-eeprom");
+ wl->power_gpio = of_get_named_gpio(np, "ti,power-gpio", 0);
+ } else if (pdata) {
+ wl->power_gpio = pdata->power_gpio;
+ wl->use_eeprom = pdata->use_eeprom;
+ }
+
+ if (wl->power_gpio == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto out_free;
+ }
if (gpio_is_valid(wl->power_gpio)) {
ret = devm_gpio_request_one(&spi->dev, wl->power_gpio,
@@ -295,8 +308,6 @@ static int wl1251_spi_probe(struct spi_device *spi)
goto out_free;
}
- wl->use_eeprom = pdata->use_eeprom;
-
irq_set_status_flags(wl->irq, IRQ_NOAUTOEN);
ret = devm_request_irq(&spi->dev, wl->irq, wl1251_irq, 0,
DRIVER_NAME, wl);
--
1.8.5.3
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCHv2 5/5] Documentation: dt: wireless: Add wl1251
2014-02-14 23:05 ` [RESEND] [PATCHv2 0/5] wl1251 device tree support Sebastian Reichel
` (3 preceding siblings ...)
2014-02-14 23:05 ` [PATCHv2 4/5] wl1251: spi: add device tree support Sebastian Reichel
@ 2014-02-14 23:05 ` Sebastian Reichel
4 siblings, 0 replies; 6+ messages in thread
From: Sebastian Reichel @ 2014-02-14 23:05 UTC (permalink / raw)
To: Sebastian Reichel, Luciano Coelho, Tony Lindgren,
John W. Linville
Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Rob Landley,
Kumar Gala, devicetree, linux-kernel, linux-wireless, linux-omap,
netdev, Sebastian Reichel
Add device tree binding documentation for Texas Instrument's wl1251
wireless lan chip. For now only the SPI binding is documented.
Signed-off-by: Sebastian Reichel <sre@debian.org>
---
.../devicetree/bindings/net/wireless/ti,wl1251.txt | 39 ++++++++++++++++++++++
1 file changed, 39 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
new file mode 100644
index 0000000..189ae5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
@@ -0,0 +1,39 @@
+* Texas Instruments wl1251 wireless lan controller
+
+The wl1251 chip can be connected via SPI or via SDIO. This
+document describes the binding for the SPI connected chip.
+
+Required properties:
+- compatible : Should be "ti,wl1251"
+- reg : Chip select address of device
+- spi-max-frequency : Maximum SPI clocking speed of device in Hz
+- interrupts : Should contain interrupt line
+- interrupt-parent : Should be the phandle for the interrupt controller
+ that services interrupts for this device
+- vio-supply : phandle to regulator providing VIO
+- ti,power-gpio : GPIO connected to chip's PMEN pin
+
+Optional properties:
+- ti,wl1251-has-eeprom : boolean, the wl1251 has an eeprom connected, which
+ provides configuration data (calibration, MAC, ...)
+- Please consult Documentation/devicetree/bindings/spi/spi-bus.txt
+ for optional SPI connection related properties,
+
+Examples:
+
+&spi1 {
+ wl1251@0 {
+ compatible = "ti,wl1251";
+
+ reg = <0>;
+ spi-max-frequency = <48000000>;
+ spi-cpol;
+ spi-cpha;
+
+ interrupt-parent = <&gpio2>;
+ interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
+
+ vio-supply = <&vio>;
+ ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
+ };
+};
--
1.8.5.3
^ permalink raw reply related [flat|nested] 6+ messages in thread