* [PATCH v2 4/4] ARM: Kirkwood: Add support for many Synology NAS devices
[not found] ` <1392462094-25097-1-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
` (2 preceding siblings ...)
2014-02-15 11:01 ` [PATCH v2 3/4] DT: i2c: Trivial: Add sii,s35390a, fix ricoh vendor prefix Andrew Lunn
@ 2014-02-15 11:01 ` Andrew Lunn
3 siblings, 0 replies; 5+ messages in thread
From: Andrew Lunn @ 2014-02-15 11:01 UTC (permalink / raw)
To: Jason Cooper
Cc: linux ARM, devicetree-u79uwXL29TY76Z2rM5mHXA, Andrew Lunn,
Ben Peddell
Add device tree fragments and files to support many of the kirkwood
based Synology NAS devices. This is a translation of the board setup
file maintained by Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
Synology hardware is designed like lego. There are two RTC blocks,
three fan alarm blocks, four led blocks, etc. To build a product, a
common base is taken, and then blocks added. This is reflected in the
DT description. Each block has a .dtsi file. The common part is also
described in a .dtsi file. Each board dts file then just includes the
common and needed blocks.
Signed-off-by: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
Tested by Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
cc: Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
---
v2:
Fix gpio's which should be gpo.
Rebase onto v3-14-rc1
Update RTC nodes with vendor name.
Update SPI flash node with vendor name.
Add a description of the lego
Use ricoy, i.e. the stock ticker
---
arch/arm/boot/dts/Makefile | 15 ++++
arch/arm/boot/dts/kirkwood-ds109.dts | 33 ++++++++
arch/arm/boot/dts/kirkwood-ds110jv10.dts | 33 ++++++++
arch/arm/boot/dts/kirkwood-ds111.dts | 33 ++++++++
arch/arm/boot/dts/kirkwood-ds112.dts | 34 ++++++++
arch/arm/boot/dts/kirkwood-ds209.dts | 33 ++++++++
arch/arm/boot/dts/kirkwood-ds210.dts | 35 ++++++++
arch/arm/boot/dts/kirkwood-ds212.dts | 37 ++++++++
arch/arm/boot/dts/kirkwood-ds212j.dts | 34 ++++++++
arch/arm/boot/dts/kirkwood-ds409.dts | 34 ++++++++
arch/arm/boot/dts/kirkwood-ds409slim.dts | 32 +++++++
arch/arm/boot/dts/kirkwood-ds411.dts | 35 ++++++++
arch/arm/boot/dts/kirkwood-ds411j.dts | 34 ++++++++
arch/arm/boot/dts/kirkwood-ds411slim.dts | 34 ++++++++
arch/arm/boot/dts/kirkwood-rs212.dts | 34 ++++++++
arch/arm/boot/dts/kirkwood-rs409.dts | 33 ++++++++
arch/arm/boot/dts/kirkwood-rs411.dts | 34 ++++++++
arch/arm/boot/dts/synology/alarm-led-12.dtsi | 28 +++++++
arch/arm/boot/dts/synology/common.dtsi | 112 +++++++++++++++++++++++++
arch/arm/boot/dts/synology/ethernet-1.dtsi | 15 ++++
arch/arm/boot/dts/synology/fan-alarm-18.dtsi | 22 +++++
arch/arm/boot/dts/synology/fan-alarm-35-1.dtsi | 22 +++++
arch/arm/boot/dts/synology/fan-alarm-35-3.dtsi | 32 +++++++
arch/arm/boot/dts/synology/fan-gpios-15.dtsi | 34 ++++++++
arch/arm/boot/dts/synology/fan-gpios-32.dtsi | 34 ++++++++
arch/arm/boot/dts/synology/fan-speed-100.dtsi | 20 +++++
arch/arm/boot/dts/synology/fan-speed-120.dtsi | 20 +++++
arch/arm/boot/dts/synology/fan-speed-150.dtsi | 20 +++++
arch/arm/boot/dts/synology/hdd-leds-20.dtsi | 90 ++++++++++++++++++++
arch/arm/boot/dts/synology/hdd-leds-21-1.dtsi | 36 ++++++++
arch/arm/boot/dts/synology/hdd-leds-21-2.dtsi | 52 ++++++++++++
arch/arm/boot/dts/synology/hdd-leds-36.dtsi | 103 +++++++++++++++++++++++
arch/arm/boot/dts/synology/hdd-leds-38.dtsi | 52 ++++++++++++
arch/arm/boot/dts/synology/hdd-power-29.dtsi | 56 +++++++++++++
arch/arm/boot/dts/synology/hdd-power-30-1.dtsi | 40 +++++++++
arch/arm/boot/dts/synology/hdd-power-30-2.dtsi | 56 +++++++++++++
arch/arm/boot/dts/synology/hdd-power-30-4.dtsi | 89 ++++++++++++++++++++
arch/arm/boot/dts/synology/hdd-power-31.dtsi | 40 +++++++++
arch/arm/boot/dts/synology/hdd-power-34.dtsi | 73 ++++++++++++++++
arch/arm/boot/dts/synology/i2c-rtc-ricoh.dtsi | 18 ++++
arch/arm/boot/dts/synology/i2c-rtc-seiko.dtsi | 18 ++++
arch/arm/boot/dts/synology/pcie-2.dtsi | 19 +++++
42 files changed, 1658 insertions(+)
create mode 100644 arch/arm/boot/dts/kirkwood-ds109.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds110jv10.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds111.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds112.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds209.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds210.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds212.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds212j.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds409.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds409slim.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds411.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds411j.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds411slim.dts
create mode 100644 arch/arm/boot/dts/kirkwood-rs212.dts
create mode 100644 arch/arm/boot/dts/kirkwood-rs409.dts
create mode 100644 arch/arm/boot/dts/kirkwood-rs411.dts
create mode 100644 arch/arm/boot/dts/synology/alarm-led-12.dtsi
create mode 100644 arch/arm/boot/dts/synology/common.dtsi
create mode 100644 arch/arm/boot/dts/synology/ethernet-1.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-alarm-18.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-alarm-35-1.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-alarm-35-3.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-gpios-15.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-gpios-32.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-speed-100.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-speed-120.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-speed-150.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-leds-20.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-leds-21-1.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-leds-21-2.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-leds-36.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-leds-38.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-29.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-30-1.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-30-2.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-30-4.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-31.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-34.dtsi
create mode 100644 arch/arm/boot/dts/synology/i2c-rtc-ricoh.dtsi
create mode 100644 arch/arm/boot/dts/synology/i2c-rtc-seiko.dtsi
create mode 100644 arch/arm/boot/dts/synology/pcie-2.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b9d6a8b485e0..6cf3a54ef7f1 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -89,6 +89,18 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
kirkwood-dns325.dtb \
kirkwood-dockstar.dtb \
kirkwood-dreamplug.dtb \
+ kirkwood-ds109.dtb \
+ kirkwood-ds110jv10.dtb \
+ kirkwood-ds111.dtb \
+ kirkwood-ds209.dtb \
+ kirkwood-ds210.dtb \
+ kirkwood-ds212.dtb \
+ kirkwood-ds212j.dtb \
+ kirkwood-ds409.dtb \
+ kirkwood-ds409slim.dtb \
+ kirkwood-ds411.dtb \
+ kirkwood-ds411j.dtb \
+ kirkwood-ds411slim.dtb \
kirkwood-goflexnet.dtb \
kirkwood-guruplug-server-plus.dtb \
kirkwood-ib62x0.dtb \
@@ -111,6 +123,9 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
kirkwood-nsa310a.dtb \
kirkwood-openblocks_a6.dtb \
kirkwood-openblocks_a7.dtb \
+ kirkwood-rs212.dtb \
+ kirkwood-rs409.dtb \
+ kirkwood-rs411.dtb \
kirkwood-sheevaplug.dtb \
kirkwood-sheevaplug-esata.dtb \
kirkwood-topkick.dtb \
diff --git a/arch/arm/boot/dts/kirkwood-ds109.dts b/arch/arm/boot/dts/kirkwood-ds109.dts
new file mode 100644
index 000000000000..bea085ad540a
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds109.dts
@@ -0,0 +1,33 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-ricoh.dtsi"
+#include "synology/fan-speed-150.dtsi"
+#include "synology/fan-gpios-32.dtsi"
+#include "synology/fan-alarm-35-1.dtsi"
+#include "synology/hdd-leds-21-1.dtsi"
+
+/ {
+ model = "Synology DS109, DS110, DS110jv20";
+ compatible = "synology,ds109", "synology,ds110jv20",
+ "synology,ds110", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds110jv10.dts b/arch/arm/boot/dts/kirkwood-ds110jv10.dts
new file mode 100644
index 000000000000..d6b746952947
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds110jv10.dts
@@ -0,0 +1,33 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/fan-speed-150.dtsi"
+#include "synology/fan-gpios-32.dtsi"
+#include "synology/fan-alarm-35-1.dtsi"
+#include "synology/hdd-leds-21-1.dtsi"
+
+/ {
+ model = "Synology DS110j v10 and v30";
+ compatible = "synology,ds110jv10", "synology,ds110jv30",
+ "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds111.dts b/arch/arm/boot/dts/kirkwood-ds111.dts
new file mode 100644
index 000000000000..5f51e088903f
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds111.dts
@@ -0,0 +1,33 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "synology/pcie-2.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/fan-speed-100.dtsi"
+#include "synology/fan-gpios-15.dtsi"
+#include "synology/fan-alarm-35-1.dtsi"
+#include "synology/hdd-leds-21-1.dtsi"
+
+/ {
+ model = "Synology DS111";
+ compatible = "synology,ds111", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds112.dts b/arch/arm/boot/dts/kirkwood-ds112.dts
new file mode 100644
index 000000000000..cda3203a0824
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds112.dts
@@ -0,0 +1,34 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "synology/pcie-2.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/fan-speed-100.dtsi"
+#include "synology/fan-gpios-15.dtsi"
+#include "synology/fan-alarm-35.dtsi"
+#include "synology/hdd-leds-21-2.dtsi"
+#include "synology/hdd-power-30.dtsi"
+
+/ {
+ model = "Synology DS111";
+ compatible = "synology,ds111", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds209.dts b/arch/arm/boot/dts/kirkwood-ds209.dts
new file mode 100644
index 000000000000..b2ebb423e129
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds209.dts
@@ -0,0 +1,33 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-ricoh.dtsi"
+#include "synology/fan-speed-150.dtsi"
+#include "synology/fan-gpios-32.dtsi"
+#include "synology/fan-alarm-35-1.dtsi"
+#include "synology/hdd-leds-21-2.dtsi"
+#include "synology/hdd-power-31.dtsi"
+
+/ {
+ model = "Synology DS209";
+ compatible = "synology,ds209", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds210.dts b/arch/arm/boot/dts/kirkwood-ds210.dts
new file mode 100644
index 000000000000..8623dd63f44d
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds210.dts
@@ -0,0 +1,35 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/fan-speed-150.dtsi"
+#include "synology/fan-gpios-32.dtsi"
+#include "synology/fan-alarm-35-1.dtsi"
+#include "synology/hdd-leds-21-2.dtsi"
+#include "synology/hdd-power-31.dtsi"
+
+/ {
+ model = "Synology DS210 v10, v20, v30, DS211j";
+ compatible = "synology,ds210jv10", "synology,ds210jv20",
+ "synology,ds210jv30", "synology,ds211j",
+ "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds212.dts b/arch/arm/boot/dts/kirkwood-ds212.dts
new file mode 100644
index 000000000000..89e091ce2174
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds212.dts
@@ -0,0 +1,37 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "synology/pcie-2.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/fan-speed-100.dtsi"
+#include "synology/fan-gpios-15.dtsi"
+#include "synology/fan-alarm-35-1.dtsi"
+#include "synology/hdd-leds-21-2.dtsi"
+#include "synology/hdd-power-30-2.dtsi"
+
+/ {
+ model = "Synology DS212, DS212p v10, v20, DS213air v10, DS213 v10";
+ compatible = "synology,ds212", "synology,ds212pv10",
+ "synology,ds212pv10", "synology,ds212pv20",
+ "synology,ds213airv10", "synology,ds213v10",
+ "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds212j.dts b/arch/arm/boot/dts/kirkwood-ds212j.dts
new file mode 100644
index 000000000000..ed14b7bb695e
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds212j.dts
@@ -0,0 +1,34 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/fan-speed-100.dtsi"
+#include "synology/fan-gpios-32.dtsi"
+#include "synology/fan-alarm-35-1.dtsi"
+#include "synology/hdd-leds-21-2.dtsi"
+#include "synology/hdd-power-29.dtsi"
+
+/ {
+ model = "Synology DS212j v10, v20";
+ compatible = "synology,ds212jv10", "synology,ds212jv20",
+ "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds409.dts b/arch/arm/boot/dts/kirkwood-ds409.dts
new file mode 100644
index 000000000000..7000de1add08
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds409.dts
@@ -0,0 +1,34 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-ricoh.dtsi"
+#include "synology/ethernet-1.dtsi"
+#include "synology/fan-speed-120.dtsi"
+#include "synology/fan-gpios-15.dtsi"
+#include "synology/fan-alarm-18.dtsi"
+#include "synology/hdd-leds-36.dtsi"
+#include "synology/alarm-led-12.dtsi"
+
+/ {
+ model = "Synology DS409, DS410j";
+ compatible = "synology,ds409", "synology,ds410j", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds409slim.dts b/arch/arm/boot/dts/kirkwood-ds409slim.dts
new file mode 100644
index 000000000000..0ba525a594f7
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds409slim.dts
@@ -0,0 +1,32 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-ricoh.dtsi"
+#include "synology/fan-speed-120.dtsi"
+#include "synology/fan-gpios-32.dtsi"
+#include "synology/fan-alarm-35-1.dtsi"
+#include "synology/hdd-leds-20.dtsi"
+
+/ {
+ model = "Synology 409slim";
+ compatible = "synology,ds409slim", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds411.dts b/arch/arm/boot/dts/kirkwood-ds411.dts
new file mode 100644
index 000000000000..4c1ca8e85559
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds411.dts
@@ -0,0 +1,35 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "synology/pcie-2.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/ethernet-1.dtsi"
+#include "synology/fan-speed-100.dtsi"
+#include "synology/fan-gpios-15.dtsi"
+#include "synology/fan-alarm-35-1.dtsi"
+#include "synology/hdd-leds-36.dtsi"
+#include "synology/hdd-power-34.dtsi"
+
+/ {
+ model = "Synology DS411, DS413jv10";
+ compatible = "synology,ds411", "synology,ds413jv10", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds411j.dts b/arch/arm/boot/dts/kirkwood-ds411j.dts
new file mode 100644
index 000000000000..7f08a46ddabb
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds411j.dts
@@ -0,0 +1,34 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/ethernet-1.dtsi"
+#include "synology/fan-speed-120.dtsi"
+#include "synology/fan-gpios-15.dtsi"
+#include "synology/fan-alarm-18.dtsi"
+#include "synology/hdd-leds-36.dtsi"
+#include "synology/alarm-led-12.dtsi"
+
+/ {
+ model = "Synology DS411j";
+ compatible = "synology,ds411j", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds411slim.dts b/arch/arm/boot/dts/kirkwood-ds411slim.dts
new file mode 100644
index 000000000000..2e6d66f37002
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds411slim.dts
@@ -0,0 +1,34 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "synology/pcie-2.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/ethernet-1.dtsi"
+#include "synology/fan-speed-100.dtsi"
+#include "synology/fan-gpios-15.dtsi"
+#include "synology/fan-alarm-35-1.dtsi"
+#include "synology/hdd-leds-36.dtsi"
+
+/ {
+ model = "Synology DS411slim";
+ compatible = "synology,ds411slim", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-rs212.dts b/arch/arm/boot/dts/kirkwood-rs212.dts
new file mode 100644
index 000000000000..edc797464983
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rs212.dts
@@ -0,0 +1,34 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "synology/pcie-2.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/fan-speed-100.dtsi"
+#include "synology/fan-gpios-15.dtsi"
+#include "synology/fan-alarm-35-3.dtsi"
+#include "synology/hdd-leds-38.dtsi"
+#include "synology/hdd-power-30-2.dtsi"
+
+/ {
+ model = "Synology RS212";
+ compatible = "synology,rs212", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-rs409.dts b/arch/arm/boot/dts/kirkwood-rs409.dts
new file mode 100644
index 000000000000..906664a99602
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rs409.dts
@@ -0,0 +1,33 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-ricoh.dtsi"
+#include "synology/ethernet-1.dtsi"
+#include "synology/fan-speed-120.dtsi"
+#include "synology/fan-gpios-15.dtsi"
+#include "synology/fan-alarm-18.dtsi"
+#include "synology/hdd-leds-36.dtsi"
+
+/ {
+ model = "Synology RS409";
+ compatible = "synology,rs409", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-rs411.dts b/arch/arm/boot/dts/kirkwood-rs411.dts
new file mode 100644
index 000000000000..75c806ea0dc9
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rs411.dts
@@ -0,0 +1,34 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "synology/pcie-2.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/ethernet-1.dtsi"
+#include "synology/fan-speed-100.dtsi"
+#include "synology/fan-gpios-15.dtsi"
+#include "synology/fan-alarm-35-3.dtsi"
+#include "synology/hdd-leds-36.dtsi"
+
+/ {
+ model = "Synology RS411 RS812";
+ compatible = "synology,rs411", "synology,rs812", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/alarm-led-12.dtsi b/arch/arm/boot/dts/synology/alarm-led-12.dtsi
new file mode 100644
index 000000000000..e6ea8f07d1a5
--- /dev/null
+++ b/arch/arm/boot/dts/synology/alarm-led-12.dtsi
@@ -0,0 +1,28 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_led_12: pmx-led-12 {
+ marvell,pins = "mpp12";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_12>;
+ pinctrl-names = "default";
+ hdd1-green {
+ label = "synology:alarm";
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/common.dtsi b/arch/arm/boot/dts/synology/common.dtsi
new file mode 100644
index 000000000000..fb078c4f9a62
--- /dev/null
+++ b/arch/arm/boot/dts/synology/common.dtsi
@@ -0,0 +1,112 @@
+/*
+ * Nodes which are common to all Synology devices
+ *
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ mbus {
+ pcie-controller {
+ status = "okay";
+
+ pcie@1,0 {
+ status = "okay";
+ };
+ };
+ };
+ ocp@f1000000 {
+ i2c@11000 {
+ status = "okay";
+ clock-frequency = <400000>;
+ pinctrl-0 = <&pmx_twsi0>;
+ pinctrl-names = "default";
+ };
+ serial@12000 {
+ status = "okay";
+ pinctrl-0 = <&pmx_uart0>;
+ pinctrl-names = "default";
+ };
+ serial@12100 {
+ status = "okay";
+ pinctrl-0 = <&pmx_uart1>;
+ pinctrl-names = "default";
+ };
+ poweroff@12100 {
+ compatible = "synology,power-off";
+ reg = <0x12000 0x100>;
+ clocks = <&gate_clk 7>;
+ };
+ spi@10600 {
+ status = "okay";
+ pinctrl-0 = <&pmx_spi>;
+ pinctrl-names = "default";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p80";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ mode = <0>;
+
+ partition@00000000 {
+ reg = <0x00000000 0x00080000>;
+ label = "RedBoot";
+ };
+
+ partition@00080000 {
+ reg = <0x00080000 0x00200000>;
+ label = "zImage";
+ };
+
+ partition@00280000 {
+ reg = <0x00280000 0x00140000>;
+ label = "rd.gz";
+ };
+ partition@003c0000 {
+ reg = <0x003c0000 0x00010000>;
+ label = "vendor";
+ };
+ partition@003d0000 {
+ reg = <0x003d0000 0x00020000>;
+ label = "RedBoot config";
+ };
+ partition@003f0000 {
+ reg = <0x003f0000 0x00010000>;
+ label = "FIS directory";
+ };
+ };
+ };
+ sata@80000 {
+ pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+ pinctrl-names = "default";
+ status = "okay";
+ nr-ports = <2>;
+ };
+ };
+ gpio_fan {
+ compatible = "gpio-fan";
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy0: ethernet-phy {
+ device_type = "ethernet-phy";
+ reg = <8>;
+ };
+};
+
+ð0 {
+ status = "okay";
+ ethernet0-port@0 {
+ phy-handle = <ðphy0>;
+ };
+};
diff --git a/arch/arm/boot/dts/synology/ethernet-1.dtsi b/arch/arm/boot/dts/synology/ethernet-1.dtsi
new file mode 100644
index 000000000000..bf00eff53bbc
--- /dev/null
+++ b/arch/arm/boot/dts/synology/ethernet-1.dtsi
@@ -0,0 +1,15 @@
+&mdio {
+ status = "okay";
+
+ ethphy1: ethernet-phy {
+ device_type = "ethernet-phy";
+ reg = <9>;
+ };
+};
+
+ð0 {
+ status = "okay";
+ ethernet1-port@0 {
+ phy-handle = <ðphy1>;
+ };
+};
diff --git a/arch/arm/boot/dts/synology/fan-alarm-18.dtsi b/arch/arm/boot/dts/synology/fan-alarm-18.dtsi
new file mode 100644
index 000000000000..d323eb0d2109
--- /dev/null
+++ b/arch/arm/boot/dts/synology/fan-alarm-18.dtsi
@@ -0,0 +1,22 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_fan_18: pmx-fan-18 {
+ marvell,pins = "mpp18";
+ marvell,function = "gpo";
+ };
+ };
+ };
+ gpio_fan {
+ alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/arch/arm/boot/dts/synology/fan-alarm-35-1.dtsi b/arch/arm/boot/dts/synology/fan-alarm-35-1.dtsi
new file mode 100644
index 000000000000..12e52fdae870
--- /dev/null
+++ b/arch/arm/boot/dts/synology/fan-alarm-35-1.dtsi
@@ -0,0 +1,22 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_fan_35: pmx-fan-35 {
+ marvell,pins = "mpp35";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ gpio_fan {
+ alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/arch/arm/boot/dts/synology/fan-alarm-35-3.dtsi b/arch/arm/boot/dts/synology/fan-alarm-35-3.dtsi
new file mode 100644
index 000000000000..e2a44f402bf0
--- /dev/null
+++ b/arch/arm/boot/dts/synology/fan-alarm-35-3.dtsi
@@ -0,0 +1,32 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_fan_35: pmx-fan-35 {
+ marvell,pins = "mpp35";
+ marvell,function = "gpio";
+ };
+ pmx_fan_44: pmx-fan-44 {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+ pmx_fan_45: pmx-fan-45 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ gpio_fan {
+ alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH
+ &gpio1 12 GPIO_ACTIVE_HIGH
+ &gpio1 13 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/arch/arm/boot/dts/synology/fan-gpios-15.dtsi b/arch/arm/boot/dts/synology/fan-gpios-15.dtsi
new file mode 100644
index 000000000000..e27cba942eed
--- /dev/null
+++ b/arch/arm/boot/dts/synology/fan-gpios-15.dtsi
@@ -0,0 +1,34 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_fan_15: pmx-fan-15 {
+ marvell,pins = "mpp15";
+ marvell,function = "gpio";
+ };
+ pmx_fan_16: pmx-fan-16 {
+ marvell,pins = "mpp16";
+ marvell,function = "gpio";
+ };
+ pmx_fan_17: pmx-fan-17 {
+ marvell,pins = "mpp17";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ gpio_fan {
+ pinctrl-0 = <&pmx_fan_15 &pmx_fan_16 &pmx_fan_17>;
+ pinctrl-names = "default";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+ &gpio0 16 GPIO_ACTIVE_HIGH
+ &gpio0 17 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/arch/arm/boot/dts/synology/fan-gpios-32.dtsi b/arch/arm/boot/dts/synology/fan-gpios-32.dtsi
new file mode 100644
index 000000000000..d4fd393e71a8
--- /dev/null
+++ b/arch/arm/boot/dts/synology/fan-gpios-32.dtsi
@@ -0,0 +1,34 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_fan_32: pmx-fan-32 {
+ marvell,pins = "mpp32";
+ marvell,function = "gpio";
+ };
+ pmx_fan_33: pmx-fan-33 {
+ marvell,pins = "mpp33";
+ marvell,function = "gpo";
+ };
+ pmx_fan_34: pmx-fan-34 {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ gpio_fan {
+ pinctrl-0 = <&pmx_fan_32 &pmx_fan_33 &pmx_fan_34>;
+ pinctrl-names = "default";
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
+ &gpio1 1 GPIO_ACTIVE_HIGH
+ &gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/arch/arm/boot/dts/synology/fan-speed-100.dtsi b/arch/arm/boot/dts/synology/fan-speed-100.dtsi
new file mode 100644
index 000000000000..5188ba59a9b2
--- /dev/null
+++ b/arch/arm/boot/dts/synology/fan-speed-100.dtsi
@@ -0,0 +1,20 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ gpio_fan {
+ gpio-fan,speed-map = < 0 0
+ 2500 1
+ 3100 2
+ 3800 3
+ 4600 4
+ 4800 5
+ 4900 6
+ 5000 7 >;
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/fan-speed-120.dtsi b/arch/arm/boot/dts/synology/fan-speed-120.dtsi
new file mode 100644
index 000000000000..90157070492c
--- /dev/null
+++ b/arch/arm/boot/dts/synology/fan-speed-120.dtsi
@@ -0,0 +1,20 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ gpio_fan {
+ gpio-fan,speed-map = < 0 0
+ 2500 1
+ 2700 2
+ 3000 4
+ 3600 3
+ 3800 5
+ 3900 6
+ 4300 7 >;
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/fan-speed-150.dtsi b/arch/arm/boot/dts/synology/fan-speed-150.dtsi
new file mode 100644
index 000000000000..6abc36915886
--- /dev/null
+++ b/arch/arm/boot/dts/synology/fan-speed-150.dtsi
@@ -0,0 +1,20 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ gpio_fan {
+ gpio-fan,speed-map = < 0 0
+ 2200 1
+ 2500 2
+ 3000 4
+ 3300 3
+ 3700 5
+ 3800 6
+ 4200 7 >;
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-leds-20.dtsi b/arch/arm/boot/dts/synology/hdd-leds-20.dtsi
new file mode 100644
index 000000000000..e6663ea7014c
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-leds-20.dtsi
@@ -0,0 +1,90 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_led_20: pmx-led-20 {
+ marvell,pins = "mpp20";
+ marvell,function = "gpio";
+ };
+ pmx_led_21: pmx-led-21 {
+ marvell,pins = "mpp21";
+ marvell,function = "gpio";
+ };
+ pmx_led_22: pmx-led-22 {
+ marvell,pins = "mpp22";
+ marvell,function = "gpio";
+ };
+ pmx_led_23: pmx-led-23 {
+ marvell,pins = "mpp23";
+ marvell,function = "gpio";
+ };
+ pmx_led_24: pmx-led-24 {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+ pmx_led_25: pmx-led-25 {
+ marvell,pins = "mpp25";
+ marvell,function = "gpio";
+ };
+ pmx_led_26: pmx-led-26 {
+ marvell,pins = "mpp26";
+ marvell,function = "gpio";
+ };
+ pmx_led_27: pmx-led-27 {
+ marvell,pins = "mpp27";
+ marvell,function = "gpio";
+ };
+ pmx_led_28: pmx-led-28 {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_20 &pmx_led_21 &pmx_led_22
+ &pmx_led_23 &pmx_led_24 &pmx_led_25
+ &pmx_led_26 &pmx_led_27>;
+ pinctrl-names = "default";
+ hdd1-green {
+ label = "synology:green:hdd1";
+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ };
+ hdd1-amber {
+ label = "synology:amber:hdd1";
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ };
+ hdd2-green {
+ label = "synology:green:hdd2";
+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+ };
+ hdd2-amber {
+ label = "synology:amber:hdd2";
+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+ };
+ hdd3-green {
+ label = "synology:green:hdd3";
+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+ };
+ hdd3-amber {
+ label = "synology:amber:hdd3";
+ gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+ };
+ hdd4-green {
+ label = "synology:green:hdd4";
+ gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+ };
+ hdd4-amber {
+ label = "synology:amber:hdd4";
+ gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-leds-21-1.dtsi b/arch/arm/boot/dts/synology/hdd-leds-21-1.dtsi
new file mode 100644
index 000000000000..034323f9ffb0
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-leds-21-1.dtsi
@@ -0,0 +1,36 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_led_21: pmx-led-21 {
+ marvell,pins = "mpp21";
+ marvell,function = "gpio";
+ };
+ pmx_led_23: pmx-led-23 {
+ marvell,pins = "mpp23";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_21 &pmx_led_23>;
+ pinctrl-names = "default";
+ hdd1-green {
+ label = "synology:green:hdd1";
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ };
+ hdd1-amber {
+ label = "synology:amber:hdd1";
+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-leds-21-2.dtsi b/arch/arm/boot/dts/synology/hdd-leds-21-2.dtsi
new file mode 100644
index 000000000000..446a28f2200b
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-leds-21-2.dtsi
@@ -0,0 +1,52 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_led_20: pmx-led-20 {
+ marvell,pins = "mpp20";
+ marvell,function = "gpio";
+ };
+ pmx_led_21: pmx-led-21 {
+ marvell,pins = "mpp21";
+ marvell,function = "gpio";
+ };
+ pmx_led_22: pmx-led-22 {
+ marvell,pins = "mpp22";
+ marvell,function = "gpio";
+ };
+ pmx_led_23: pmx-led-23 {
+ marvell,pins = "mpp23";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_21 &pmx_led_23 &pmx_led_20 &pmx_led_22>;
+ pinctrl-names = "default";
+ hdd1-green {
+ label = "synology:green:hdd1";
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ };
+ hdd1-amber {
+ label = "synology:amber:hdd1";
+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+ };
+ hdd2-green {
+ label = "synology:green:hdd2";
+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ };
+ hdd2-amber {
+ label = "synology:amber:hdd2";
+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-leds-36.dtsi b/arch/arm/boot/dts/synology/hdd-leds-36.dtsi
new file mode 100644
index 000000000000..9541c0c943e6
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-leds-36.dtsi
@@ -0,0 +1,103 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_led_36: pmx-led-36 {
+ marvell,pins = "mpp36";
+ marvell,function = "gpio";
+ };
+ pmx_led_37: pmx-led-37 {
+ marvell,pins = "mpp37";
+ marvell,function = "gpio";
+ };
+ pmx_led_38: pmx-led-38 {
+ marvell,pins = "mpp38";
+ marvell,function = "gpio";
+ };
+ pmx_led_39: pmx-led-39 {
+ marvell,pins = "mpp39";
+ marvell,function = "gpio";
+ };
+ pmx_led_40: pmx-led-40 {
+ marvell,pins = "mpp40";
+ marvell,function = "gpio";
+ };
+ pmx_led_41: pmx-led-41 {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+ pmx_led_42: pmx-led-42 {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+ pmx_led_43: pmx-led-43 {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+ pmx_led_44: pmx-led-44 {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+ pmx_led_45: pmx-led-45 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_36 &pmx_led_37 &pmx_led_38
+ &pmx_led_39 &pmx_led_40 &pmx_led_41
+ &pmx_led_42 &pmx_led_43 &pmx_led_44
+ &pmx_led_45>;
+ pinctrl-names = "default";
+ hdd1-green {
+ label = "synology:green:hdd1";
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ };
+ hdd1-amber {
+ label = "synology:amber:hdd1";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+ hdd2-green {
+ label = "synology:green:hdd2";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ };
+ hdd2-amber {
+ label = "synology:amber:hdd2";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+ hdd3-green {
+ label = "synology:green:hdd3";
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ };
+ hdd3-amber {
+ label = "synology:amber:hdd3";
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+ hdd4-green {
+ label = "synology:green:hdd4";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ };
+ hdd4-amber {
+ label = "synology:amber:hdd4";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ };
+ hdd5-green {
+ label = "synology:green:hdd5";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+ hdd5-amber {
+ label = "synology:amber:hdd5";
+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-leds-38.dtsi b/arch/arm/boot/dts/synology/hdd-leds-38.dtsi
new file mode 100644
index 000000000000..d2fe351a0808
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-leds-38.dtsi
@@ -0,0 +1,52 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_led_38: pmx-led-38 {
+ marvell,pins = "mpp38";
+ marvell,function = "gpio";
+ };
+ pmx_led_39: pmx-led-39 {
+ marvell,pins = "mpp39";
+ marvell,function = "gpio";
+ };
+ pmx_led_36: pmx-led-36 {
+ marvell,pins = "mpp36";
+ marvell,function = "gpio";
+ };
+ pmx_led_37: pmx-led-37 {
+ marvell,pins = "mpp37";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_38 &pmx_led_39 &pmx_led_36 &pmx_led_37>;
+ pinctrl-names = "default";
+ hdd1-green {
+ label = "synology:green:hdd1";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ };
+ hdd1-amber {
+ label = "synology:amber:hdd1";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+ hdd2-green {
+ label = "synology:green:hdd2";
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ };
+ hdd2-amber {
+ label = "synology:amber:hdd2";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-power-29.dtsi b/arch/arm/boot/dts/synology/hdd-power-29.dtsi
new file mode 100644
index 000000000000..8b08c86ab942
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-power-29.dtsi
@@ -0,0 +1,56 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_hdd1_pwr_29: pmx-hdd1-pwr-29 {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+ pmx_hdd2_pwr_31: pmx-hdd2-pwr-31 {
+ marvell,pins = "mpp31";
+ marvell,function = "gpio";
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_hdd1_pwr_29 &pmx_hdd2_pwr_31>;
+ pinctrl-names = "default";
+
+ hdd1_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "hdd1power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ };
+ hdd2_power: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "hdd2power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-power-30-1.dtsi b/arch/arm/boot/dts/synology/hdd-power-30-1.dtsi
new file mode 100644
index 000000000000..b0998d4e231f
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-power-30-1.dtsi
@@ -0,0 +1,40 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_hdd1_pwr_30: pmx-hdd-pwr-30 {
+ marvell,pins = "mpp30";
+ marvell,function = "gpio";
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_hdd1_pwr_30>;
+ pinctrl-names = "default";
+
+ hdd1_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "hdd1power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-power-30-2.dtsi b/arch/arm/boot/dts/synology/hdd-power-30-2.dtsi
new file mode 100644
index 000000000000..766e6352d5af
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-power-30-2.dtsi
@@ -0,0 +1,56 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_hdd1_pwr_30: pmx-hdd-pwr-30 {
+ marvell,pins = "mpp30";
+ marvell,function = "gpio";
+ };
+ pmx_hdd2_pwr_34: pmx-hdd2-pwr-34 {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34>;
+ pinctrl-names = "default";
+
+ hdd1_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "hdd1power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+ };
+ hdd2_power: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "hdd2power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-power-30-4.dtsi b/arch/arm/boot/dts/synology/hdd-power-30-4.dtsi
new file mode 100644
index 000000000000..5bbced207965
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-power-30-4.dtsi
@@ -0,0 +1,89 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_hdd1_pwr_30: pmx-hdd-pwr-30 {
+ marvell,pins = "mpp30";
+ marvell,function = "gpio";
+ };
+ pmx_hdd2_pwr_34: pmx-hdd2-pwr-34 {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+ pmx_hdd3_pwr_44: pmx-hdd3-pwr-44 {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+ pmx_hdd4_pwr_45: pmx-hdd4-pwr-45 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34
+ &pmx_hdd3_pwr_44 &pmx_hdd4_pwr_45>;
+ pinctrl-names = "default";
+
+ hdd1_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "hdd1power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+ };
+ hdd2_power: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "hdd2power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+ hdd3_power: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "hdd3power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ };
+ hdd4_power: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "hdd3power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 32 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-power-31.dtsi b/arch/arm/boot/dts/synology/hdd-power-31.dtsi
new file mode 100644
index 000000000000..0774ecdcaf64
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-power-31.dtsi
@@ -0,0 +1,40 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_hdd2_pwr_31: pmx-hdd2-pwr-31 {
+ marvell,pins = "mpp31";
+ marvell,function = "gpio";
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_hdd2_pwr_31>;
+ pinctrl-names = "default";
+
+ hdd2_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "hdd2power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-power-34.dtsi b/arch/arm/boot/dts/synology/hdd-power-34.dtsi
new file mode 100644
index 000000000000..d90becf582f1
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-power-34.dtsi
@@ -0,0 +1,73 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_hdd2_pwr_34: pmx-hdd2-pwr-34 {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+ pmx_hdd3_pwr_44: pmx-hdd3-pwr-44 {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+ pmx_hdd4_pwr_45: pmx-hdd4-pwr-45 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_hdd2_pwr_34 &pmx_hdd3_pwr_44
+ &pmx_hdd4_pwr_45>;
+ pinctrl-names = "default";
+
+ hdd2_power: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "hdd2power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+ hdd3_power: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "hdd3power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ };
+ hdd4_power: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "hdd3power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 32 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/i2c-rtc-ricoh.dtsi b/arch/arm/boot/dts/synology/i2c-rtc-ricoh.dtsi
new file mode 100644
index 000000000000..2305bc8b0a06
--- /dev/null
+++ b/arch/arm/boot/dts/synology/i2c-rtc-ricoh.dtsi
@@ -0,0 +1,18 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ i2c@11000 {
+ rs5c372: rs5c372@32 {
+ compatible = "ricoy,rs5c372a";
+ reg = <0x32>;
+ };
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/i2c-rtc-seiko.dtsi b/arch/arm/boot/dts/synology/i2c-rtc-seiko.dtsi
new file mode 100644
index 000000000000..4b5054bb4a87
--- /dev/null
+++ b/arch/arm/boot/dts/synology/i2c-rtc-seiko.dtsi
@@ -0,0 +1,18 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ i2c@11000 {
+ s35390a: s35390a@30 {
+ compatible = "sii,s35390a";
+ reg = <0x30>;
+ };
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/pcie-2.dtsi b/arch/arm/boot/dts/synology/pcie-2.dtsi
new file mode 100644
index 000000000000..e34ebb5515c2
--- /dev/null
+++ b/arch/arm/boot/dts/synology/pcie-2.dtsi
@@ -0,0 +1,19 @@
+/*
+ * Nodes which are common to all Synology devices
+ *
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ mbus {
+ pcie-controller {
+ pcie@2,0 {
+ status = "okay";
+ };
+ };
+ };
+};
\ No newline at end of file
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 5+ messages in thread