From: Wolfram Sang <wsa@the-dreams.de>
To: linux-sh@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
Magnus Damm <magnus.damm@gmail.com>,
Simon Horman <horms@verge.net.au>,
Wolfram Sang <wsa@sang-engineering.com>
Subject: [PATCH 2/5] ARM: shmobile: r8a7791: add i2c master nodes to dtsi
Date: Sun, 16 Feb 2014 10:40:55 +0100 [thread overview]
Message-ID: <1392543658-5030-3-git-send-email-wsa@the-dreams.de> (raw)
In-Reply-To: <1392543658-5030-1-git-send-email-wsa@the-dreams.de>
From: Wolfram Sang <wsa@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@sang-engineering.com>
---
arch/arm/boot/dts/r8a7791.dtsi | 69 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 69 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 41194fe..5807b7a 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -19,6 +19,15 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -170,6 +179,66 @@
<0 17 IRQ_TYPE_LEVEL_HIGH>;
};
+ i2c0: i2c@e6508000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7791", "renesas,i2c-r8a7790";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7791_CLK_I2C0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e6518000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7791", "renesas,i2c-r8a7790";
+ reg = <0 0xe6518000 0 0x40>;
+ interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7791_CLK_I2C1>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@e6530000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7791", "renesas,i2c-r8a7790";
+ reg = <0 0xe6530000 0 0x40>;
+ interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7791_CLK_I2C2>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e6540000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7791", "renesas,i2c-r8a7790";
+ reg = <0 0xe6540000 0 0x40>;
+ interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7791_CLK_I2C3>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@e6520000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7791", "renesas,i2c-r8a7790";
+ reg = <0 0xe6520000 0 0x40>;
+ interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7791_CLK_I2C4>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@e6528000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7791", "renesas,i2c-r8a7790";
+ reg = <0 0xe6528000 0 0x40>;
+ interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7791_CLK_I2C5>;
+ status = "disabled";
+ };
+
pfc: pfc@e6060000 {
compatible = "renesas,pfc-r8a7791";
reg = <0 0xe6060000 0 0x250>;
--
1.8.5.1
next prev parent reply other threads:[~2014-02-16 9:40 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-16 9:40 [PATCH 0/5] enable i2c on koelsch-dt (and cleanup lager) Wolfram Sang
2014-02-16 9:40 ` [PATCH 1/5] ARM: shmobile: r8a7791: remove superfluous interrupt-parents Wolfram Sang
2014-02-16 9:40 ` Wolfram Sang [this message]
2014-02-17 7:54 ` [PATCH 2/5] ARM: shmobile: r8a7791: add i2c master nodes to dtsi Wolfram Sang
2014-02-17 8:02 ` Magnus Damm
2014-02-17 9:11 ` Geert Uytterhoeven
2014-02-17 9:19 ` Wolfram Sang
2014-02-17 9:23 ` Geert Uytterhoeven
2014-02-17 9:31 ` Wolfram Sang
2014-02-17 10:03 ` Magnus Damm
2014-02-17 10:08 ` Wolfram Sang
2014-02-17 10:11 ` Magnus Damm
2014-02-17 10:25 ` Wolfram Sang
2014-02-17 9:12 ` Wolfram Sang
2014-02-17 9:57 ` Magnus Damm
2014-02-16 9:40 ` [PATCH 3/5] ARM: shmobile: r8a7791: add i2c2 bus to koelsch dt Wolfram Sang
2014-02-16 9:40 ` [PATCH 4/5] ARM: shmobile: r8a7790: remove superfluous interrupt-parents Wolfram Sang
2014-02-16 9:40 ` [PATCH 5/5] ARM: shmobile: r8a7790: add i2c aliases to dtsi Wolfram Sang
2014-02-17 3:13 ` [PATCH 0/5] enable i2c on koelsch-dt (and cleanup lager) Magnus Damm
2014-02-17 3:19 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1392543658-5030-3-git-send-email-wsa@the-dreams.de \
--to=wsa@the-dreams.de \
--cc=devicetree@vger.kernel.org \
--cc=horms@verge.net.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=wsa@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).