[RFC PATCH v3 7/9] ARM: dts: imx53: Add IPU DI ports and endpoints, move imx-drm node to dtsi

[Philipp Zabel <p.zabel@pengutronix.de>]

This patch connects IPU and display encoder (VGA, LVDS)
device tree nodes, as well as parallel displays on the DISP0
and DISP1 outputs, using the OF graph bindings described in
Documentation/devicetree/bindings/media/video-interfaces.txt

The IPU ports correspond to the two display interfaces. The
order of endpoints in the ports is arbitrary.

Since the imx-drm node now only needs to contain links to the
display interfaces, it can be moved to the SoC dtsi level. At
the board level, only connections between the display interface
ports and encoders or panels have to be added.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 arch/arm/boot/dts/imx53-m53evk.dts | 17 +++++-----
 arch/arm/boot/dts/imx53-mba53.dts  | 15 +++++----
 arch/arm/boot/dts/imx53-qsb.dts    | 17 +++++-----
 arch/arm/boot/dts/imx53.dtsi       | 64 +++++++++++++++++++++++++++++++++++---
 4 files changed, 89 insertions(+), 24 deletions(-)

diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
index ee6107b..0298adc 100644
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ b/arch/arm/boot/dts/imx53-m53evk.dts
@@ -23,7 +23,6 @@
 	soc {
 		display1: display@di1 {
 			compatible = "fsl,imx-parallel-display";
-			crtcs = <&ipu 1>;
 			interface-pix-fmt = "bgr666";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_ipu_disp2_1>;
@@ -44,6 +43,12 @@
 				};
 			};
 		};
+
+		port {
+			display1_in: endpoint {
+				remote-endpoint = <&ipu_di1_disp1>;
+			};
+		};
 	};
 
 	backlight {
@@ -53,12 +58,6 @@
 		default-brightness-level = <6>;
 	};
 
-	imx-drm {
-		compatible = "fsl,imx-drm";
-		crtcs = <&ipu 1>;
-		connectors = <&display1>;
-	};
-
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -227,6 +226,10 @@
 	};
 };
 
+&ipu_di1_disp1 {
+	remote-endpoint = <&display1_in>;
+};
+
 &nfc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_nand_1>;
diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
index 9b6e769..3c3d69e 100644
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@@ -38,15 +38,14 @@
 		compatible = "fsl,imx-parallel-display";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_disp1_1>;
-		crtcs = <&ipu 1>;
 		interface-pix-fmt = "rgb24";
 		status = "disabled";
-	};
 
-	imx-drm {
-		compatible = "fsl,imx-drm";
-		crtcs = <&ipu 1>;
-		connectors = <&disp1>, <&tve>;
+		port {
+			display1_in: endpoint {
+				remote-endpoint = <&ipu_di1_disp1>;
+			};
+		};
 	};
 
 	reg_3p2v: 3p2v {
@@ -147,6 +146,10 @@
 	};
 };
 
+&ipu_di1_disp1 {
+	remote-endpoint = <&display1_in>;
+};
+
 &cspi {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index 3cb4f77..8b25428 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -23,7 +23,6 @@
 
 	display0: display@di0 {
 		compatible = "fsl,imx-parallel-display";
-		crtcs = <&ipu 0>;
 		interface-pix-fmt = "rgb565";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ipu_disp0_1>;
@@ -46,6 +45,12 @@
 				pixelclk-active = <0>;
 			};
 		};
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp0>;
+			};
+		};
 	};
 
 	gpio-keys {
@@ -72,12 +77,6 @@
 		};
 	};
 
-	imx-drm {
-		compatible = "fsl,imx-drm";
-		crtcs = <&ipu 0>;
-		connectors = <&display0>;
-	};
-
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -132,6 +131,10 @@
 	status = "okay";
 };
 
+&ipu_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
 &ssi2 {
 	fsl,mode = "i2s-slave";
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 4307e80..5b89b91 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -45,6 +45,11 @@
 		};
 	};
 
+	imx-drm {
+		compatible = "fsl,imx-drm";
+		ports = <&ipu_di0>, <&ipu_di1>;
+	};
+
 	tzic: tz-interrupt-controller@0fffc000 {
 		compatible = "fsl,imx53-tzic", "fsl,tzic";
 		interrupt-controller;
@@ -85,13 +90,49 @@
 		ranges;
 
 		ipu: ipu@18000000 {
-			#crtc-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			compatible = "fsl,imx53-ipu";
 			reg = <0x18000000 0x080000000>;
 			interrupts = <11 10>;
 			clocks = <&clks 59>, <&clks 110>, <&clks 61>;
 			clock-names = "bus", "di0", "di1";
 			resets = <&src 2>;
+
+			ipu_di0: port@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+
+				ipu_di0_disp0: endpoint@0 {
+					reg = <0>;
+				};
+
+				ipu_di0_lvds0: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&lvds0_in>;
+				};
+			};
+
+			ipu_di1: port@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+
+				ipu_di1_disp1: endpoint@0 {
+					reg = <0>;
+				};
+
+				ipu_di1_lvds1: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&lvds1_in>;
+				};
+
+				ipu_di1_tve: endpoint@2 {
+					reg = <2>;
+					remote-endpoint = <&tve_in>;
+				};
+			};
 		};
 
 		aips@50000000 { /* AIPS1 */
@@ -838,14 +879,24 @@
 
 				lvds-channel@0 {
 					reg = <0>;
-					crtcs = <&ipu 0>;
 					status = "disabled";
+
+					port {
+						lvds0_in: endpoint {
+							remote-endpoint = <&ipu_di0_lvds0>;
+						};
+					};
 				};
 
 				lvds-channel@1 {
 					reg = <1>;
-					crtcs = <&ipu 1>;
 					status = "disabled";
+
+					port {
+						lvds1_in: endpoint {
+							remote-endpoint = <&ipu_di0_lvds0>;
+						};
+					};
 				};
 			};
 
@@ -1103,8 +1154,13 @@
 				interrupts = <92>;
 				clocks = <&clks 69>, <&clks 116>;
 				clock-names = "tve", "di_sel";
-				crtcs = <&ipu 1>;
 				status = "disabled";
+
+				port {
+					tve_in: endpoint {
+						remote-endpoint = <&ipu_di1_tve>;
+					};
+				};
 			};
 
 			vpu: vpu@63ff4000 {
-- 
1.8.5.3