* [PATCH] ARM: dts: imx6qdl-sabreauto: Support debug LED
@ 2014-02-19 7:15 Liu Ying
[not found] ` <1392794148-335-1-git-send-email-Ying.Liu-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
0 siblings, 1 reply; 2+ messages in thread
From: Liu Ying @ 2014-02-19 7:15 UTC (permalink / raw)
To: shawn.guo; +Cc: devicetree, linux-arm-kernel, kernel
The D9 LED controlled by gpio on the imx6qdl-sabreauto
CPU board is a debug LED according to the board design.
This patch adds the relevant device tree nodes to the
imx6qdl-sabreauto device tree file to support this LED.
Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
---
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 33e9bff..009abd6 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -10,11 +10,24 @@
* http://www.gnu.org/copyleft/gpl.html
*/
+#include <dt-bindings/gpio/gpio.h>
+
/ {
memory {
reg = <0x10000000 0x80000000>;
};
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ user {
+ label = "debug";
+ gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
sound-spdif {
compatible = "fsl,imx-audio-spdif",
"fsl,imx-sabreauto-spdif";
@@ -217,6 +230,12 @@
>;
};
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x80000000
+ >;
+ };
+
pinctrl_gpmi_nand: gpminandgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
--
1.7.9.5
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-02-20 1:40 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-02-19 7:15 [PATCH] ARM: dts: imx6qdl-sabreauto: Support debug LED Liu Ying
[not found] ` <1392794148-335-1-git-send-email-Ying.Liu-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2014-02-20 1:40 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).