* [PATCH 2/2] ARM: dts: imx6sx: add initial imx6sx sdb support
[not found] ` <1392796036-19094-1-git-send-email-b20788-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
@ 2014-02-19 7:47 ` Anson Huang
0 siblings, 0 replies; 3+ messages in thread
From: Anson Huang @ 2014-02-19 7:47 UTC (permalink / raw)
To: shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA
Add initial imx6sx sdb board support with uart and usdhc enabled.
Signed-off-by: Anson Huang <b20788-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
arch/arm/boot/dts/imx6sx-sdb.dts | 41 ++++++++++++++++++++++++++++++++++++++
1 file changed, 41 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6sx-sdb.dts
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
new file mode 100644
index 0000000..3db4750
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "imx6sx.dtsi"
+
+/ {
+ model = "Freescale i.MX6 SoloX SDB Board";
+ compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_1>;
+ status = "okay";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4_1>;
+ bus-width = <8>;
+ non-removable;
+ no-1-8-v;
+ status = "okay";
+};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 1/2] ARM: dts: add device tree source for imx6sx SoC
@ 2014-02-19 7:53 Anson Huang
[not found] ` <1392796432-19127-1-git-send-email-b20788-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
0 siblings, 1 reply; 3+ messages in thread
From: Anson Huang @ 2014-02-19 7:53 UTC (permalink / raw)
To: shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Add device tree support for i.MX6SoloX SOC.
Signed-off-by: Anson Huang <b20788-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
arch/arm/boot/dts/imx6sx.dtsi | 524 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 524 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6sx.dtsi
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
new file mode 100644
index 0000000..6703b25
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -0,0 +1,524 @@
+/*
+ * Copyright 2011, 2014 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <dt-bindings/clock/imx6sx-clock.h>
+#include "imx6sx-pinfunc.h"
+#include "skeleton.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart1;
+ serial1 = &uart2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ intc: interrupt-controller@00a01000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ reg = <0x00a01000 0x1000>,
+ <0x00a00100 0x100>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ckil {
+ compatible = "fsl,imx-ckil", "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ osc {
+ compatible = "fsl,imx-osc", "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ L2: l2-cache@00a02000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x00a02000 0x1000>;
+ interrupts = <0 92 0x04>;
+ cache-unified;
+ cache-level = <2>;
+ arm,tag-latency = <4 2 3>;
+ arm,data-latency = <4 2 3>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <0 94 0x04>;
+ };
+
+ aips-bus@02000000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02000000 0x100000>;
+ ranges;
+
+ spba-bus@02000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02000000 0x40000>;
+ ranges;
+
+ uart1: serial@02020000 {
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x02020000 0x4000>;
+ interrupts = <0 26 0x04>;
+ clocks = <&clks IMX6SX_CLK_UART_IPG>, <&clks IMX6SX_CLK_UART_SERIAL>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ spba@0203c000 {
+ reg = <0x0203c000 0x4000>;
+ };
+ };
+
+ aipstz@0207c000 {
+ reg = <0x0207c000 0x4000>;
+ };
+
+ gpt: gpt@02098000 {
+ compatible = "fsl,imx6sx-gpt";
+ reg = <0x02098000 0x4000>;
+ interrupts = <0 55 0x04>;
+ clocks = <&clks IMX6SX_CLK_GPT_BUS>, <&clks IMX6SX_CLK_GPT_SERIAL>;
+ clock-names = "ipg", "per";
+ };
+
+ wdog1: wdog@020bc000 {
+ compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
+ reg = <0x020bc000 0x4000>;
+ interrupts = <0 80 0x04>;
+ clocks = <&clks IMX6SX_CLK_DUMMY>;
+ };
+
+ clks: ccm@020c4000 {
+ compatible = "fsl,imx6sx-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <0 87 0x04 0 88 0x04>;
+ #clock-cells = <1>;
+ };
+
+ anatop: anatop@020c8000 {
+ compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop",
+ "syscon", "simple-bus";
+ reg = <0x020c8000 0x1000>;
+ interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
+ };
+
+ snvs@020cc000 {
+ compatible = "fsl,sec-v4.0-mon", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x020cc000 0x4000>;
+
+ snvs-rtc-lp@34 {
+ compatible = "fsl,sec-v4.0-mon-rtc-lp";
+ reg = <0x34 0x58>;
+ interrupts = <0 19 0x04 0 20 0x04>;
+ };
+ };
+
+ src: src@020d8000 {
+ compatible = "fsl,imx6q-src", "fsl,imx51-src";
+ reg = <0x020d8000 0x4000>;
+ interrupts = <0 91 0x04 0 96 0x04>;
+ #reset-cells = <1>;
+ };
+
+ gpc: gpc@020dc000 {
+ compatible = "fsl,imx6q-gpc";
+ reg = <0x020dc000 0x4000>;
+ interrupts = <0 89 0x04>;
+ };
+
+ iomuxc: iomuxc@020e0000 {
+ compatible = "fsl,imx6sx-iomuxc";
+ reg = <0x020e0000 0x4000>;
+ };
+
+ gpr: iomuxc-gpr@020e4000 {
+ compatible = "fsl,imx6sx-iomuxc-gpr", "syscon";
+ reg = <0x020e4000 0x4000>;
+ };
+
+ sdma: sdma@020ec000 {
+ compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
+ reg = <0x020ec000 0x4000>;
+ interrupts = <0 2 0x04>;
+ clocks = <&clks IMX6SX_CLK_SDMA>, <&clks IMX6SX_CLK_SDMA>;
+ clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6sx.bin";
+ };
+ };
+
+ aips-bus@02100000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02100000 0x100000>;
+ ranges;
+
+ aipstz@0217c000 {
+ reg = <0x0217c000 0x4000>;
+ };
+
+ fec1: ethernet@02188000 {
+ compatible = "fsl,imx6sx-fec";
+ reg = <0x02188000 0x4000>;
+ interrupts = <0 118 0x04 0 119 0x04>;
+ clocks = <&clks IMX6SX_CLK_ENET>, <&clks IMX6SX_CLK_ENET_AHB>,
+ <&clks IMX6SX_CLK_ENET_PTP>, <&clks IMX6SX_CLK_ENET_REF>;
+ clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
+ status = "disabled";
+ };
+
+ usdhc3: usdhc@02198000 {
+ compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+ reg = <0x02198000 0x4000>;
+ interrupts = <0 24 0x04>;
+ clocks = <&clks IMX6SX_CLK_USDHC3>, <&clks IMX6SX_CLK_USDHC3>, <&clks IMX6SX_CLK_USDHC3>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usdhc4: usdhc@0219c000 {
+ compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+ reg = <0x0219c000 0x4000>;
+ interrupts = <0 25 0x04>;
+ clocks = <&clks IMX6SX_CLK_USDHC4>, <&clks IMX6SX_CLK_USDHC4>, <&clks IMX6SX_CLK_USDHC4>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@021a0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
+ reg = <0x021a0000 0x4000>;
+ interrupts = <0 36 0x04>;
+ clocks = <&clks IMX6SX_CLK_I2C1>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@021a4000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
+ reg = <0x021a4000 0x4000>;
+ interrupts = <0 37 0x04>;
+ clocks = <&clks IMX6SX_CLK_I2C2>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@021a8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
+ reg = <0x021a8000 0x4000>;
+ interrupts = <0 38 0x04>;
+ clocks = <&clks IMX6SX_CLK_I2C3>;
+ status = "disabled";
+ };
+
+ romcp@021ac000 {
+ compatible = "fsl,imx6sx-romcp", "syscon";
+ reg = <0x021ac000 0x4000>;
+ };
+
+ mmdc0: mmdc@021b0000 {
+ compatible = "fsl,imx6q-mmdc";
+ reg = <0x021b0000 0x4000>;
+ };
+
+ fec2: ethernet@021b4000 {
+ compatible = "fsl,imx6sx-fec";
+ reg = <0x021b4000 0x4000>;
+ interrupts = <0 102 0x04 0 103 0x04>;
+ clocks = <&clks IMX6SX_CLK_ENET>, <&clks IMX6SX_CLK_ENET_AHB>,
+ <&clks IMX6SX_CLK_ENET_PTP>, <&clks IMX6SX_CLK_ENET2_REF_125M>;
+ clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
+ status = "disabled";
+ };
+
+ tzasc@021d0000 {
+ reg = <0x021d0000 0x4000>;
+ interrupts = <0 108 0x04>;
+ };
+
+ uart2: serial@021e8000 {
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x021e8000 0x4000>;
+ interrupts = <0 27 0x04>;
+ clocks = <&clks IMX6SX_CLK_UART_IPG>, <&clks IMX6SX_CLK_UART_SERIAL>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2c4: i2c@021f8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
+ reg = <0x021f8000 0x4000>;
+ interrupts = <0 35 0x04>;
+ clocks = <&clks IMX6SX_CLK_I2C4>;
+ status = "disabled";
+ };
+ };
+
+ aips-bus@02200000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02200000 0x100000>;
+ ranges;
+
+ spba-bus@02200000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02240000 0x40000>;
+ ranges;
+
+ spba@0223c000 {
+ reg = <0x0223c000 0x4000>;
+ };
+ };
+
+ aipstz@0227c000 {
+ reg = <0x0227c000 0x4000>;
+ };
+ };
+ };
+};
+
+&iomuxc {
+
+ enet1 {
+ pinctrl_enet1_1: enet1grp-1 {
+ fsl,pins = <
+ MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1
+ MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1
+ MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0xa0b1
+ MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1
+ MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1
+ MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0xa0b1
+ MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0xa0b1
+ MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1
+ MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081
+ MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081
+ MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081
+ MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081
+ MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081
+ MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081
+ >;
+ };
+ };
+
+ enet2 {
+ pinctrl_enet2_1: enet2grp-1 {
+ fsl,pins = <
+ MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0xa0b1
+ MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0xa0b1
+ MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0xa0b0
+ MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0xa0b0
+ MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0xa0b0
+ MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0xa0b0
+ MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081
+ MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081
+ MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081
+ MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081
+ MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081
+ MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081
+ >;
+ };
+ };
+
+ i2c1 {
+ pinctrl_i2c1_1: i2c1grp-1 {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1
+ MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c1_2: i2c1grp-2 {
+ fsl,pins = <
+ MX6SX_PAD_CSI_DATA01__I2C1_SDA 0x4001b8b1
+ MX6SX_PAD_CSI_DATA00__I2C1_SCL 0x4001b8b1
+ >;
+ };
+ };
+
+ i2c2 {
+ pinctrl_i2c2_1: i2c2grp-1 {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x4001b8b1
+ MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1
+ >;
+ };
+ };
+
+ i2c3 {
+ pinctrl_i2c3_1: i2c3grp-1 {
+ fsl,pins = <
+ MX6SX_PAD_ENET2_TX_CLK__I2C3_SDA 0x4001b8b1
+ MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3_2: i2c3grp-2 {
+ fsl,pins = <
+ MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x4001b8b1
+ MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1
+ >;
+ };
+ };
+
+ i2c4 {
+ pinctrl_i2c4_1: i2c4grp-1 {
+ fsl,pins = <
+ MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x4001b8b1
+ MX6SX_PAD_CSI_DATA06__I2C4_SCL 0x4001b8b1
+ >;
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1_1: uart1grp-1 {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart1_2: uart1grp-2 {
+ fsl,pins = <
+ MX6SX_PAD_ENET2_COL__UART1_RX 0x1b0b1
+ MX6SX_PAD_ENET2_CRS__UART1_TX 0x1b0b1
+ >;
+ };
+ };
+
+ uart2 {
+ pinctrl_uart2_1: uart2grp-1 {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2_2: uart2grp-2 {
+ fsl,pins = <
+ MX6SX_PAD_SD1_DATA0__UART2_RX 0x1b0b1
+ MX6SX_PAD_SD1_DATA1__UART2_TX 0x1b0b1
+ >;
+ };
+ };
+
+ usdhc3 {
+ pinctrl_usdhc3_1: usdhc3grp-1 {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059
+ MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059
+ MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059
+ MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059
+ MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3_1_100mhz: usdhc3grp-1-100mhz {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9
+ MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9
+ MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9
+ MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9
+ MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc3_1_200mhz: usdhc3grp-1-200mhz {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9
+ MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9
+ MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9
+ MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9
+ MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9
+ >;
+ };
+
+ };
+
+ usdhc4 {
+ pinctrl_usdhc4_1: usdhc4grp-1 {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059
+ MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x17059
+ MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x17059
+ MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x17059
+ MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x17059
+ >;
+ };
+ };
+};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 2/2] ARM: dts: imx6sx: add initial imx6sx sdb support
[not found] ` <1392796432-19127-1-git-send-email-b20788-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
@ 2014-02-19 7:53 ` Anson Huang
0 siblings, 0 replies; 3+ messages in thread
From: Anson Huang @ 2014-02-19 7:53 UTC (permalink / raw)
To: shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Add initial imx6sx sdb board support with uart and usdhc enabled.
Signed-off-by: Anson Huang <b20788-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
arch/arm/boot/dts/imx6sx-sdb.dts | 41 ++++++++++++++++++++++++++++++++++++++
1 file changed, 41 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6sx-sdb.dts
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
new file mode 100644
index 0000000..3db4750
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "imx6sx.dtsi"
+
+/ {
+ model = "Freescale i.MX6 SoloX SDB Board";
+ compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_1>;
+ status = "okay";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4_1>;
+ bus-width = <8>;
+ non-removable;
+ no-1-8-v;
+ status = "okay";
+};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-02-19 7:53 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-02-19 7:53 [PATCH 1/2] ARM: dts: add device tree source for imx6sx SoC Anson Huang
[not found] ` <1392796432-19127-1-git-send-email-b20788-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2014-02-19 7:53 ` [PATCH 2/2] ARM: dts: imx6sx: add initial imx6sx sdb support Anson Huang
-- strict thread matches above, loose matches on Subject: below --
2014-02-19 7:47 [PATCH 1/2] ARM: dts: add device tree source for imx6sx SoC Anson Huang
[not found] ` <1392796036-19094-1-git-send-email-b20788-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2014-02-19 7:47 ` [PATCH 2/2] ARM: dts: imx6sx: add initial imx6sx sdb support Anson Huang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).