* [PATCH v5 2/5] Power: Reset: Generalize qnap-poweroff to work on Synology devices.
[not found] ` <1392814154-11284-1-git-send-email-klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
2014-02-19 12:49 ` [PATCH v5 1/5] DT: Vendor prefixes: Add ricoh, qnap, sii and synology klightspeed-aslSrjg9ejhWX4hkXwHRhw
@ 2014-02-19 12:49 ` klightspeed-aslSrjg9ejhWX4hkXwHRhw
2014-02-19 12:49 ` [PATCH v5 3/5] DT: i2c: Trivial: Add sii, s35390a, fix ricoh vendor prefix klightspeed-aslSrjg9ejhWX4hkXwHRhw
` (2 subsequent siblings)
4 siblings, 0 replies; 10+ messages in thread
From: klightspeed-aslSrjg9ejhWX4hkXwHRhw @ 2014-02-19 12:49 UTC (permalink / raw)
To: Andrew Lunn
Cc: Jason Cooper, Ian Campbell,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Ben Peddell,
devicetree-u79uwXL29TY76Z2rM5mHXA, Rob Herring, Pawel Moll,
Mark Rutland, Kumar Gala, Anton Vorontsov,
Dmitry Eremin-Solenikov, David Woodhouse
From: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
The Synology NAS devices use a very similar mechanism to QNAP NAS
devices to power off. Both send a single charactor command to a PIC,
over the second serial port. However the baud rate and the command
differ. Generalize the driver to support this.
Signed-off-by: Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
Signed-off-by: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
Acked-by: Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>
Cc: Anton Vorontsov <anton-9xeibp6oKSgdnm+yROfE0A@public.gmane.org>
Cc: Dmitry Eremin-Solenikov <dbaryshkov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: David Woodhouse <dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
---
.../bindings/power_supply/qnap-poweroff.txt | 5 ++-
drivers/power/reset/qnap-poweroff.c | 49 ++++++++++++++++------
2 files changed, 41 insertions(+), 13 deletions(-)
diff --git a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
index 0347d83..af25e77 100644
--- a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
+++ b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
@@ -6,8 +6,11 @@ Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the
microcontroller to turn the power off. This driver adds a handler to
pm_power_off which is called to turn the power off.
+Synology NAS devices use a similar scheme, but a different baud rate,
+9600, and a different character, '1'.
+
Required Properties:
-- compatible: Should be "qnap,power-off"
+- compatible: Should be "qnap,power-off" or "synology,power-off"
- reg: Address and length of the register set for UART1
- clocks: tclk clock
diff --git a/drivers/power/reset/qnap-poweroff.c b/drivers/power/reset/qnap-poweroff.c
index 37f56f7..a75db7f 100644
--- a/drivers/power/reset/qnap-poweroff.c
+++ b/drivers/power/reset/qnap-poweroff.c
@@ -1,5 +1,5 @@
/*
- * QNAP Turbo NAS Board power off
+ * QNAP Turbo NAS Board power off. Can also be used on Synology devices.
*
* Copyright (C) 2012 Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
*
@@ -25,17 +25,43 @@
#define UART1_REG(x) (base + ((UART_##x) << 2))
+struct power_off_cfg {
+ u32 baud;
+ char cmd;
+};
+
+static const struct power_off_cfg qnap_power_off_cfg = {
+ .baud = 19200,
+ .cmd = 'A',
+};
+
+static const struct power_off_cfg synology_power_off_cfg = {
+ .baud = 9600,
+ .cmd = '1',
+};
+
+static const struct of_device_id qnap_power_off_of_match_table[] = {
+ { .compatible = "qnap,power-off",
+ .data = &qnap_power_off_cfg,
+ },
+ { .compatible = "synology,power-off",
+ .data = &synology_power_off_cfg,
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table);
+
static void __iomem *base;
static unsigned long tclk;
+static const struct power_off_cfg *cfg;
static void qnap_power_off(void)
{
- /* 19200 baud divisor */
- const unsigned divisor = ((tclk + (8 * 19200)) / (16 * 19200));
+ const unsigned divisor = ((tclk + (8 * cfg->baud)) / (16 * cfg->baud));
pr_err("%s: triggering power-off...\n", __func__);
- /* hijack UART1 and reset into sane state (19200,8n1) */
+ /* hijack UART1 and reset into sane state */
writel(0x83, UART1_REG(LCR));
writel(divisor & 0xff, UART1_REG(DLL));
writel((divisor >> 8) & 0xff, UART1_REG(DLM));
@@ -44,16 +70,21 @@ static void qnap_power_off(void)
writel(0x00, UART1_REG(FCR));
writel(0x00, UART1_REG(MCR));
- /* send the power-off command 'A' to PIC */
- writel('A', UART1_REG(TX));
+ /* send the power-off command to PIC */
+ writel(cfg->cmd, UART1_REG(TX));
}
static int qnap_power_off_probe(struct platform_device *pdev)
{
+ struct device_node *np = pdev->dev.of_node;
struct resource *res;
struct clk *clk;
char symname[KSYM_NAME_LEN];
+ const struct of_device_id *match =
+ of_match_node(qnap_power_off_of_match_table, np);
+ cfg = match->data;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "Missing resource");
@@ -94,12 +125,6 @@ static int qnap_power_off_remove(struct platform_device *pdev)
return 0;
}
-static const struct of_device_id qnap_power_off_of_match_table[] = {
- { .compatible = "qnap,power-off", },
- {}
-};
-MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table);
-
static struct platform_driver qnap_power_off_driver = {
.probe = qnap_power_off_probe,
.remove = qnap_power_off_remove,
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH v5 5/5] ARM: Kirkwood: Add support for many Synology NAS devices
[not found] ` <1392814154-11284-1-git-send-email-klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
` (3 preceding siblings ...)
2014-02-19 12:49 ` [PATCH v5 4/5] ARM: Kirkwood: Fix qnap " klightspeed-aslSrjg9ejhWX4hkXwHRhw
@ 2014-02-19 12:49 ` klightspeed-aslSrjg9ejhWX4hkXwHRhw
4 siblings, 0 replies; 10+ messages in thread
From: klightspeed-aslSrjg9ejhWX4hkXwHRhw @ 2014-02-19 12:49 UTC (permalink / raw)
To: Andrew Lunn
Cc: Jason Cooper, Ian Campbell,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Ben Peddell,
devicetree-u79uwXL29TY76Z2rM5mHXA, Rob Herring, Pawel Moll,
Mark Rutland, Kumar Gala
From: "klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org" <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
Add device tree fragments and files to support many of the kirkwood
based Synology NAS devices. This is a modification of
Andrew Lunn's <andrew-g2DYL2Zd6BY@public.gmane.org> translation of the board setup file
maintained by Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
The Ricoh RS5C372 RTC was used in all 2009 units and some 2010 units.
All other Synology Kirkwood-based DiskStations and RackStations use
the Seiko S35390A RTC.
Most of the 1-bay and 2-bay units use the GPIOs that are multiplexed
with the built-in SATA interface activity/presence pins on mpp 20-23,
while the 4-bay units use ge01 and a PCIe SATA controller, and put the
software controlled HDD leds on mpp 36-43.
Most of the 6281 units with HDD power controls use mpp 29 and 31, while
most of the 6282 units with HDD power controls use mpp 30, 34, 44 and 45
and provide a model ID on mpp 28, 29, 46 and 47. Pre-2012 units and
most 4-bay units didn't have a separate power control for HDD1. These
power controls are presumably to limit startup current from the 12V
brick power supply.
Instead of using separate dtsi files in a synology directory, this
patch uses a single dtsi file containing all of the modules for
these boards, with all of the modules not common to all boards
disabled. The board dts files then enable the appropriate modules for
their boards.
Signed-off-by: Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
Tested-by: Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org> (ds211j)
---
v2:
Fix gpio's which should be gpo.
Rebase onto v3-14-rc1
Update RTC nodes with vendor name.
Update SPI flash node with vendor name.
Add a description of the lego
Use ricoy, i.e. the stock ticker
v3:
Merge Synology dtsi files into single dtsi file
v4:
Various minor fixes to synology dtsi file
---
arch/arm/boot/dts/Makefile | 15 +
arch/arm/boot/dts/kirkwood-ds109.dts | 41 ++
arch/arm/boot/dts/kirkwood-ds110jv10.dts | 41 ++
arch/arm/boot/dts/kirkwood-ds111.dts | 44 ++
arch/arm/boot/dts/kirkwood-ds112.dts | 48 ++
arch/arm/boot/dts/kirkwood-ds209.dts | 44 ++
arch/arm/boot/dts/kirkwood-ds210.dts | 46 ++
arch/arm/boot/dts/kirkwood-ds212.dts | 47 ++
arch/arm/boot/dts/kirkwood-ds212j.dts | 41 ++
arch/arm/boot/dts/kirkwood-ds409.dts | 48 ++
arch/arm/boot/dts/kirkwood-ds409slim.dts | 40 ++
arch/arm/boot/dts/kirkwood-ds411.dts | 52 ++
arch/arm/boot/dts/kirkwood-ds411j.dts | 48 ++
arch/arm/boot/dts/kirkwood-ds411slim.dts | 48 ++
arch/arm/boot/dts/kirkwood-rs212.dts | 48 ++
arch/arm/boot/dts/kirkwood-rs409.dts | 44 ++
arch/arm/boot/dts/kirkwood-rs411.dts | 44 ++
arch/arm/boot/dts/kirkwood-synology.dtsi | 871 +++++++++++++++++++++++++++++++
18 files changed, 1610 insertions(+)
create mode 100644 arch/arm/boot/dts/kirkwood-ds109.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds110jv10.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds111.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds112.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds209.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds210.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds212.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds212j.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds409.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds409slim.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds411.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds411j.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds411slim.dts
create mode 100644 arch/arm/boot/dts/kirkwood-rs212.dts
create mode 100644 arch/arm/boot/dts/kirkwood-rs409.dts
create mode 100644 arch/arm/boot/dts/kirkwood-rs411.dts
create mode 100644 arch/arm/boot/dts/kirkwood-synology.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 6d1e43d..e286abc 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -90,6 +90,18 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
kirkwood-dns325.dtb \
kirkwood-dockstar.dtb \
kirkwood-dreamplug.dtb \
+ kirkwood-ds109.dtb \
+ kirkwood-ds110jv10.dtb \
+ kirkwood-ds111.dtb \
+ kirkwood-ds209.dtb \
+ kirkwood-ds210.dtb \
+ kirkwood-ds212.dtb \
+ kirkwood-ds212j.dtb \
+ kirkwood-ds409.dtb \
+ kirkwood-ds409slim.dtb \
+ kirkwood-ds411.dtb \
+ kirkwood-ds411j.dtb \
+ kirkwood-ds411slim.dtb \
kirkwood-goflexnet.dtb \
kirkwood-guruplug-server-plus.dtb \
kirkwood-ib62x0.dtb \
@@ -112,6 +124,9 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
kirkwood-nsa310a.dtb \
kirkwood-openblocks_a6.dtb \
kirkwood-openblocks_a7.dtb \
+ kirkwood-rs212.dtb \
+ kirkwood-rs409.dtb \
+ kirkwood-rs411.dtb \
kirkwood-sheevaplug.dtb \
kirkwood-sheevaplug-esata.dtb \
kirkwood-topkick.dtb \
diff --git a/arch/arm/boot/dts/kirkwood-ds109.dts b/arch/arm/boot/dts/kirkwood-ds109.dts
new file mode 100644
index 0000000..772092c
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds109.dts
@@ -0,0 +1,41 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology DS109, DS110, DS110jv20";
+ compatible = "synology,ds109", "synology,ds110jv20",
+ "synology,ds110", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-150-32-35 {
+ status = "okay";
+ };
+
+ gpio-leds-hdd-21-1 {
+ status = "okay";
+ };
+};
+
+&rs5c372 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds110jv10.dts b/arch/arm/boot/dts/kirkwood-ds110jv10.dts
new file mode 100644
index 0000000..aabafbe
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds110jv10.dts
@@ -0,0 +1,41 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology DS110j v10 and v30";
+ compatible = "synology,ds110jv10", "synology,ds110jv30",
+ "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-150-32-35 {
+ status = "okay";
+ };
+
+ gpio-leds-hdd-21-1 {
+ status = "okay";
+ };
+};
+
+&s35390a {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds111.dts b/arch/arm/boot/dts/kirkwood-ds111.dts
new file mode 100644
index 0000000..16ec7fb
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds111.dts
@@ -0,0 +1,44 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology DS111";
+ compatible = "synology,ds111", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-100-15-35-1 {
+ status = "okay";
+ };
+
+ gpio-leds-hdd-21-1 {
+ status = "okay";
+ };
+};
+
+&s35390a {
+ status = "okay";
+};
+
+&pcie2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds112.dts b/arch/arm/boot/dts/kirkwood-ds112.dts
new file mode 100644
index 0000000..cff1b23
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds112.dts
@@ -0,0 +1,48 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology DS111";
+ compatible = "synology,ds111", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-100-15-35-1 {
+ status = "okay";
+ };
+
+ gpio-leds-21-2 {
+ status = "okay";
+ };
+
+ regulators-hdd-30 {
+ status = "okay";
+ };
+};
+
+&s35390a {
+ status = "okay";
+};
+
+&pcie2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds209.dts b/arch/arm/boot/dts/kirkwood-ds209.dts
new file mode 100644
index 0000000..3304119
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds209.dts
@@ -0,0 +1,44 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology DS209";
+ compatible = "synology,ds209", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-150-32-35 {
+ status = "okay";
+ };
+
+ gpio-leds-hdd-21-2 {
+ status = "okay";
+ };
+
+ regulators-hdd-31 {
+ status = "okay";
+ };
+};
+
+&rs5c372 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds210.dts b/arch/arm/boot/dts/kirkwood-ds210.dts
new file mode 100644
index 0000000..6052eaa
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds210.dts
@@ -0,0 +1,46 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology DS210 v10, v20, v30, DS211j";
+ compatible = "synology,ds210jv10", "synology,ds210jv20",
+ "synology,ds210jv30", "synology,ds211j",
+ "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-150-32-35 {
+ status = "okay";
+ };
+
+ gpio-leds-hdd-21-2 {
+ status = "okay";
+ };
+
+ regulators-hdd-31 {
+ status = "okay";
+ };
+};
+
+&s35390a {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds212.dts b/arch/arm/boot/dts/kirkwood-ds212.dts
new file mode 100644
index 0000000..7f76cd3
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds212.dts
@@ -0,0 +1,47 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology DS212, DS212p v10, v20, DS213air v10, DS213 v10";
+ compatible = "synology,ds212", "synology,ds212pv10",
+ "synology,ds212pv10", "synology,ds212pv20",
+ "synology,ds213airv10", "synology,ds213v10",
+ "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-100-15-35-1 {
+ status = "okay";
+ };
+
+ gpio-leds-hdd-21-2 {
+ status = "okay";
+ };
+};
+
+&s35390a {
+ status = "okay";
+};
+
+&pcie2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds212j.dts b/arch/arm/boot/dts/kirkwood-ds212j.dts
new file mode 100644
index 0000000..1f83a00
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds212j.dts
@@ -0,0 +1,41 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology DS212j v10, v20";
+ compatible = "synology,ds212jv10", "synology,ds212jv20",
+ "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-100-32-35 {
+ status = "okay";
+ };
+
+ gpio-leds-hdd-21-2 {
+ status = "okay";
+ };
+};
+
+&s35390a {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds409.dts b/arch/arm/boot/dts/kirkwood-ds409.dts
new file mode 100644
index 0000000..0a573ad
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds409.dts
@@ -0,0 +1,48 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology DS409, DS410j";
+ compatible = "synology,ds409", "synology,ds410j", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-150-15-18 {
+ status = "okay";
+ };
+
+ gpio-leds-hdd-36 {
+ status = "okay";
+ };
+
+ gpio-leds-alarm-12 {
+ status = "okay";
+ };
+};
+
+ð1 {
+ status = "okay";
+};
+
+&rs5c372 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds409slim.dts b/arch/arm/boot/dts/kirkwood-ds409slim.dts
new file mode 100644
index 0000000..1848a62
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds409slim.dts
@@ -0,0 +1,40 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology 409slim";
+ compatible = "synology,ds409slim", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-150-32-35 {
+ status = "okay";
+ };
+
+ gpio-leds-hdd-20 {
+ status = "okay";
+ };
+};
+
+&rs5c372 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds411.dts b/arch/arm/boot/dts/kirkwood-ds411.dts
new file mode 100644
index 0000000..a1737b4
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds411.dts
@@ -0,0 +1,52 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology DS411, DS413jv10";
+ compatible = "synology,ds411", "synology,ds413jv10", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-100-15-35-1 {
+ status = "okay";
+ };
+
+ gpio-leds-hdd-36 {
+ status = "okay";
+ };
+
+ regulators-hdd-34 {
+ status = "okay";
+ };
+};
+
+ð1 {
+ status = "okay";
+};
+
+&s35390a {
+ status = "okay";
+};
+
+&pcie2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds411j.dts b/arch/arm/boot/dts/kirkwood-ds411j.dts
new file mode 100644
index 0000000..0cde914
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds411j.dts
@@ -0,0 +1,48 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology DS411j";
+ compatible = "synology,ds411j", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-150-15-18 {
+ status = "okay";
+ };
+
+ gpio-leds-hdd-36 {
+ status = "okay";
+ };
+
+ gpio-leds-alarm-12 {
+ status = "okay";
+ };
+};
+
+ð1 {
+ status = "okay";
+};
+
+&s35390a {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds411slim.dts b/arch/arm/boot/dts/kirkwood-ds411slim.dts
new file mode 100644
index 0000000..aef0cad
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds411slim.dts
@@ -0,0 +1,48 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology DS411slim";
+ compatible = "synology,ds411slim", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-100-15-35-1 {
+ status = "okay";
+ };
+
+ gpio-leds-hdd-36 {
+ status = "okay";
+ };
+};
+
+ð1 {
+ status = "okay";
+};
+
+&s35390a {
+ status = "okay";
+};
+
+&pcie2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-rs212.dts b/arch/arm/boot/dts/kirkwood-rs212.dts
new file mode 100644
index 0000000..93ec3d0
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rs212.dts
@@ -0,0 +1,48 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology RS212";
+ compatible = "synology,rs212", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-100-15-35-3 {
+ status = "okay";
+ };
+
+ gpio-leds-hdd-38 {
+ status = "okay";
+ };
+
+ regulators-hdd-30-2 {
+ status = "okay";
+ };
+};
+
+&s35390a {
+ status = "okay";
+};
+
+&pcie2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-rs409.dts b/arch/arm/boot/dts/kirkwood-rs409.dts
new file mode 100644
index 0000000..311df4e
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rs409.dts
@@ -0,0 +1,44 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology RS409";
+ compatible = "synology,rs409", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-150-15-18 {
+ status = "okay";
+ };
+
+ gpio-leds-hdd-36 {
+ status = "okay";
+ };
+};
+
+ð1 {
+ status = "okay";
+};
+
+&rs5c372 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-rs411.dts b/arch/arm/boot/dts/kirkwood-rs411.dts
new file mode 100644
index 0000000..f90da85
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rs411.dts
@@ -0,0 +1,44 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology RS411 RS812";
+ compatible = "synology,rs411", "synology,rs812", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-100-15-35-3 {
+ status = "okay";
+ };
+
+ gpio-leds-hdd-36 {
+ status = "okay";
+ };
+};
+
+ð1 {
+ status = "okay";
+};
+
+&s35390a {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi
new file mode 100644
index 0000000..92b3177
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-synology.dtsi
@@ -0,0 +1,871 @@
+/*
+ * Nodes for Marvell 628x Synology devices
+ *
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ mbus {
+ pcie-controller {
+ status = "okay";
+
+ pcie@1,0 {
+ status = "okay";
+ };
+
+ pcie2: pcie@2,0 {
+ status = "disabled";
+ };
+ };
+ };
+
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+ pmx_alarmled_12: pmx-alarmled-12 {
+ marvell,pins = "mpp12";
+ marvell,function = "gpio";
+ };
+
+ pmx_fanctrl_15: pmx-fanctrl-15 {
+ marvell,pins = "mpp15";
+ marvell,function = "gpio";
+ };
+
+ pmx_fanctrl_16: pmx-fanctrl-16 {
+ marvell,pins = "mpp16";
+ marvell,function = "gpio";
+ };
+
+ pmx_fanctrl_17: pmx-fanctrl-17 {
+ marvell,pins = "mpp17";
+ marvell,function = "gpio";
+ };
+
+ pmx_fanalarm_18: pmx-fanalarm-18 {
+ marvell,pins = "mpp18";
+ marvell,function = "gpo";
+ };
+
+ pmx_hddled_20: pmx-hddled-20 {
+ marvell,pins = "mpp20";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_21: pmx-hddled-21 {
+ marvell,pins = "mpp21";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_22: pmx-hddled-22 {
+ marvell,pins = "mpp22";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_23: pmx-hddled-23 {
+ marvell,pins = "mpp23";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_24: pmx-hddled-24 {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_25: pmx-hddled-25 {
+ marvell,pins = "mpp25";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_26: pmx-hddled-26 {
+ marvell,pins = "mpp26";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_27: pmx-hddled-27 {
+ marvell,pins = "mpp27";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_28: pmx-hddled-28 {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+
+ pmx_hdd1_pwr_29: pmx-hdd1-pwr-29 {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+
+ pmx_hdd1_pwr_30: pmx-hdd-pwr-30 {
+ marvell,pins = "mpp30";
+ marvell,function = "gpio";
+ };
+
+ pmx_hdd2_pwr_31: pmx-hdd2-pwr-31 {
+ marvell,pins = "mpp31";
+ marvell,function = "gpio";
+ };
+
+ pmx_fanctrl_32: pmx-fanctrl-32 {
+ marvell,pins = "mpp32";
+ marvell,function = "gpio";
+ };
+
+ pmx_fanctrl_33: pmx-fanctrl-33 {
+ marvell,pins = "mpp33";
+ marvell,function = "gpo";
+ };
+
+ pmx_fanctrl_34: pmx-fanctrl-34 {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+
+ pmx_hdd2_pwr_34: pmx-hdd2-pwr-34 {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+
+ pmx_fanalarm_35: pmx-fanalarm-35 {
+ marvell,pins = "mpp35";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_36: pmx-hddled-36 {
+ marvell,pins = "mpp36";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_37: pmx-hddled-37 {
+ marvell,pins = "mpp37";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_38: pmx-hddled-38 {
+ marvell,pins = "mpp38";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_39: pmx-hddled-39 {
+ marvell,pins = "mpp39";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_40: pmx-hddled-40 {
+ marvell,pins = "mpp40";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_41: pmx-hddled-41 {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_42: pmx-hddled-42 {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_43: pmx-hddled-43 {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_44: pmx-hddled-44 {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_45: pmx-hddled-45 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+
+ pmx_hdd3_pwr_44: pmx-hdd3-pwr-44 {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+
+ pmx_hdd4_pwr_45: pmx-hdd4-pwr-45 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+
+ pmx_fanalarm_44: pmx-fanalarm-44 {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+
+ pmx_fanalarm_45: pmx-fanalarm-45 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ };
+
+ rtc@10300 {
+ status = "disabled";
+ };
+
+ spi@10600 {
+ status = "okay";
+ pinctrl-0 = <&pmx_spi>;
+ pinctrl-names = "default";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p80";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ mode = <0>;
+
+ partition@00000000 {
+ reg = <0x00000000 0x00080000>;
+ label = "RedBoot";
+ };
+
+ partition@00080000 {
+ reg = <0x00080000 0x00200000>;
+ label = "zImage";
+ };
+
+ partition@00280000 {
+ reg = <0x00280000 0x00140000>;
+ label = "rd.gz";
+ };
+
+ partition@003c0000 {
+ reg = <0x003c0000 0x00010000>;
+ label = "vendor";
+ };
+
+ partition@003d0000 {
+ reg = <0x003d0000 0x00020000>;
+ label = "RedBoot config";
+ };
+
+ partition@003f0000 {
+ reg = <0x003f0000 0x00010000>;
+ label = "FIS directory";
+ };
+ };
+ };
+
+ i2c@11000 {
+ status = "okay";
+ clock-frequency = <400000>;
+ pinctrl-0 = <&pmx_twsi0>;
+ pinctrl-names = "default";
+
+ rs5c372: rs5c372@32 {
+ status = "disabled";
+ compatible = "ricoy,rs5c372";
+ reg = <0x32>;
+ };
+
+ s35390a: s35390a@30 {
+ status = "disabled";
+ compatible = "ssi,s35390a";
+ reg = <0x30>;
+ };
+ };
+
+ serial@12000 {
+ status = "okay";
+ pinctrl-0 = <&pmx_uart0>;
+ pinctrl-names = "default";
+ };
+
+ serial@12100 {
+ status = "okay";
+ pinctrl-0 = <&pmx_uart1>;
+ pinctrl-names = "default";
+ };
+
+ poweroff@12100 {
+ compatible = "synology,power-off";
+ reg = <0x12100 0x100>;
+ clocks = <&gate_clk 7>;
+ };
+
+ sata@80000 {
+ pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+ pinctrl-names = "default";
+ status = "okay";
+ nr-ports = <2>;
+ };
+ };
+
+ gpio-fan-150-32-35 {
+ status = "disabled";
+ compatible = "gpio-fan";
+ pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
+ &pmx_fanalarm_35>;
+ pinctrl-names = "default";
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
+ &gpio1 1 GPIO_ACTIVE_HIGH
+ &gpio1 2 GPIO_ACTIVE_HIGH>;
+ gpio-fan,speed-map = < 0 0
+ 2200 1
+ 2500 2
+ 3000 4
+ 3300 3
+ 3700 5
+ 3800 6
+ 4200 7 >;
+ };
+
+ gpio-fan-150-15-18 {
+ status = "disabled";
+ compatible = "gpio-fan";
+ pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+ &pmx_fanalarm_18>;
+ pinctrl-names = "default";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+ &gpio0 16 GPIO_ACTIVE_HIGH
+ &gpio0 17 GPIO_ACTIVE_HIGH>;
+ alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+ gpio-fan,speed-map = < 0 0
+ 2200 1
+ 2500 2
+ 3000 4
+ 3300 3
+ 3700 5
+ 3800 6
+ 4200 7 >;
+ };
+
+ gpio-fan-100-32-35 {
+ status = "disabled";
+ compatible = "gpio-fan";
+ pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
+ &pmx_fanalarm_35>;
+ pinctrl-names = "default";
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
+ &gpio1 1 GPIO_ACTIVE_HIGH
+ &gpio1 2 GPIO_ACTIVE_HIGH>;
+ alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ gpio-fan,speed-map = < 0 0
+ 2500 1
+ 3100 2
+ 3800 3
+ 4600 4
+ 4800 5
+ 4900 6
+ 5000 7 >;
+ };
+
+ gpio-fan-100-15-18 {
+ status = "disabled";
+ compatible = "gpio-fan";
+ pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+ &pmx_fanalarm_18>;
+ pinctrl-names = "default";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+ &gpio0 16 GPIO_ACTIVE_HIGH
+ &gpio0 17 GPIO_ACTIVE_HIGH>;
+ alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+ gpio-fan,speed-map = < 0 0
+ 2500 1
+ 3100 2
+ 3800 3
+ 4600 4
+ 4800 5
+ 4900 6
+ 5000 7 >;
+ };
+
+ gpio-fan-100-15-35-1 {
+ status = "disabled";
+ compatible = "gpio-fan";
+ pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+ &pmx_fanalarm_35>;
+ pinctrl-names = "default";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+ &gpio0 16 GPIO_ACTIVE_HIGH
+ &gpio0 17 GPIO_ACTIVE_HIGH>;
+ alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ gpio-fan,speed-map = < 0 0
+ 2500 1
+ 3100 2
+ 3800 3
+ 4600 4
+ 4800 5
+ 4900 6
+ 5000 7 >;
+ };
+
+ gpio-fan-100-15-35-3 {
+ status = "disabled";
+ compatible = "gpio-fan";
+ pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+ &pmx_fanalarm_35 &pmx_fanalarm_44 &pmx_fanalarm_45>;
+ pinctrl-names = "default";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+ &gpio0 16 GPIO_ACTIVE_HIGH
+ &gpio0 17 GPIO_ACTIVE_HIGH>;
+ alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH
+ &gpio1 12 GPIO_ACTIVE_HIGH
+ &gpio1 13 GPIO_ACTIVE_HIGH>;
+ gpio-fan,speed-map = < 0 0
+ 2500 1
+ 3100 2
+ 3800 3
+ 4600 4
+ 4800 5
+ 4900 6
+ 5000 7 >;
+ };
+
+ gpio-leds-alarm-12 {
+ status = "disabled";
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_alarmled_12>;
+ pinctrl-names = "default";
+
+ hdd1-green {
+ label = "synology:alarm";
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds-hdd-20 {
+ status = "disabled";
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_hddled_20 &pmx_hddled_21 &pmx_hddled_22
+ &pmx_hddled_23 &pmx_hddled_24 &pmx_hddled_25
+ &pmx_hddled_26 &pmx_hddled_27>;
+ pinctrl-names = "default";
+
+ hdd1-green {
+ label = "synology:green:hdd1";
+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd1-amber {
+ label = "synology:amber:hdd1";
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd2-green {
+ label = "synology:green:hdd2";
+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd2-amber {
+ label = "synology:amber:hdd2";
+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd3-green {
+ label = "synology:green:hdd3";
+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd3-amber {
+ label = "synology:amber:hdd3";
+ gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd4-green {
+ label = "synology:green:hdd4";
+ gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd4-amber {
+ label = "synology:amber:hdd4";
+ gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds-hdd-21-1 {
+ status = "disabled";
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23>;
+ pinctrl-names = "default";
+
+ hdd1-green {
+ label = "synology:green:hdd1";
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd1-amber {
+ label = "synology:amber:hdd1";
+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds-hdd-21-2 {
+ status = "disabled";
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23 &pmx_hddled_20 &pmx_hddled_22>;
+ pinctrl-names = "default";
+
+ hdd1-green {
+ label = "synology:green:hdd1";
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd1-amber {
+ label = "synology:amber:hdd1";
+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd2-green {
+ label = "synology:green:hdd2";
+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd2-amber {
+ label = "synology:amber:hdd2";
+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds-hdd-36 {
+ status = "disabled";
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_hddled_36 &pmx_hddled_37 &pmx_hddled_38
+ &pmx_hddled_39 &pmx_hddled_40 &pmx_hddled_41
+ &pmx_hddled_42 &pmx_hddled_43 &pmx_hddled_44
+ &pmx_hddled_45>;
+ pinctrl-names = "default";
+
+ hdd1-green {
+ label = "synology:green:hdd1";
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd1-amber {
+ label = "synology:amber:hdd1";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd2-green {
+ label = "synology:green:hdd2";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd2-amber {
+ label = "synology:amber:hdd2";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd3-green {
+ label = "synology:green:hdd3";
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd3-amber {
+ label = "synology:amber:hdd3";
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd4-green {
+ label = "synology:green:hdd4";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd4-amber {
+ label = "synology:amber:hdd4";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd5-green {
+ label = "synology:green:hdd5";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd5-amber {
+ label = "synology:amber:hdd5";
+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds-hdd-38 {
+ status = "disabled";
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_hddled_38 &pmx_hddled_39 &pmx_hddled_36 &pmx_hddled_37>;
+ pinctrl-names = "default";
+
+ hdd1-green {
+ label = "synology:green:hdd1";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd1-amber {
+ label = "synology:amber:hdd1";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd2-green {
+ label = "synology:green:hdd2";
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd2-amber {
+ label = "synology:amber:hdd2";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ regulators-hdd-29 {
+ status = "disabled";
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_hdd1_pwr_29 &pmx_hdd2_pwr_31>;
+ pinctrl-names = "default";
+
+ regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "hdd1power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ };
+
+ regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "hdd2power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ regulators-hdd-30-1 {
+ status = "disabled";
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_hdd1_pwr_30>;
+ pinctrl-names = "default";
+
+ regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "hdd1power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ regulators-hdd-30-2 {
+ status = "disabled";
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34>;
+ pinctrl-names = "default";
+
+ regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "hdd1power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+ };
+
+ regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "hdd2power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ regulators-hdd-30-4 {
+ status = "disabled";
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34
+ &pmx_hdd3_pwr_44 &pmx_hdd4_pwr_45>;
+ pinctrl-names = "default";
+
+ regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "hdd1power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+ };
+
+ regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "hdd2power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "hdd3power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "hdd4power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ regulators-hdd-31 {
+ status = "disabled";
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_hdd2_pwr_31>;
+ pinctrl-names = "default";
+
+ regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "hdd2power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ regulators-hdd-34 {
+ status = "disabled";
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_hdd2_pwr_34 &pmx_hdd3_pwr_44
+ &pmx_hdd4_pwr_45>;
+ pinctrl-names = "default";
+
+ regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "hdd2power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "hdd3power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "hdd4power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ device_type = "ethernet-phy";
+ reg = <8>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ device_type = "ethernet-phy";
+ reg = <9>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ ethernet0-port@0 {
+ phy-handle = <ðphy0>;
+ };
+};
+
+ð1 {
+ status = "disabled";
+
+ ethernet1-port@0 {
+ phy-handle = <ðphy1>;
+ };
+};
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 10+ messages in thread