[PATCH v5 0/5] DT support for kirkwood based Synology NAS boxes

[PATCH v5 0/5] DT support for kirkwood based Synology NAS boxes

[klightspeed-aslSrjg9ejhWX4hkXwHRhw]

This patchset adds support for around 30 kirkwood bases Synology NAS
boxes. Patch #1 documents vendor prefixes. Patch #2 generalizes the qnap
power off driver so that it can also be used for Synology devices.
Patch #3 and #4 fix i2c trivial device and qnap vendor prefixes.
Patch #5 adds the synology DT files.

v2:
Typo fix in qnap-poweroff.c
Use ricoy stock ticker instead of ricoh
Describe the lego structure of the hardware

v3:
Merge synology dtsi files into a single dtsi file

v4:
Various minor fixes to synology dtsi file

v5:
Fix typos in commit messages
Remove unnecessary casts in qnap-poweroff.c
Fix qnap vendor prefix

Andrew Lunn (3):
  DT: Vendor prefixes: Add ricoh, qnap, sii and synology
  Power: Reset: Generalize qnap-poweroff to work on Synology devices.
  DT: i2c: Trivial: Add sii, s35390a, fix ricoh vendor prefix

Ben Peddell (2):
  ARM: Kirkwood: Fix qnap vendor prefix
  ARM: Kirkwood: Add support for many Synology NAS devices

 .../devicetree/bindings/i2c/trivial-devices.txt    |   3 +-
 .../bindings/power_supply/qnap-poweroff.txt        |   5 +-
 .../devicetree/bindings/vendor-prefixes.txt        |   4 +
 arch/arm/boot/dts/Makefile                         |  15 +
 arch/arm/boot/dts/kirkwood-ds109.dts               |  41 +
 arch/arm/boot/dts/kirkwood-ds110jv10.dts           |  41 +
 arch/arm/boot/dts/kirkwood-ds111.dts               |  44 ++
 arch/arm/boot/dts/kirkwood-ds112.dts               |  48 ++
 arch/arm/boot/dts/kirkwood-ds209.dts               |  44 ++
 arch/arm/boot/dts/kirkwood-ds210.dts               |  46 ++
 arch/arm/boot/dts/kirkwood-ds212.dts               |  47 ++
 arch/arm/boot/dts/kirkwood-ds212j.dts              |  41 +
 arch/arm/boot/dts/kirkwood-ds409.dts               |  48 ++
 arch/arm/boot/dts/kirkwood-ds409slim.dts           |  40 +
 arch/arm/boot/dts/kirkwood-ds411.dts               |  52 ++
 arch/arm/boot/dts/kirkwood-ds411j.dts              |  48 ++
 arch/arm/boot/dts/kirkwood-ds411slim.dts           |  48 ++
 arch/arm/boot/dts/kirkwood-rs212.dts               |  48 ++
 arch/arm/boot/dts/kirkwood-rs409.dts               |  44 ++
 arch/arm/boot/dts/kirkwood-rs411.dts               |  44 ++
 arch/arm/boot/dts/kirkwood-synology.dtsi           | 871 +++++++++++++++++++++
 arch/arm/boot/dts/kirkwood-ts219.dtsi              |   4 +-
 drivers/power/reset/qnap-poweroff.c                |  49 +-
 23 files changed, 1659 insertions(+), 16 deletions(-)
 create mode 100644 arch/arm/boot/dts/kirkwood-ds109.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds110jv10.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds111.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds112.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds209.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds210.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds212.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds212j.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds409.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds409slim.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds411.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds411j.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds411slim.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-rs212.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-rs409.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-rs411.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-synology.dtsi

-- 
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v5 1/5] DT: Vendor prefixes: Add ricoh, qnap, sii and synology

[klightspeed-aslSrjg9ejhWX4hkXwHRhw]

From: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>

The following patches make use of vendor names:
* ricoy (Ricoh Co. Ltd.);
* qnapsz (QNAP Systems, Inc.);
* sii (Seiko Instruments, Inc.); and
* synology (Synology, Inc.)

Add them to the vendor prefix list.

Signed-off-by: Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
Signed-off-by: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
Acked-by: Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>
---
v2:
Use stock ticker for Ricoh as vendor name
s/Richoh/Ricoh/

v5:
Add vendor prefix for QNAP
---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 40ce2df..ef1b77c 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -68,10 +68,12 @@ picochip	Picochip Ltd
 powervr	PowerVR (deprecated, use img)
 qca	Qualcomm Atheros, Inc.
 qcom	Qualcomm Technologies, Inc
+qnapsz	QNAP Systems, Inc.
 ralink	Mediatek/Ralink Technology Corp.
 ramtron	Ramtron International
 realtek Realtek Semiconductor Corp.
 renesas	Renesas Electronics Corporation
+ricoy	Ricoh Co. Ltd.
 rockchip	Fuzhou Rockchip Electronics Co., Ltd
 samsung	Samsung Semiconductor
 sbs	Smart Battery System
@@ -79,12 +81,14 @@ schindler	Schindler
 sil	Silicon Image
 silabs	Silicon Laboratories
 simtek
+sii	Seiko Instruments, Inc.
 sirf	SiRF Technology, Inc.
 snps 	Synopsys, Inc.
 spansion	Spansion Inc.
 st	STMicroelectronics
 ste	ST-Ericsson
 stericsson	ST-Ericsson
+synology	Synology, Inc.
 ti	Texas Instruments
 tlm	Trusted Logic Mobility
 toshiba	Toshiba Corporation
-- 
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v5 2/5] Power: Reset: Generalize qnap-poweroff to work on Synology devices.

[klightspeed-aslSrjg9ejhWX4hkXwHRhw]

From: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>

The Synology NAS devices use a very similar mechanism to QNAP NAS
devices to power off. Both send a single charactor command to a PIC,
over the second serial port. However the baud rate and the command
differ. Generalize the driver to support this.

Signed-off-by: Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
Signed-off-by: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
Acked-by: Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>
Cc: Anton Vorontsov <anton-9xeibp6oKSgdnm+yROfE0A@public.gmane.org>
Cc: Dmitry Eremin-Solenikov <dbaryshkov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: David Woodhouse <dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
---
 .../bindings/power_supply/qnap-poweroff.txt        |  5 ++-
 drivers/power/reset/qnap-poweroff.c                | 49 ++++++++++++++++------
 2 files changed, 41 insertions(+), 13 deletions(-)

diff --git a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
index 0347d83..af25e77 100644
--- a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
+++ b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
@@ -6,8 +6,11 @@ Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the
 microcontroller to turn the power off. This driver adds a handler to
 pm_power_off which is called to turn the power off.
 
+Synology NAS devices use a similar scheme, but a different baud rate,
+9600, and a different character, '1'.
+
 Required Properties:
-- compatible: Should be "qnap,power-off"
+- compatible: Should be "qnap,power-off" or "synology,power-off"
 
 - reg: Address and length of the register set for UART1
 - clocks: tclk clock
diff --git a/drivers/power/reset/qnap-poweroff.c b/drivers/power/reset/qnap-poweroff.c
index 37f56f7..a75db7f 100644
--- a/drivers/power/reset/qnap-poweroff.c
+++ b/drivers/power/reset/qnap-poweroff.c
@@ -1,5 +1,5 @@
 /*
- * QNAP Turbo NAS Board power off
+ * QNAP Turbo NAS Board power off. Can also be used on Synology devices.
  *
  * Copyright (C) 2012 Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
  *
@@ -25,17 +25,43 @@
 
 #define UART1_REG(x)	(base + ((UART_##x) << 2))
 
+struct power_off_cfg {
+	u32 baud;
+	char cmd;
+};
+
+static const struct power_off_cfg qnap_power_off_cfg = {
+	.baud = 19200,
+	.cmd = 'A',
+};
+
+static const struct power_off_cfg synology_power_off_cfg = {
+	.baud = 9600,
+	.cmd = '1',
+};
+
+static const struct of_device_id qnap_power_off_of_match_table[] = {
+	{ .compatible = "qnap,power-off",
+	  .data = &qnap_power_off_cfg,
+	},
+	{ .compatible = "synology,power-off",
+	  .data = &synology_power_off_cfg,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table);
+
 static void __iomem *base;
 static unsigned long tclk;
+static const struct power_off_cfg *cfg;
 
 static void qnap_power_off(void)
 {
-	/* 19200 baud divisor */
-	const unsigned divisor = ((tclk + (8 * 19200)) / (16 * 19200));
+	const unsigned divisor = ((tclk + (8 * cfg->baud)) / (16 * cfg->baud));
 
 	pr_err("%s: triggering power-off...\n", __func__);
 
-	/* hijack UART1 and reset into sane state (19200,8n1) */
+	/* hijack UART1 and reset into sane state */
 	writel(0x83, UART1_REG(LCR));
 	writel(divisor & 0xff, UART1_REG(DLL));
 	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
@@ -44,16 +70,21 @@ static void qnap_power_off(void)
 	writel(0x00, UART1_REG(FCR));
 	writel(0x00, UART1_REG(MCR));
 
-	/* send the power-off command 'A' to PIC */
-	writel('A', UART1_REG(TX));
+	/* send the power-off command to PIC */
+	writel(cfg->cmd, UART1_REG(TX));
 }
 
 static int qnap_power_off_probe(struct platform_device *pdev)
 {
+	struct device_node *np = pdev->dev.of_node;
 	struct resource *res;
 	struct clk *clk;
 	char symname[KSYM_NAME_LEN];
 
+	const struct of_device_id *match =
+		of_match_node(qnap_power_off_of_match_table, np);
+	cfg = match->data;
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(&pdev->dev, "Missing resource");
@@ -94,12 +125,6 @@ static int qnap_power_off_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id qnap_power_off_of_match_table[] = {
-	{ .compatible = "qnap,power-off", },
-	{}
-};
-MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table);
-
 static struct platform_driver qnap_power_off_driver = {
 	.probe	= qnap_power_off_probe,
 	.remove	= qnap_power_off_remove,
-- 
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v5 3/5] DT: i2c: Trivial: Add sii, s35390a, fix ricoh vendor prefix

[klightspeed-aslSrjg9ejhWX4hkXwHRhw]

From: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>

Add the Seiko Instruments Inc S35390a to the list of trivial i2c
devices. At the same time, correct the vendor prefix for ricoh, which
should be the ticker symbol ricoy.

Signed-off-by: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
Acked-by: Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>
---
 Documentation/devicetree/bindings/i2c/trivial-devices.txt | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index 1a1ac2e..5f37191 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -56,8 +56,9 @@ ovti,ov5642		OV5642: Color CMOS QSXGA (5-megapixel) Image Sensor with OmniBSI an
 pericom,pt7c4338	Real-time Clock Module
 plx,pex8648		48-Lane, 12-Port PCI Express Gen 2 (5.0 GT/s) Switch
 ramtron,24c64		i2c serial eeprom  (24cxx)
-ricoh,rs5c372a		I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
+ricoy,rs5c372a		I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
 samsung,24ad0xd1	S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power)
+sii,s35390a		2-wire CMOS real-time clock
 st-micro,24c256		i2c serial eeprom  (24cxx)
 stm,m41t00		Serial Access TIMEKEEPER
 stm,m41t62		Serial real-time clock (RTC) with alarm
-- 
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v5 4/5] ARM: Kirkwood: Fix qnap vendor prefix

[klightspeed-aslSrjg9ejhWX4hkXwHRhw]

Correct the vendor prefix for qnap, which should be the stock ticker
symbol qnapsz.

Signed-off-by: Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
Cc: Anton Vorontsov <anton-9xeibp6oKSgdnm+yROfE0A@public.gmane.org>
Cc: Dmitry Eremin-Solenikov <dbaryshkov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: David Woodhouse <dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
---
 Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt | 2 +-
 arch/arm/boot/dts/kirkwood-ts219.dtsi                            | 4 ++--
 drivers/power/reset/qnap-poweroff.c                              | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
index af25e77..aabda51 100644
--- a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
+++ b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
@@ -10,7 +10,7 @@ Synology NAS devices use a similar scheme, but a different baud rate,
 9600, and a different character, '1'.
 
 Required Properties:
-- compatible: Should be "qnap,power-off" or "synology,power-off"
+- compatible: Should be "qnapsz,power-off" or "synology,power-off"
 
 - reg: Address and length of the register set for UART1
 - clocks: tclk clock
diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
index 911f3a8..0f0892a 100644
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -1,6 +1,6 @@
 / {
 	model = "QNAP TS219 family";
-	compatible = "qnap,ts219", "marvell,kirkwood";
+	compatible = "qnapsz,ts219", "marvell,kirkwood";
 
 	memory {
 		device_type = "memory";
@@ -46,7 +46,7 @@
 			pinctrl-names = "default";
 		};
 		poweroff@12100 {
-			compatible = "qnap,power-off";
+			compatible = "qnapsz,power-off";
 			reg = <0x12000 0x100>;
 			clocks = <&gate_clk 7>;
 		};
diff --git a/drivers/power/reset/qnap-poweroff.c b/drivers/power/reset/qnap-poweroff.c
index a75db7f..d350ece 100644
--- a/drivers/power/reset/qnap-poweroff.c
+++ b/drivers/power/reset/qnap-poweroff.c
@@ -41,7 +41,7 @@ static const struct power_off_cfg synology_power_off_cfg = {
 };
 
 static const struct of_device_id qnap_power_off_of_match_table[] = {
-	{ .compatible = "qnap,power-off",
+	{ .compatible = "qnapsz,power-off",
 	  .data = &qnap_power_off_cfg,
 	},
 	{ .compatible = "synology,power-off",
-- 
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v5 5/5] ARM: Kirkwood: Add support for many Synology NAS devices

[klightspeed-aslSrjg9ejhWX4hkXwHRhw]

From: "klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org" <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>

Add device tree fragments and files to support many of the kirkwood
based Synology NAS devices. This is a modification of
Andrew Lunn's <andrew-g2DYL2Zd6BY@public.gmane.org> translation of the board setup file
maintained by Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>

The Ricoh RS5C372 RTC was used in all 2009 units and some 2010 units.
All other Synology Kirkwood-based DiskStations and RackStations use
the Seiko S35390A RTC.

Most of the 1-bay and 2-bay units use the GPIOs that are multiplexed
with the built-in SATA interface activity/presence pins on mpp 20-23,
while the 4-bay units use ge01 and a PCIe SATA controller, and put the
software controlled HDD leds on mpp 36-43.

Most of the 6281 units with HDD power controls use mpp 29 and 31, while
most of the 6282 units with HDD power controls use mpp 30, 34, 44 and 45
and provide a model ID on mpp 28, 29, 46 and 47.  Pre-2012 units and
most 4-bay units didn't have a separate power control for HDD1.  These
power controls are presumably to limit startup current from the 12V
brick power supply.

Instead of using separate dtsi files in a synology directory, this
patch uses a single dtsi file containing all of the modules for
these boards, with all of the modules not common to all boards
disabled.  The board dts files then enable the appropriate modules for
their boards.

Signed-off-by: Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
Tested-by: Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org> (ds211j)
---
v2:
Fix gpio's which should be gpo.
Rebase onto v3-14-rc1
Update RTC nodes with vendor name.
Update SPI flash node with vendor name.
Add a description of the lego
Use ricoy, i.e. the stock ticker

v3:
Merge Synology dtsi files into single dtsi file

v4:
Various minor fixes to synology dtsi file
---
 arch/arm/boot/dts/Makefile               |  15 +
 arch/arm/boot/dts/kirkwood-ds109.dts     |  41 ++
 arch/arm/boot/dts/kirkwood-ds110jv10.dts |  41 ++
 arch/arm/boot/dts/kirkwood-ds111.dts     |  44 ++
 arch/arm/boot/dts/kirkwood-ds112.dts     |  48 ++
 arch/arm/boot/dts/kirkwood-ds209.dts     |  44 ++
 arch/arm/boot/dts/kirkwood-ds210.dts     |  46 ++
 arch/arm/boot/dts/kirkwood-ds212.dts     |  47 ++
 arch/arm/boot/dts/kirkwood-ds212j.dts    |  41 ++
 arch/arm/boot/dts/kirkwood-ds409.dts     |  48 ++
 arch/arm/boot/dts/kirkwood-ds409slim.dts |  40 ++
 arch/arm/boot/dts/kirkwood-ds411.dts     |  52 ++
 arch/arm/boot/dts/kirkwood-ds411j.dts    |  48 ++
 arch/arm/boot/dts/kirkwood-ds411slim.dts |  48 ++
 arch/arm/boot/dts/kirkwood-rs212.dts     |  48 ++
 arch/arm/boot/dts/kirkwood-rs409.dts     |  44 ++
 arch/arm/boot/dts/kirkwood-rs411.dts     |  44 ++
 arch/arm/boot/dts/kirkwood-synology.dtsi | 871 +++++++++++++++++++++++++++++++
 18 files changed, 1610 insertions(+)
 create mode 100644 arch/arm/boot/dts/kirkwood-ds109.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds110jv10.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds111.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds112.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds209.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds210.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds212.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds212j.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds409.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds409slim.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds411.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds411j.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds411slim.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-rs212.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-rs409.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-rs411.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-synology.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 6d1e43d..e286abc 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -90,6 +90,18 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
 	kirkwood-dns325.dtb \
 	kirkwood-dockstar.dtb \
 	kirkwood-dreamplug.dtb \
+	kirkwood-ds109.dtb \
+	kirkwood-ds110jv10.dtb \
+	kirkwood-ds111.dtb \
+	kirkwood-ds209.dtb \
+	kirkwood-ds210.dtb \
+	kirkwood-ds212.dtb \
+	kirkwood-ds212j.dtb \
+	kirkwood-ds409.dtb \
+	kirkwood-ds409slim.dtb \
+	kirkwood-ds411.dtb \
+	kirkwood-ds411j.dtb \
+	kirkwood-ds411slim.dtb \
 	kirkwood-goflexnet.dtb \
 	kirkwood-guruplug-server-plus.dtb \
 	kirkwood-ib62x0.dtb \
@@ -112,6 +124,9 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
 	kirkwood-nsa310a.dtb \
 	kirkwood-openblocks_a6.dtb \
 	kirkwood-openblocks_a7.dtb \
+	kirkwood-rs212.dtb \
+	kirkwood-rs409.dtb \
+	kirkwood-rs411.dtb \
 	kirkwood-sheevaplug.dtb \
 	kirkwood-sheevaplug-esata.dtb \
 	kirkwood-topkick.dtb \
diff --git a/arch/arm/boot/dts/kirkwood-ds109.dts b/arch/arm/boot/dts/kirkwood-ds109.dts
new file mode 100644
index 0000000..772092c
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds109.dts
@@ -0,0 +1,41 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS109, DS110, DS110jv20";
+	compatible = "synology,ds109", "synology,ds110jv20",
+		     "synology,ds110", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-1 {
+		status = "okay";
+	};
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds110jv10.dts b/arch/arm/boot/dts/kirkwood-ds110jv10.dts
new file mode 100644
index 0000000..aabafbe
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds110jv10.dts
@@ -0,0 +1,41 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS110j v10 and v30";
+	compatible = "synology,ds110jv10", "synology,ds110jv30",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-1 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds111.dts b/arch/arm/boot/dts/kirkwood-ds111.dts
new file mode 100644
index 0000000..16ec7fb
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds111.dts
@@ -0,0 +1,44 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS111";
+	compatible = "synology,ds111", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-1 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds112.dts b/arch/arm/boot/dts/kirkwood-ds112.dts
new file mode 100644
index 0000000..cff1b23
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds112.dts
@@ -0,0 +1,48 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS111";
+	compatible = "synology,ds111", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-21-2 {
+		status = "okay";
+	};
+
+	regulators-hdd-30 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds209.dts b/arch/arm/boot/dts/kirkwood-ds209.dts
new file mode 100644
index 0000000..3304119
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds209.dts
@@ -0,0 +1,44 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS209";
+	compatible = "synology,ds209", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "okay";
+	};
+
+	regulators-hdd-31 {
+		status = "okay";
+	};
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds210.dts b/arch/arm/boot/dts/kirkwood-ds210.dts
new file mode 100644
index 0000000..6052eaa
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds210.dts
@@ -0,0 +1,46 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS210 v10, v20, v30, DS211j";
+	compatible = "synology,ds210jv10", "synology,ds210jv20",
+		     "synology,ds210jv30", "synology,ds211j",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "okay";
+	};
+
+	regulators-hdd-31 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds212.dts b/arch/arm/boot/dts/kirkwood-ds212.dts
new file mode 100644
index 0000000..7f76cd3
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds212.dts
@@ -0,0 +1,47 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS212, DS212p v10, v20, DS213air v10, DS213 v10";
+	compatible = "synology,ds212", "synology,ds212pv10",
+		     "synology,ds212pv10", "synology,ds212pv20",
+		     "synology,ds213airv10", "synology,ds213v10",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds212j.dts b/arch/arm/boot/dts/kirkwood-ds212j.dts
new file mode 100644
index 0000000..1f83a00
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds212j.dts
@@ -0,0 +1,41 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS212j v10, v20";
+	compatible = "synology,ds212jv10", "synology,ds212jv20",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-100-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds409.dts b/arch/arm/boot/dts/kirkwood-ds409.dts
new file mode 100644
index 0000000..0a573ad
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds409.dts
@@ -0,0 +1,48 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS409, DS410j";
+	compatible = "synology,ds409", "synology,ds410j", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-150-15-18 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+
+	gpio-leds-alarm-12 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds409slim.dts b/arch/arm/boot/dts/kirkwood-ds409slim.dts
new file mode 100644
index 0000000..1848a62
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds409slim.dts
@@ -0,0 +1,40 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology 409slim";
+	compatible = "synology,ds409slim", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-20 {
+		status = "okay";
+	};
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds411.dts b/arch/arm/boot/dts/kirkwood-ds411.dts
new file mode 100644
index 0000000..a1737b4
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds411.dts
@@ -0,0 +1,52 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS411, DS413jv10";
+	compatible = "synology,ds411", "synology,ds413jv10", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+
+	regulators-hdd-34 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds411j.dts b/arch/arm/boot/dts/kirkwood-ds411j.dts
new file mode 100644
index 0000000..0cde914
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds411j.dts
@@ -0,0 +1,48 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS411j";
+	compatible = "synology,ds411j", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-150-15-18 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+
+	gpio-leds-alarm-12 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&s35390a {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds411slim.dts b/arch/arm/boot/dts/kirkwood-ds411slim.dts
new file mode 100644
index 0000000..aef0cad
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds411slim.dts
@@ -0,0 +1,48 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS411slim";
+	compatible = "synology,ds411slim", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-rs212.dts b/arch/arm/boot/dts/kirkwood-rs212.dts
new file mode 100644
index 0000000..93ec3d0
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rs212.dts
@@ -0,0 +1,48 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology RS212";
+	compatible = "synology,rs212", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-100-15-35-3 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-38 {
+		status = "okay";
+	};
+
+	regulators-hdd-30-2 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-rs409.dts b/arch/arm/boot/dts/kirkwood-rs409.dts
new file mode 100644
index 0000000..311df4e
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rs409.dts
@@ -0,0 +1,44 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology RS409";
+	compatible = "synology,rs409", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-150-15-18 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-rs411.dts b/arch/arm/boot/dts/kirkwood-rs411.dts
new file mode 100644
index 0000000..f90da85
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rs411.dts
@@ -0,0 +1,44 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology RS411 RS812";
+	compatible = "synology,rs411", "synology,rs812", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-100-15-35-3 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&s35390a {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi
new file mode 100644
index 0000000..92b3177
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-synology.dtsi
@@ -0,0 +1,871 @@
+/*
+ * Nodes for Marvell 628x Synology devices
+ *
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ * Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+
+			pcie2: pcie@2,0 {
+				status = "disabled";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+			pmx_alarmled_12: pmx-alarmled-12 {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_15: pmx-fanctrl-15 {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_16: pmx-fanctrl-16 {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_17: pmx-fanctrl-17 {
+				marvell,pins = "mpp17";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_18: pmx-fanalarm-18 {
+				marvell,pins = "mpp18";
+				marvell,function = "gpo";
+			};
+
+			pmx_hddled_20: pmx-hddled-20 {
+				marvell,pins = "mpp20";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_21: pmx-hddled-21 {
+				marvell,pins = "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_22: pmx-hddled-22 {
+				marvell,pins = "mpp22";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_23: pmx-hddled-23 {
+				marvell,pins = "mpp23";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_24: pmx-hddled-24 {
+				marvell,pins = "mpp24";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_25: pmx-hddled-25 {
+				marvell,pins = "mpp25";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_26: pmx-hddled-26 {
+				marvell,pins = "mpp26";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_27: pmx-hddled-27 {
+				marvell,pins = "mpp27";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_28: pmx-hddled-28 {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd1_pwr_29: pmx-hdd1-pwr-29 {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd1_pwr_30: pmx-hdd-pwr-30 {
+				marvell,pins = "mpp30";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd2_pwr_31: pmx-hdd2-pwr-31 {
+				marvell,pins = "mpp31";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_32: pmx-fanctrl-32 {
+				marvell,pins = "mpp32";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_33: pmx-fanctrl-33 {
+				marvell,pins = "mpp33";
+				marvell,function = "gpo";
+			};
+
+			pmx_fanctrl_34: pmx-fanctrl-34 {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd2_pwr_34: pmx-hdd2-pwr-34 {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_35: pmx-fanalarm-35 {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_36: pmx-hddled-36 {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_37: pmx-hddled-37 {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_38: pmx-hddled-38 {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_39: pmx-hddled-39 {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_40: pmx-hddled-40 {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_41: pmx-hddled-41 {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_42: pmx-hddled-42 {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_43: pmx-hddled-43 {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_44: pmx-hddled-44 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_45: pmx-hddled-45 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd3_pwr_44: pmx-hdd3-pwr-44 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd4_pwr_45: pmx-hdd4-pwr-45 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_44: pmx-fanalarm-44 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_45: pmx-fanalarm-45 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+		};
+
+		rtc@10300 {
+			status = "disabled";
+		};
+
+		spi@10600 {
+			status = "okay";
+			pinctrl-0 = <&pmx_spi>;
+			pinctrl-names = "default";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p80";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+
+				partition@00000000 {
+					reg = <0x00000000 0x00080000>;
+					label = "RedBoot";
+				};
+
+				partition@00080000 {
+					reg = <0x00080000 0x00200000>;
+					label = "zImage";
+				};
+
+				partition@00280000 {
+					reg = <0x00280000 0x00140000>;
+					label = "rd.gz";
+				};
+
+				partition@003c0000 {
+					reg = <0x003c0000 0x00010000>;
+					label = "vendor";
+				};
+
+				partition@003d0000 {
+					reg = <0x003d0000 0x00020000>;
+					label = "RedBoot config";
+				};
+
+				partition@003f0000 {
+					reg = <0x003f0000 0x00010000>;
+					label = "FIS directory";
+				};
+			};
+		};
+
+		i2c@11000 {
+			status = "okay";
+			clock-frequency = <400000>;
+			pinctrl-0 = <&pmx_twsi0>;
+			pinctrl-names = "default";
+
+			rs5c372: rs5c372@32 {
+				status = "disabled";
+				compatible = "ricoy,rs5c372";
+				reg = <0x32>;
+			};
+
+			s35390a: s35390a@30 {
+				status = "disabled";
+				compatible = "ssi,s35390a";
+				reg = <0x30>;
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+			pinctrl-0 = <&pmx_uart0>;
+			pinctrl-names = "default";
+		};
+
+		serial@12100 {
+			status = "okay";
+			pinctrl-0 = <&pmx_uart1>;
+			pinctrl-names = "default";
+		};
+
+		poweroff@12100 {
+			compatible = "synology,power-off";
+			reg = <0x12100 0x100>;
+			clocks = <&gate_clk 7>;
+		};
+
+		sata@80000 {
+			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio-fan-150-32-35 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
+		             &pmx_fanalarm_35>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
+			 &gpio1 1 GPIO_ACTIVE_HIGH
+			 &gpio1 2 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2200 1
+				       2500 2
+				       3000 4
+				       3300 3
+				       3700 5
+				       3800 6
+				       4200 7 >;
+	};
+
+	gpio-fan-150-15-18 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_18>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2200 1
+				       2500 2
+				       3000 4
+				       3300 3
+				       3700 5
+				       3800 6
+				       4200 7 >;
+	};
+
+	gpio-fan-100-32-35 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
+		             &pmx_fanalarm_35>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
+			 &gpio1 1 GPIO_ACTIVE_HIGH
+			 &gpio1 2 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-fan-100-15-18 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_18>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_35>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-fan-100-15-35-3 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_35 &pmx_fanalarm_44 &pmx_fanalarm_45>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH
+			       &gpio1 12 GPIO_ACTIVE_HIGH
+			       &gpio1 13 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-leds-alarm-12 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_alarmled_12>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:alarm";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-20 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_20 &pmx_hddled_21 &pmx_hddled_22
+			     &pmx_hddled_23 &pmx_hddled_24 &pmx_hddled_25
+			     &pmx_hddled_26 &pmx_hddled_27>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-green {
+			label = "synology:green:hdd3";
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-amber {
+			label = "synology:amber:hdd3";
+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-green {
+			label = "synology:green:hdd4";
+			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-amber {
+			label = "synology:amber:hdd4";
+			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-21-1 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23 &pmx_hddled_20 &pmx_hddled_22>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-36 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_36 &pmx_hddled_37 &pmx_hddled_38
+			     &pmx_hddled_39 &pmx_hddled_40 &pmx_hddled_41
+			     &pmx_hddled_42 &pmx_hddled_43 &pmx_hddled_44
+			     &pmx_hddled_45>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-green {
+			label = "synology:green:hdd3";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-amber {
+			label = "synology:amber:hdd3";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-green {
+			label = "synology:green:hdd4";
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-amber {
+			label = "synology:amber:hdd4";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd5-green {
+			label = "synology:green:hdd5";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd5-amber {
+			label = "synology:amber:hdd5";
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-38 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_38 &pmx_hddled_39 &pmx_hddled_36 &pmx_hddled_37>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	regulators-hdd-29 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_29 &pmx_hdd2_pwr_31>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-30-1 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_30>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-30-2 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-30-4 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34
+			     &pmx_hdd3_pwr_44 &pmx_hdd4_pwr_45>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "hdd3power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "hdd4power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-31 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd2_pwr_31>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-34 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd2_pwr_34 &pmx_hdd3_pwr_44
+			     &pmx_hdd4_pwr_45>;
+		pinctrl-names = "default";
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "hdd3power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "hdd4power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		device_type = "ethernet-phy";
+		reg = <9>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "disabled";
+
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
-- 
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v5 4/5] ARM: Kirkwood: Fix qnap vendor prefix

[David Woodhouse]

[-- Attachment #1.1: Type: text/plain, Size: 747 bytes --]

On Wed, 2014-02-19 at 22:49 +1000, klightspeed@killerwolves.net wrote:
> Correct the vendor prefix for qnap, which should be the stock ticker
> symbol qnapsz.

No. This is an ABI change which appears to be gratuitous.

Perhaps it's really necessary, and perhaps it's harmless because it
won't *really* break compatibility with existing firmware because these
boxes have *always* shipped with a DTB built into the kernel or
something.

In which case all I'm complaining about is the fact that you didn't
properly address that in the commit comment and *explain* why it was
OK...

-- 
David Woodhouse                            Open Source Technology Centre
David.Woodhouse@intel.com                              Intel Corporation

[-- Attachment #1.2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 5745 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 4/5] ARM: Kirkwood: Fix qnap vendor prefix

[Andrew Lunn]

> diff --git a/drivers/power/reset/qnap-poweroff.c b/drivers/power/reset/qnap-poweroff.c
> index a75db7f..d350ece 100644
> --- a/drivers/power/reset/qnap-poweroff.c
> +++ b/drivers/power/reset/qnap-poweroff.c
> @@ -41,7 +41,7 @@ static const struct power_off_cfg synology_power_off_cfg = {
>  };
>  
>  static const struct of_device_id qnap_power_off_of_match_table[] = {
> -	{ .compatible = "qnap,power-off",
> +	{ .compatible = "qnapsz,power-off",
>  	  .data = &qnap_power_off_cfg,
>  	},

Hi Ben

This causes issues for devices using old DT blobs. You need to keep
the old entry as well as supporting the new vendor prefix.

We need to consider, is it worth the hassle of changing the prefix,
since it has been in use for a long time. I think using the stock
ticker is a "rule of thumb" and not a strict requirement.

      Andrew
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v5 4/5] ARM: Kirkwood: Fix qnap vendor prefix

[Ben Peddell]

On 19/02/14 23:05, Andrew Lunn wrote:
>> diff --git a/drivers/power/reset/qnap-poweroff.c b/drivers/power/reset/qnap-poweroff.c
>> index a75db7f..d350ece 100644
>> --- a/drivers/power/reset/qnap-poweroff.c
>> +++ b/drivers/power/reset/qnap-poweroff.c
>> @@ -41,7 +41,7 @@ static const struct power_off_cfg synology_power_off_cfg = {
>>  };
>>  
>>  static const struct of_device_id qnap_power_off_of_match_table[] = {
>> -	{ .compatible = "qnap,power-off",
>> +	{ .compatible = "qnapsz,power-off",
>>  	  .data = &qnap_power_off_cfg,
>>  	},
> 
> Hi Ben
> 
> This causes issues for devices using old DT blobs. You need to keep
> the old entry as well as supporting the new vendor prefix.
> 
> We need to consider, is it worth the hassle of changing the prefix,
> since it has been in use for a long time. I think using the stock
> ticker is a "rule of thumb" and not a strict requirement.

So, in this case it would be best to change qnapsz back to qnap in 
patch #1, and completely remove this patch?

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v5 4/5] ARM: Kirkwood: Fix qnap vendor prefix

[Mark Rutland]

On Wed, Feb 19, 2014 at 01:14:16PM +0000, Ben Peddell wrote:
> On 19/02/14 23:05, Andrew Lunn wrote:
> >> diff --git a/drivers/power/reset/qnap-poweroff.c b/drivers/power/reset/qnap-poweroff.c
> >> index a75db7f..d350ece 100644
> >> --- a/drivers/power/reset/qnap-poweroff.c
> >> +++ b/drivers/power/reset/qnap-poweroff.c
> >> @@ -41,7 +41,7 @@ static const struct power_off_cfg synology_power_off_cfg = {
> >>  };
> >>  
> >>  static const struct of_device_id qnap_power_off_of_match_table[] = {
> >> -	{ .compatible = "qnap,power-off",
> >> +	{ .compatible = "qnapsz,power-off",
> >>  	  .data = &qnap_power_off_cfg,
> >>  	},
> > 
> > Hi Ben
> > 
> > This causes issues for devices using old DT blobs. You need to keep
> > the old entry as well as supporting the new vendor prefix.
> > 
> > We need to consider, is it worth the hassle of changing the prefix,
> > since it has been in use for a long time. I think using the stock
> > ticker is a "rule of thumb" and not a strict requirement.
> 
> So, in this case it would be best to change qnapsz back to qnap in 
> patch #1, and completely remove this patch?

If we already have users of the qnap prefix, yes please.

Thanks,
Mark.