From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Chen Subject: [PATCH v10 06/15] usb: phy-mxs: change description of usb device speed Date: Thu, 20 Feb 2014 13:14:35 +0800 Message-ID: <1392873284-9386-7-git-send-email-peter.chen@freescale.com> References: <1392873284-9386-1-git-send-email-peter.chen@freescale.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1392873284-9386-1-git-send-email-peter.chen@freescale.com> Sender: linux-doc-owner@vger.kernel.org To: balbi@ti.com, shawn.guo@linaro.org, robh+dt@kernel.org, grant.likely@linaro.org, pawel.moll@arm.com, mark.rutland@arm.com Cc: alexander.shishkin@linux.intel.com, linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org, festevam@gmail.com, marex@denx.de, kernel@pengutronix.de, m.grzeschik@pengutronix.de, frank.li@freescale.com, peter.chen@freescale.com, gregkh@linuxfoundation.org, devicetree@vger.kernel.org, linux-doc@vger.kernel.org List-Id: devicetree@vger.kernel.org Change "high speed" to "HS" Change "non-high speed" to "FS/LS" Implementation of notify_suspend and notify_resume will be different according to mxs_phy_data->flags. Signed-off-by: Peter Chen --- drivers/usb/phy/phy-mxs-usb.c | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index 2411e05..1663a66 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -168,8 +168,8 @@ static int mxs_phy_suspend(struct usb_phy *x, int suspend) static int mxs_phy_on_connect(struct usb_phy *phy, enum usb_device_speed speed) { - dev_dbg(phy->dev, "%s speed device has connected\n", - (speed == USB_SPEED_HIGH) ? "high" : "non-high"); + dev_dbg(phy->dev, "%s device has connected\n", + (speed == USB_SPEED_HIGH) ? "HS" : "FS/LS"); if (speed == USB_SPEED_HIGH) writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, @@ -181,8 +181,8 @@ static int mxs_phy_on_connect(struct usb_phy *phy, static int mxs_phy_on_disconnect(struct usb_phy *phy, enum usb_device_speed speed) { - dev_dbg(phy->dev, "%s speed device has disconnected\n", - (speed == USB_SPEED_HIGH) ? "high" : "non-high"); + dev_dbg(phy->dev, "%s device has disconnected\n", + (speed == USB_SPEED_HIGH) ? "HS" : "FS/LS"); if (speed == USB_SPEED_HIGH) writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, -- 1.7.8