From: Markus Pargmann <mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
To: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Liam Girdwood <lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Lars-Peter Clausen <lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org>,
alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
Markus Pargmann <mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v6 1/4] ASoC: tlv320aic32x4: Support for master clock
Date: Thu, 20 Feb 2014 18:22:58 +0100 [thread overview]
Message-ID: <1392916981-9333-2-git-send-email-mpa@pengutronix.de> (raw)
In-Reply-To: <1392916981-9333-1-git-send-email-mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Add support for a master clock passed through DT. The master clock of
the codec is only active when the codec is in use.
Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>
Cc: Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Signed-off-by: Markus Pargmann <mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
.../devicetree/bindings/sound/tlv320aic32x4.txt | 4 ++++
sound/soc/codecs/tlv320aic32x4.c | 21 +++++++++++++++++++++
2 files changed, 25 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt
index db05510..352be7b 100644
--- a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt
+++ b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt
@@ -8,6 +8,8 @@ Required properties:
Optional properties:
- reset-gpios: Reset-GPIO phandle with args as described in gpio/gpio.txt
+ - clocks/clock-names: Clock named 'mclk' for the master clock of the codec.
+ See clock/clock-bindings.txt for information about the detailed format.
Example:
@@ -15,4 +17,6 @@ Example:
codec: tlv320aic32x4@18 {
compatible = "ti,tlv320aic32x4";
reg = <0x18>;
+ clocks = <&clks 201>;
+ clock-names = "mclk";
};
diff --git a/sound/soc/codecs/tlv320aic32x4.c b/sound/soc/codecs/tlv320aic32x4.c
index 1dd50e4..643fa53 100644
--- a/sound/soc/codecs/tlv320aic32x4.c
+++ b/sound/soc/codecs/tlv320aic32x4.c
@@ -33,6 +33,7 @@
#include <linux/i2c.h>
#include <linux/cdev.h>
#include <linux/slab.h>
+#include <linux/clk.h>
#include <sound/tlv320aic32x4.h>
#include <sound/core.h>
@@ -67,6 +68,7 @@ struct aic32x4_priv {
u32 micpga_routing;
bool swapdacs;
int rstn_gpio;
+ struct clk *mclk;
};
/* 0dB min, 0.5dB steps */
@@ -487,8 +489,18 @@ static int aic32x4_mute(struct snd_soc_dai *dai, int mute)
static int aic32x4_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
+ struct aic32x4_priv *aic32x4 = snd_soc_codec_get_drvdata(codec);
+ int ret;
+
switch (level) {
case SND_SOC_BIAS_ON:
+ /* Switch on master clock */
+ ret = clk_prepare_enable(aic32x4->mclk);
+ if (ret) {
+ dev_err(codec->dev, "Failed to enable master clock\n");
+ return ret;
+ }
+
/* Switch on PLL */
snd_soc_update_bits(codec, AIC32X4_PLLPR,
AIC32X4_PLLEN, AIC32X4_PLLEN);
@@ -539,6 +551,9 @@ static int aic32x4_set_bias_level(struct snd_soc_codec *codec,
/* Switch off BCLK_N Divider */
snd_soc_update_bits(codec, AIC32X4_BCLKN,
AIC32X4_BCLKEN, 0);
+
+ /* Switch off master clock */
+ clk_disable_unprepare(aic32x4->mclk);
break;
case SND_SOC_BIAS_OFF:
break;
@@ -717,6 +732,12 @@ static int aic32x4_i2c_probe(struct i2c_client *i2c,
aic32x4->rstn_gpio = -1;
}
+ aic32x4->mclk = devm_clk_get(&i2c->dev, "mclk");
+ if (IS_ERR(aic32x4->mclk)) {
+ dev_err(&i2c->dev, "Failed getting the mclk. The current implementation does not support the usage of this codec without mclk\n");
+ return PTR_ERR(aic32x4->mclk);
+ }
+
if (gpio_is_valid(aic32x4->rstn_gpio)) {
ret = devm_gpio_request_one(&i2c->dev, aic32x4->rstn_gpio,
GPIOF_OUT_INIT_LOW, "tlv320aic32x4 rstn");
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next parent reply other threads:[~2014-02-20 17:22 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1392916981-9333-1-git-send-email-mpa@pengutronix.de>
[not found] ` <1392916981-9333-1-git-send-email-mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2014-02-20 17:22 ` Markus Pargmann [this message]
[not found] ` <1392916981-9333-2-git-send-email-mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2014-02-23 3:59 ` [PATCH v6 1/4] ASoC: tlv320aic32x4: Support for master clock Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1392916981-9333-2-git-send-email-mpa@pengutronix.de \
--to=mpa-bicnvbalz9megne8c9+irq@public.gmane.org \
--cc=alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org \
--cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).