Re: [PATCH v3 2/2] i2c: New bus driver for the Qualcomm QUP I2C controller

[Joe Perches <joe@perches.com>]

On Thu, 2014-02-20 at 16:38 -0800, Bjorn Andersson wrote:
> This bus driver supports the QUP i2c hardware controller in the Qualcomm SOCs.
> The Qualcomm Universal Peripheral Engine (QUP) is a general purpose data path
> engine with input/output FIFOs and an embedded i2c mini-core. The driver
> supports FIFO mode (for low bandwidth applications) and block mode (interrupt
> generated for each block-size data transfer).

trivia:

> diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
[]
> +#ifdef CONFIG_PM_SLEEP
> +static int qup_i2c_suspend(struct device *device)
> +{
> +	dev_dbg(device, "system suspend");
> +	qup_i2c_pm_suspend_runtime(device);
> +	return 0;
> +}
> +
> +static int qup_i2c_resume(struct device *device)
> +{
> +	dev_dbg(device, "system resume");
> +	qup_i2c_pm_resume_runtime(device);
> +	pm_runtime_mark_last_busy(device);
> +	pm_request_autosuspend(device);
> +	return 0;
> +}
> +#endif

Missing terminating newlines for dev_dbg statements.