From: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Tejun Heo <tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Cc: Oliver Schinagl <oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org>,
Richard Zhu
<Hong-Xing.Zhu-KZfg59tc24xl57MIdRCFDg@public.gmane.org>,
Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>,
Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
linux-ide-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH v7 04/15] ahci-platform: Add enable_ / disable_resources helper functions
Date: Sat, 22 Feb 2014 16:53:33 +0100 [thread overview]
Message-ID: <1393084424-31099-5-git-send-email-hdegoede@redhat.com> (raw)
In-Reply-To: <1393084424-31099-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
drivers/ata/ahci_platform.c | 112 ++++++++++++++++++++++++++++--------------
include/linux/ahci_platform.h | 2 +
2 files changed, 77 insertions(+), 37 deletions(-)
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 907c076..6ebbc17 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -139,6 +139,68 @@ void ahci_platform_disable_clks(struct ahci_host_priv *hpriv)
}
EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
+/**
+ * ahci_platform_enable_resources - Enable platform resources
+ * @hpriv: host private area to store config values
+ *
+ * This function enables all ahci_platform managed resources in
+ * the following order:
+ * 1) Regulator
+ * 2) Clocks (through ahci_platform_enable_clks)
+ *
+ * If resource enabling fails at any point the previous enabled
+ * resources are disabled in reverse order.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
+{
+ int rc;
+
+ if (hpriv->target_pwr) {
+ rc = regulator_enable(hpriv->target_pwr);
+ if (rc)
+ return rc;
+ }
+
+ rc = ahci_platform_enable_clks(hpriv);
+ if (rc)
+ goto disable_regulator;
+
+ return 0;
+
+disable_regulator:
+ if (hpriv->target_pwr)
+ regulator_disable(hpriv->target_pwr);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
+
+/**
+ * ahci_platform_disable_resources - Disable platform resources
+ * @hpriv: host private area to store config values
+ *
+ * This function disables all ahci_platform managed resources in
+ * the following order:
+ * 1) Clocks (through ahci_platform_disable_clks)
+ * 2) Regulator
+ *
+ * LOCKING:
+ * None.
+ */
+void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
+{
+ ahci_platform_disable_clks(hpriv);
+
+ if (hpriv->target_pwr)
+ regulator_disable(hpriv->target_pwr);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_disable_resources);
+
static void ahci_put_clks(struct ahci_host_priv *hpriv)
{
int c;
@@ -221,15 +283,9 @@ static int ahci_probe(struct platform_device *pdev)
hpriv->clks[i] = clk;
}
- if (hpriv->target_pwr) {
- rc = regulator_enable(hpriv->target_pwr);
- if (rc)
- goto free_clk;
- }
-
- rc = ahci_enable_clks(dev, hpriv);
+ rc = ahci_platform_enable_resources(hpriv);
if (rc)
- goto disable_regulator;
+ goto free_clk;
/*
* Some platforms might need to prepare for mmio region access,
@@ -240,7 +296,7 @@ static int ahci_probe(struct platform_device *pdev)
if (pdata && pdata->init) {
rc = pdata->init(dev, hpriv->mmio);
if (rc)
- goto disable_unprepare_clk;
+ goto disable_resources;
}
ahci_save_initial_config(dev, hpriv,
@@ -310,11 +366,8 @@ static int ahci_probe(struct platform_device *pdev)
pdata_exit:
if (pdata && pdata->exit)
pdata->exit(dev);
-disable_unprepare_clk:
- ahci_disable_clks(hpriv);
-disable_regulator:
- if (hpriv->target_pwr)
- regulator_disable(hpriv->target_pwr);
+disable_resources:
+ ahci_platform_disable_resources(hpriv);
free_clk:
ahci_put_clks(hpriv);
return rc;
@@ -329,11 +382,8 @@ static void ahci_host_stop(struct ata_host *host)
if (pdata && pdata->exit)
pdata->exit(dev);
- ahci_disable_clks(hpriv);
+ ahci_platform_disable_resources(hpriv);
ahci_put_clks(hpriv);
-
- if (hpriv->target_pwr)
- regulator_disable(hpriv->target_pwr);
}
#ifdef CONFIG_PM_SLEEP
@@ -368,10 +418,7 @@ static int ahci_suspend(struct device *dev)
if (pdata && pdata->suspend)
return pdata->suspend(dev);
- ahci_disable_clks(hpriv);
-
- if (hpriv->target_pwr)
- regulator_disable(hpriv->target_pwr);
+ ahci_platform_disable_resources(hpriv);
return 0;
}
@@ -383,26 +430,20 @@ static int ahci_resume(struct device *dev)
struct ahci_host_priv *hpriv = host->private_data;
int rc;
- if (hpriv->target_pwr) {
- rc = regulator_enable(hpriv->target_pwr);
- if (rc)
- return rc;
- }
-
- rc = ahci_enable_clks(dev, hpriv);
+ rc = ahci_platform_enable_resources(hpriv);
if (rc)
- goto disable_regulator;
+ return rc;
if (pdata && pdata->resume) {
rc = pdata->resume(dev);
if (rc)
- goto disable_unprepare_clk;
+ goto disable_resources;
}
if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
rc = ahci_reset_controller(host);
if (rc)
- goto disable_unprepare_clk;
+ goto disable_resources;
ahci_init_controller(host);
}
@@ -411,11 +452,8 @@ static int ahci_resume(struct device *dev)
return 0;
-disable_unprepare_clk:
- ahci_disable_clks(hpriv);
-disable_regulator:
- if (hpriv->target_pwr)
- regulator_disable(hpriv->target_pwr);
+disable_resources:
+ ahci_platform_disable_resources(hpriv);
return rc;
}
diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h
index 769d065..b674b01 100644
--- a/include/linux/ahci_platform.h
+++ b/include/linux/ahci_platform.h
@@ -33,5 +33,7 @@ struct ahci_platform_data {
int ahci_platform_enable_clks(struct ahci_host_priv *hpriv);
void ahci_platform_disable_clks(struct ahci_host_priv *hpriv);
+int ahci_platform_enable_resources(struct ahci_host_priv *hpriv);
+void ahci_platform_disable_resources(struct ahci_host_priv *hpriv);
#endif /* _AHCI_PLATFORM_H */
--
1.9.0
next prev parent reply other threads:[~2014-02-22 15:53 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-22 15:53 (unknown), Hans de Goede
[not found] ` <1393084424-31099-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-02-22 15:53 ` [PATCH v7 01/15] libahci: Allow drivers to override start_engine Hans de Goede
2014-02-22 15:53 ` [PATCH v7 02/15] ahci-platform: Add support for devices with more then 1 clock Hans de Goede
2014-03-03 17:40 ` Bartlomiej Zolnierkiewicz
2014-02-22 15:53 ` [PATCH v7 03/15] ahci-platform: Add support for an optional regulator for sata-target power Hans de Goede
2014-02-22 15:53 ` Hans de Goede [this message]
2014-02-22 15:53 ` [PATCH v7 05/15] ahci-platform: "Library-ise" ahci_probe functionality Hans de Goede
[not found] ` <1393084424-31099-6-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-03-03 18:38 ` Bartlomiej Zolnierkiewicz
2014-02-22 15:53 ` [PATCH v7 06/15] ahci-platform: "Library-ise" suspend / resume functionality Hans de Goede
2014-02-22 15:53 ` [PATCH v7 07/15] ARM: sunxi: Add support for Allwinner SUNXi SoCs sata to ahci_platform Hans de Goede
[not found] ` <1393084424-31099-8-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-02-22 20:40 ` Tejun Heo
2014-02-22 15:53 ` [PATCH v7 08/15] ahci-imx: Port to library-ised ahci_platform Hans de Goede
2014-02-28 21:08 ` Russell King - ARM Linux
[not found] ` <20140228210820.GZ21483-l+eeeJia6m9vn6HldHNs0ANdhmdF6hFW@public.gmane.org>
2014-03-01 10:38 ` Hans de Goede
2014-03-01 11:24 ` Russell King - ARM Linux
[not found] ` <20140301112424.GB21483-l+eeeJia6m9vn6HldHNs0ANdhmdF6hFW@public.gmane.org>
2014-03-01 12:54 ` Hans de Goede
[not found] ` <1393084424-31099-9-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-03-04 12:04 ` Bartlomiej Zolnierkiewicz
2014-02-22 15:53 ` [PATCH v7 09/15] ata: ahci_platform: Add DT compatible for Synopsis DWC AHCI controller Hans de Goede
2014-02-22 15:53 ` [PATCH v7 10/15] ata: ahci_platform: Update DT compatible list Hans de Goede
2014-02-22 15:53 ` [PATCH v7 11/15] ata: ahci_platform: Manage SATA PHY Hans de Goede
2014-02-22 15:53 ` [PATCH v7 12/15] ata: ahci_platform: runtime resume the device before use Hans de Goede
2014-02-22 15:53 ` [PATCH v7 13/15] ARM: sun4i: dt: Remove grouping + simple-bus compatible for regulators Hans de Goede
[not found] ` <1393084424-31099-14-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-02-22 21:44 ` Maxime Ripard
2014-02-23 8:03 ` Hans de Goede
[not found] ` <5309AB64.7010603-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-02-24 9:14 ` Maxime Ripard
2014-02-22 15:53 ` [PATCH v7 14/15] ARM: sun4i: dt: Add ahci / sata support Hans de Goede
2014-02-22 15:53 ` [PATCH v7 15/15] ARM: sun7i: " Hans de Goede
2014-02-22 16:26 ` [PATCH v7 00/15] ahci: library-ise ahci_platform, add sunxi driver and cleanup imx driver Hans de Goede
[not found] ` <5308CFC8.4020400-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-02-22 20:37 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1393084424-31099-5-git-send-email-hdegoede@redhat.com \
--to=hdegoede-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
--cc=Hong-Xing.Zhu-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-ide-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org \
--cc=rogerq-l0cyMroinI0@public.gmane.org \
--cc=tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).