From: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Tejun Heo <tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Cc: Oliver Schinagl <oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org>,
Richard Zhu
<Hong-Xing.Zhu-KZfg59tc24xl57MIdRCFDg@public.gmane.org>,
Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>,
Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
linux-ide-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH v7 05/15] ahci-platform: "Library-ise" ahci_probe functionality
Date: Sat, 22 Feb 2014 16:53:34 +0100 [thread overview]
Message-ID: <1393084424-31099-6-git-send-email-hdegoede@redhat.com> (raw)
In-Reply-To: <1393084424-31099-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
ahci_probe consists of 3 steps:
1) Get resources (get mmio, clks, regulator)
2) Enable resources, handled by ahci_platform_enable_resouces
3) The more or less standard ahci-host controller init sequence
This commit refactors step 1 and 3 into separate functions, so the platform
drivers for AHCI implementations which need a specific order in step 2,
and / or need to do some custom register poking at some time, can re-use
ahci-platform.c code without needing to copy and paste it.
Note that ahci_platform_init_host's prototype takes the 3 non function
members of ahci_platform_data as arguments, the idea is that drivers using
the new exported utility functions will not use ahci_platform_data at all,
and hopefully in the future ahci_platform_data can go away entirely.
Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
drivers/ata/ahci_platform.c | 195 ++++++++++++++++++++++++++++--------------
include/linux/ahci_platform.h | 14 +++
2 files changed, 144 insertions(+), 65 deletions(-)
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 6ebbc17..7f3f2ac 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -201,64 +201,64 @@ void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
}
EXPORT_SYMBOL_GPL(ahci_platform_disable_resources);
-static void ahci_put_clks(struct ahci_host_priv *hpriv)
+static void ahci_platform_put_resources(struct device *dev, void *res)
{
+ struct ahci_host_priv *hpriv = res;
int c;
for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++)
clk_put(hpriv->clks[c]);
}
-static int ahci_probe(struct platform_device *pdev)
+/**
+ * ahci_platform_get_resources - Get platform resources
+ * @pdev: platform device to get resources for
+ *
+ * This function allocates an ahci_host_priv struct, and gets the
+ * following resources, storing a reference to them inside the returned
+ * struct:
+ *
+ * 1) mmio registers (IORESOURCE_MEM 0, mandatory)
+ * 2) regulator for controlling the targets power (optional)
+ * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
+ * or for non devicetree enabled platforms a single clock
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * The allocated ahci_host_priv on success, otherwise an ERR_PTR value
+ */
+struct ahci_host_priv *ahci_platform_get_resources(
+ struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct ahci_platform_data *pdata = dev_get_platdata(dev);
- const struct platform_device_id *id = platform_get_device_id(pdev);
- struct ata_port_info pi = ahci_port_info[id ? id->driver_data : 0];
- const struct ata_port_info *ppi[] = { &pi, NULL };
struct ahci_host_priv *hpriv;
- struct ata_host *host;
- struct resource *mem;
struct clk *clk;
- int irq;
- int n_ports;
- int i;
- int rc;
+ int i, rc = -ENOMEM;
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!mem) {
- dev_err(dev, "no mmio space\n");
- return -EINVAL;
- }
+ if (!devres_open_group(dev, NULL, GFP_KERNEL))
+ return ERR_PTR(-ENOMEM);
- irq = platform_get_irq(pdev, 0);
- if (irq <= 0) {
- dev_err(dev, "no irq\n");
- return -EINVAL;
- }
+ hpriv = devres_alloc(ahci_platform_put_resources, sizeof(*hpriv),
+ GFP_KERNEL);
+ if (!hpriv)
+ goto err_out;
- if (pdata && pdata->ata_port_info)
- pi = *pdata->ata_port_info;
+ devres_add(dev, hpriv);
- hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
- if (!hpriv) {
- dev_err(dev, "can't alloc ahci_host_priv\n");
- return -ENOMEM;
- }
-
- hpriv->flags |= (unsigned long)pi.private_data;
-
- hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
+ hpriv->mmio = devm_ioremap_resource(dev,
+ platform_get_resource(pdev, IORESOURCE_MEM, 0));
if (!hpriv->mmio) {
- dev_err(dev, "can't map %pR\n", mem);
- return -ENOMEM;
+ dev_err(dev, "no mmio space\n");
+ goto err_out;
}
hpriv->target_pwr = devm_regulator_get_optional(dev, "target");
if (IS_ERR(hpriv->target_pwr)) {
rc = PTR_ERR(hpriv->target_pwr);
if (rc == -EPROBE_DEFER)
- return -EPROBE_DEFER;
+ goto err_out;
hpriv->target_pwr = NULL;
}
@@ -277,33 +277,62 @@ static int ahci_probe(struct platform_device *pdev)
if (IS_ERR(clk)) {
rc = PTR_ERR(clk);
if (rc == -EPROBE_DEFER)
- goto free_clk;
+ goto err_out;
break;
}
hpriv->clks[i] = clk;
}
- rc = ahci_platform_enable_resources(hpriv);
- if (rc)
- goto free_clk;
+ devres_remove_group(dev, NULL);
+ return hpriv;
- /*
- * Some platforms might need to prepare for mmio region access,
- * which could be done in the following init call. So, the mmio
- * region shouldn't be accessed before init (if provided) has
- * returned successfully.
- */
- if (pdata && pdata->init) {
- rc = pdata->init(dev, hpriv->mmio);
- if (rc)
- goto disable_resources;
- }
+err_out:
+ devres_release_group(dev, NULL);
+ return ERR_PTR(rc);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_get_resources);
+
+/**
+ * ahci_platform_init_host - Bring up an ahci-platform host
+ * @pdev: platform device pointer for the host
+ * @hpriv: ahci-host private data for the host
+ * @pi_template: template for the ata_port_info to use
+ * @force_port_map: param passed to ahci_save_initial_config
+ * @mask_port_map: param passed to ahci_save_initial_config
+ *
+ * This function does all the usual steps needed to bring up an
+ * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
+ * must be initialized / enabled before calling this.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_init_host(struct platform_device *pdev,
+ struct ahci_host_priv *hpriv,
+ const struct ata_port_info *pi_template,
+ unsigned int force_port_map,
+ unsigned int mask_port_map)
+{
+ struct device *dev = &pdev->dev;
+ struct ata_port_info pi = *pi_template;
+ const struct ata_port_info *ppi[] = { &pi, NULL };
+ struct ata_host *host;
+ int i, irq, n_ports, rc;
- ahci_save_initial_config(dev, hpriv,
- pdata ? pdata->force_port_map : 0,
- pdata ? pdata->mask_port_map : 0);
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0) {
+ dev_err(dev, "no irq\n");
+ return -EINVAL;
+ }
/* prepare host */
+ hpriv->flags |= (unsigned long)pi.private_data;
+
+ ahci_save_initial_config(dev, hpriv, force_port_map, mask_port_map);
+
if (hpriv->cap & HOST_CAP_NCQ)
pi.flags |= ATA_FLAG_NCQ;
@@ -320,10 +349,8 @@ static int ahci_probe(struct platform_device *pdev)
n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
host = ata_host_alloc_pinfo(dev, ppi, n_ports);
- if (!host) {
- rc = -ENOMEM;
- goto pdata_exit;
- }
+ if (!host)
+ return -ENOMEM;
host->private_data = hpriv;
@@ -338,7 +365,8 @@ static int ahci_probe(struct platform_device *pdev)
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
- ata_port_desc(ap, "mmio %pR", mem);
+ ata_port_desc(ap, "mmio %pR",
+ platform_get_resource(pdev, IORESOURCE_MEM, 0));
ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
/* set enclosure management message type */
@@ -352,13 +380,53 @@ static int ahci_probe(struct platform_device *pdev)
rc = ahci_reset_controller(host);
if (rc)
- goto pdata_exit;
+ return rc;
ahci_init_controller(host);
ahci_print_info(host, "platform");
- rc = ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
- &ahci_platform_sht);
+ return ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
+ &ahci_platform_sht);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_init_host);
+
+static int ahci_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ahci_platform_data *pdata = dev_get_platdata(dev);
+ const struct platform_device_id *id = platform_get_device_id(pdev);
+ const struct ata_port_info *pi_template;
+ struct ahci_host_priv *hpriv;
+ int rc;
+
+ hpriv = ahci_platform_get_resources(pdev);
+ if (IS_ERR(hpriv))
+ return PTR_ERR(hpriv);
+
+ rc = ahci_platform_enable_resources(hpriv);
+ if (rc)
+ return rc;
+
+ /*
+ * Some platforms might need to prepare for mmio region access,
+ * which could be done in the following init call. So, the mmio
+ * region shouldn't be accessed before init (if provided) has
+ * returned successfully.
+ */
+ if (pdata && pdata->init) {
+ rc = pdata->init(dev, hpriv->mmio);
+ if (rc)
+ goto disable_resources;
+ }
+
+ if (pdata && pdata->ata_port_info)
+ pi_template = pdata->ata_port_info;
+ else
+ pi_template = &ahci_port_info[id ? id->driver_data : 0];
+
+ rc = ahci_platform_init_host(pdev, hpriv, pi_template,
+ pdata ? pdata->force_port_map : 0,
+ pdata ? pdata->mask_port_map : 0);
if (rc)
goto pdata_exit;
@@ -368,8 +436,6 @@ pdata_exit:
pdata->exit(dev);
disable_resources:
ahci_platform_disable_resources(hpriv);
-free_clk:
- ahci_put_clks(hpriv);
return rc;
}
@@ -383,7 +449,6 @@ static void ahci_host_stop(struct ata_host *host)
pdata->exit(dev);
ahci_platform_disable_resources(hpriv);
- ahci_put_clks(hpriv);
}
#ifdef CONFIG_PM_SLEEP
diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h
index b674b01..b80c51c 100644
--- a/include/linux/ahci_platform.h
+++ b/include/linux/ahci_platform.h
@@ -20,7 +20,14 @@
struct device;
struct ata_port_info;
struct ahci_host_priv;
+struct platform_device;
+/*
+ * Note ahci_platform_data is deprecated, it is only kept around for use
+ * by the old da850 and spear13xx ahci code.
+ * New drivers should instead declare their own platform_driver struct, and
+ * use ahci_platform* functions in their own probe, suspend and resume methods.
+ */
struct ahci_platform_data {
int (*init)(struct device *dev, void __iomem *addr);
void (*exit)(struct device *dev);
@@ -35,5 +42,12 @@ int ahci_platform_enable_clks(struct ahci_host_priv *hpriv);
void ahci_platform_disable_clks(struct ahci_host_priv *hpriv);
int ahci_platform_enable_resources(struct ahci_host_priv *hpriv);
void ahci_platform_disable_resources(struct ahci_host_priv *hpriv);
+struct ahci_host_priv *ahci_platform_get_resources(
+ struct platform_device *pdev);
+int ahci_platform_init_host(struct platform_device *pdev,
+ struct ahci_host_priv *hpriv,
+ const struct ata_port_info *pi_template,
+ unsigned int force_port_map,
+ unsigned int mask_port_map);
#endif /* _AHCI_PLATFORM_H */
--
1.9.0
next prev parent reply other threads:[~2014-02-22 15:53 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-22 15:53 (unknown), Hans de Goede
[not found] ` <1393084424-31099-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-02-22 15:53 ` [PATCH v7 01/15] libahci: Allow drivers to override start_engine Hans de Goede
2014-02-22 15:53 ` [PATCH v7 02/15] ahci-platform: Add support for devices with more then 1 clock Hans de Goede
2014-03-03 17:40 ` Bartlomiej Zolnierkiewicz
2014-02-22 15:53 ` [PATCH v7 03/15] ahci-platform: Add support for an optional regulator for sata-target power Hans de Goede
2014-02-22 15:53 ` [PATCH v7 04/15] ahci-platform: Add enable_ / disable_resources helper functions Hans de Goede
2014-02-22 15:53 ` Hans de Goede [this message]
[not found] ` <1393084424-31099-6-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-03-03 18:38 ` [PATCH v7 05/15] ahci-platform: "Library-ise" ahci_probe functionality Bartlomiej Zolnierkiewicz
2014-02-22 15:53 ` [PATCH v7 06/15] ahci-platform: "Library-ise" suspend / resume functionality Hans de Goede
2014-02-22 15:53 ` [PATCH v7 07/15] ARM: sunxi: Add support for Allwinner SUNXi SoCs sata to ahci_platform Hans de Goede
[not found] ` <1393084424-31099-8-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-02-22 20:40 ` Tejun Heo
2014-02-22 15:53 ` [PATCH v7 08/15] ahci-imx: Port to library-ised ahci_platform Hans de Goede
2014-02-28 21:08 ` Russell King - ARM Linux
[not found] ` <20140228210820.GZ21483-l+eeeJia6m9vn6HldHNs0ANdhmdF6hFW@public.gmane.org>
2014-03-01 10:38 ` Hans de Goede
2014-03-01 11:24 ` Russell King - ARM Linux
[not found] ` <20140301112424.GB21483-l+eeeJia6m9vn6HldHNs0ANdhmdF6hFW@public.gmane.org>
2014-03-01 12:54 ` Hans de Goede
[not found] ` <1393084424-31099-9-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-03-04 12:04 ` Bartlomiej Zolnierkiewicz
2014-02-22 15:53 ` [PATCH v7 09/15] ata: ahci_platform: Add DT compatible for Synopsis DWC AHCI controller Hans de Goede
2014-02-22 15:53 ` [PATCH v7 10/15] ata: ahci_platform: Update DT compatible list Hans de Goede
2014-02-22 15:53 ` [PATCH v7 11/15] ata: ahci_platform: Manage SATA PHY Hans de Goede
2014-02-22 15:53 ` [PATCH v7 12/15] ata: ahci_platform: runtime resume the device before use Hans de Goede
2014-02-22 15:53 ` [PATCH v7 13/15] ARM: sun4i: dt: Remove grouping + simple-bus compatible for regulators Hans de Goede
[not found] ` <1393084424-31099-14-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-02-22 21:44 ` Maxime Ripard
2014-02-23 8:03 ` Hans de Goede
[not found] ` <5309AB64.7010603-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-02-24 9:14 ` Maxime Ripard
2014-02-22 15:53 ` [PATCH v7 14/15] ARM: sun4i: dt: Add ahci / sata support Hans de Goede
2014-02-22 15:53 ` [PATCH v7 15/15] ARM: sun7i: " Hans de Goede
2014-02-22 16:26 ` [PATCH v7 00/15] ahci: library-ise ahci_platform, add sunxi driver and cleanup imx driver Hans de Goede
[not found] ` <5308CFC8.4020400-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-02-22 20:37 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1393084424-31099-6-git-send-email-hdegoede@redhat.com \
--to=hdegoede-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
--cc=Hong-Xing.Zhu-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-ide-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org \
--cc=rogerq-l0cyMroinI0@public.gmane.org \
--cc=tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).