devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
To: Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>,
	Sebastian Hesselbarth
	<sebastian.hesselbarth-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>,
	Gregory Clement
	<gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Cc: linux ARM
	<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
	Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v4 10/22] ARM: MM: Add DT binding for Feroceon L2 cache
Date: Sat, 22 Feb 2014 20:14:52 +0100	[thread overview]
Message-ID: <1393096504-11844-11-git-send-email-andrew@lunn.ch> (raw)
In-Reply-To: <1393096504-11844-1-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>

Instantiate the L2 cache from DT. Indicate in DT where the cache
control register is so that it is possible to enable/disable write
through on the CPU.

Signed-off-by: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
Tested-by: Jason Gunthorpe <jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
v2:
Change compatible strings to follow l2x0 convention
Only expect register for kirkwood-cache.
Default to write through if no DT node.
Rename writethrough to wt-override to follow l2cc binding.
Split kirkwood.dtsi change into a patch of its own.
v3
Remove wt-override from the binding
Respect CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH
---
 .../devicetree/bindings/arm/mrvl/feroceon.txt      | 16 ++++++++
 arch/arm/include/asm/hardware/cache-feroceon-l2.h  |  2 +
 arch/arm/mach-kirkwood/board-dt.c                  | 18 ++-------
 arch/arm/mm/cache-feroceon-l2.c                    | 43 ++++++++++++++++++++++
 4 files changed, 64 insertions(+), 15 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/mrvl/feroceon.txt

diff --git a/Documentation/devicetree/bindings/arm/mrvl/feroceon.txt b/Documentation/devicetree/bindings/arm/mrvl/feroceon.txt
new file mode 100644
index 000000000000..0d244b999d10
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mrvl/feroceon.txt
@@ -0,0 +1,16 @@
+* Marvell Feroceon Cache
+
+Required properties:
+- compatible : Should be either "marvell,feroceon-cache" or
+  	       "marvell,kirkwood-cache".
+
+Optional properties:
+- reg        : Address of the L2 cache control register. Mandatory for
+  	       "marvell,kirkwood-cache", not used by "marvell,feroceon-cache"
+
+
+Example:
+		l2: l2-cache@20128 {
+			compatible = "marvell,kirkwood-cache";
+			reg = <0x20128 0x4>;
+		};
diff --git a/arch/arm/include/asm/hardware/cache-feroceon-l2.h b/arch/arm/include/asm/hardware/cache-feroceon-l2.h
index 8edd330aabf6..12e1588dc4f1 100644
--- a/arch/arm/include/asm/hardware/cache-feroceon-l2.h
+++ b/arch/arm/include/asm/hardware/cache-feroceon-l2.h
@@ -9,3 +9,5 @@
  */
 
 extern void __init feroceon_l2_init(int l2_wt_override);
+extern int __init feroceon_of_init(void);
+
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index 29c246858d5a..ec0702c02d6c 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -42,19 +42,6 @@ static void __init kirkwood_map_io(void)
 	iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
 }
 
-static void __init kirkwood_l2_init(void)
-{
-#ifdef CONFIG_CACHE_FEROCEON_L2
-#ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH
-	writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG);
-	feroceon_l2_init(1);
-#else
-	writel(readl(L2_CONFIG_REG) & ~L2_WRITETHROUGH, L2_CONFIG_REG);
-	feroceon_l2_init(0);
-#endif
-#endif
-}
-
 static struct resource kirkwood_cpufreq_resources[] = {
 	[0] = {
 		.start  = CPU_CONTROL_PHYS,
@@ -211,8 +198,9 @@ static void __init kirkwood_dt_init(void)
 
 	BUG_ON(mvebu_mbus_dt_init());
 
-	kirkwood_l2_init();
-
+#ifdef CONFIG_CACHE_FEROCEON_L2
+	feroceon_of_init();
+#endif
 	kirkwood_cpufreq_init();
 	kirkwood_cpuidle_init();
 
diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c
index 898362e7972b..8dc1a2b5a8ed 100644
--- a/arch/arm/mm/cache-feroceon-l2.c
+++ b/arch/arm/mm/cache-feroceon-l2.c
@@ -13,11 +13,16 @@
  */
 
 #include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/highmem.h>
+#include <linux/io.h>
 #include <asm/cacheflush.h>
 #include <asm/cp15.h>
 #include <asm/hardware/cache-feroceon-l2.h>
 
+#define L2_WRITETHROUGH_KIRKWOOD	BIT(4)
+
 /*
  * Low-level cache maintenance operations.
  *
@@ -350,3 +355,41 @@ void __init feroceon_l2_init(int __l2_wt_override)
 	printk(KERN_INFO "Feroceon L2: Cache support initialised%s.\n",
 			 l2_wt_override ? ", in WT override mode" : "");
 }
+#ifdef CONFIG_OF
+static const struct of_device_id feroceon_ids[] __initconst = {
+	{ .compatible = "marvell,kirkwood-cache"},
+	{ .compatible = "marvell,feroceon-cache"},
+	{}
+};
+
+int __init feroceon_of_init(void)
+{
+	struct device_node *node;
+	void __iomem *base;
+	bool l2_wt_override = false;
+	struct resource res;
+
+#if defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
+	l2_wt_override = true;
+#endif
+
+	node = of_find_matching_node(NULL, feroceon_ids);
+	if (node && of_device_is_compatible(node, "marvell,kirkwood-cache")) {
+		if (of_address_to_resource(node, 0, &res))
+			return -ENODEV;
+
+		base = ioremap(res.start, resource_size(&res));
+		if (!base)
+			return -ENOMEM;
+
+		if (l2_wt_override)
+			writel(readl(base) | L2_WRITETHROUGH_KIRKWOOD, base);
+		else
+			writel(readl(base) & ~L2_WRITETHROUGH_KIRKWOOD, base);
+	}
+
+	feroceon_l2_init(l2_wt_override);
+
+	return 0;
+}
+#endif
-- 
1.8.5.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

       reply	other threads:[~2014-02-22 19:14 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1393096504-11844-1-git-send-email-andrew@lunn.ch>
     [not found] ` <1393096504-11844-1-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
2014-02-22 19:14   ` Andrew Lunn [this message]
     [not found]     ` <1393096504-11844-11-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
2014-02-22 20:11       ` [PATCH v4 10/22] ARM: MM: Add DT binding for Feroceon L2 cache Jason Cooper

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1393096504-11844-11-git-send-email-andrew@lunn.ch \
    --to=andrew-g2dyl2zd6by@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
    --cc=jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=sebastian.hesselbarth-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).