From: Geert Uytterhoeven <geert@linux-m68k.org>
To: Simon Horman <horms@verge.net.au>
Cc: devicetree@vger.kernel.org, linux-sh@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Subject: [PATCH v3 2/3] ARM: shmobile: r8a7778/r8a7779 dtsi: Improve and correct HSPI nodes
Date: Tue, 25 Feb 2014 11:37:20 +0100 [thread overview]
Message-ID: <1393324641-3690-1-git-send-email-geert@linux-m68k.org> (raw)
From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
- Add "renesas,hspi-r8a7778" resp. "renesas,hspi-r8a7779" compatible
values,
- Correct reference to parent interrupt controller
(use "interrupt-parent" instead of "interrupt-controller"),
- Add missing "#address-cells" and "#size-cells" properties, which are
needed when populating the SPI buses.
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [HSPI/BockW]
---
v3:
- Split in two patches: bindings and dtsi updates
v2:
- Add Tested-by
- List full example compatible properties with soctypes instead of just
the soctypes, so checkpatch can validate DTSes.
arch/arm/boot/dts/r8a7778.dtsi | 18 ++++++++++++------
arch/arm/boot/dts/r8a7779.dtsi | 18 ++++++++++++------
2 files changed, 24 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 85c5b3b99f5e..3c6fab5c9702 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -204,26 +204,32 @@
};
hspi0: spi@fffc7000 {
- compatible = "renesas,hspi";
+ compatible = "renesas,hspi-r8a7778", "renesas,hspi";
reg = <0xfffc7000 0x18>;
- interrupt-controller = <&gic>;
+ interrupt-parent = <&gic>;
interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
hspi1: spi@fffc8000 {
- compatible = "renesas,hspi";
+ compatible = "renesas,hspi-r8a7778", "renesas,hspi";
reg = <0xfffc8000 0x18>;
- interrupt-controller = <&gic>;
+ interrupt-parent = <&gic>;
interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
hspi2: spi@fffc6000 {
- compatible = "renesas,hspi";
+ compatible = "renesas,hspi-r8a7778", "renesas,hspi";
reg = <0xfffc6000 0x18>;
- interrupt-controller = <&gic>;
+ interrupt-parent = <&gic>;
interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index d0561d4c7c46..8b1a336ee401 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -256,26 +256,32 @@
};
hspi0: spi@fffc7000 {
- compatible = "renesas,hspi";
+ compatible = "renesas,hspi-r8a7779", "renesas,hspi";
reg = <0xfffc7000 0x18>;
- interrupt-controller = <&gic>;
+ interrupt-parent = <&gic>;
interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
hspi1: spi@fffc8000 {
- compatible = "renesas,hspi";
+ compatible = "renesas,hspi-r8a7779", "renesas,hspi";
reg = <0xfffc8000 0x18>;
- interrupt-controller = <&gic>;
+ interrupt-parent = <&gic>;
interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
hspi2: spi@fffc6000 {
- compatible = "renesas,hspi";
+ compatible = "renesas,hspi-r8a7779", "renesas,hspi";
reg = <0xfffc6000 0x18>;
- interrupt-controller = <&gic>;
+ interrupt-parent = <&gic>;
interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
};
--
1.7.9.5
next reply other threads:[~2014-02-25 10:37 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-25 10:37 Geert Uytterhoeven [this message]
2014-02-25 10:37 ` [PATCH v3 3/3] ARM: shmobile: bockw reference dts: Add SPI FLASH Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1393324641-3690-1-git-send-email-geert@linux-m68k.org \
--to=geert@linux-m68k.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@linux-m68k.org \
--cc=horms@verge.net.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).