From: Marc Carino <marc.ceeeee@gmail.com>
To: Christian Daudt <bcm@fixthebug.org>,
Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
Matt Porter <matt.porter@linaro.org>,
Russell King <linux@arm.linux.org.uk>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Marc Carino <marc.ceeeee@gmail.com>,
Matt Porter <mporter@linaro.org>
Subject: [PATCH v7 9/9] ARM: brcmstb: dts: add a reference DTS for Broadcom 7445
Date: Wed, 26 Feb 2014 02:29:12 -0800 [thread overview]
Message-ID: <1393410552-21497-10-git-send-email-marc.ceeeee@gmail.com> (raw)
In-Reply-To: <1393410552-21497-1-git-send-email-marc.ceeeee@gmail.com>
Add a sample DTS which will allow bootup of a board populated
with the BCM7445 chip.
Signed-off-by: Marc Carino <marc.ceeeee@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Matt Porter <mporter@linaro.org>
---
arch/arm/boot/dts/bcm7445-bcm97445svmb.dts | 14 ++++
arch/arm/boot/dts/bcm7445.dtsi | 107 ++++++++++++++++++++++++++++
2 files changed, 121 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
create mode 100644 arch/arm/boot/dts/bcm7445.dtsi
diff --git a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
new file mode 100644
index 0000000..9eec2ac
--- /dev/null
+++ b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
@@ -0,0 +1,14 @@
+/dts-v1/;
+#include "bcm7445.dtsi"
+
+/ {
+ model = "Broadcom STB (bcm7445), SVMB reference board";
+ compatible = "brcm,bcm7445", "brcm,brcmstb";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00 0x00000000 0x00 0x40000000>,
+ <0x00 0x40000000 0x00 0x40000000>,
+ <0x00 0x80000000 0x00 0x40000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi
new file mode 100644
index 0000000..f9c9633
--- /dev/null
+++ b/arch/arm/boot/dts/bcm7445.dtsi
@@ -0,0 +1,107 @@
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "skeleton.dtsi"
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ model = "Broadcom STB (bcm7445)";
+ compatible = "brcm,bcm7445", "brcm,brcmstb";
+ interrupt-parent = <&gic>;
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "brcm,brahma-b15";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,brahma-b15";
+ device_type = "cpu";
+ reg = <1>;
+ };
+
+ cpu@2 {
+ compatible = "brcm,brahma-b15";
+ device_type = "cpu";
+ reg = <2>;
+ };
+
+ cpu@3 {
+ compatible = "brcm,brahma-b15";
+ device_type = "cpu";
+ reg = <3>;
+ };
+ };
+
+ gic: interrupt-controller@ffd00000 {
+ compatible = "brcm,brahma-b15-gic", "arm,cortex-a15-gic";
+ reg = <0x00 0xffd01000 0x00 0x1000>,
+ <0x00 0xffd02000 0x00 0x2000>,
+ <0x00 0xffd04000 0x00 0x2000>,
+ <0x00 0xffd06000 0x00 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ rdb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0 0x00 0xf0000000 0x1000000>;
+
+ serial@406b00 {
+ compatible = "ns16550a";
+ reg = <0x406b00 0x20>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <0x4d3f640>;
+ };
+
+ sun_top_ctrl: syscon@404000 {
+ compatible = "brcm,bcm7445-sun-top-ctrl",
+ "syscon";
+ reg = <0x404000 0x51c>;
+ };
+
+ hif_cpubiuctrl: syscon@3e2400 {
+ compatible = "brcm,bcm7445-hif-cpubiuctrl",
+ "syscon";
+ reg = <0x3e2400 0x5b4>;
+ };
+
+ hif_continuation: syscon@452000 {
+ compatible = "brcm,bcm7445-hif-continuation",
+ "syscon";
+ reg = <0x452000 0x100>;
+ };
+ };
+
+ smpboot {
+ compatible = "brcm,brcmstb-smpboot";
+ syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>;
+ syscon-cont = <&hif_continuation>;
+ };
+
+ reboot {
+ compatible = "brcm,brcmstb-reboot";
+ syscon = <&sun_top_ctrl 0x304 0x308>;
+ };
+};
--
1.7.1
next prev parent reply other threads:[~2014-02-26 10:29 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-26 10:29 [PATCH v7 0/9] ARM: brcmstb: Add Broadcom STB SoC support Marc Carino
2014-02-26 10:29 ` [PATCH v7 1/9] ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs Marc Carino
2014-02-26 10:29 ` [PATCH v7 2/9] power: reset: Add reboot driver for brcmstb Marc Carino
2014-02-26 10:29 ` [PATCH v7 3/9] ARM: brcmstb: add debug UART for earlyprintk support Marc Carino
2014-02-26 10:29 ` [PATCH v7 4/9] ARM: do CPU-specific init for Broadcom Brahma15 cores Marc Carino
2014-02-26 10:29 ` [PATCH v7 5/9] ARM: Enable erratum 798181 for Broadcom Brahma-B15 Marc Carino
[not found] ` <1393410552-21497-6-git-send-email-marc.ceeeee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-02-26 10:47 ` Will Deacon
[not found] ` <20140226104702.GA8961-MRww78TxoiP5vMa5CHWGZ34zcgK1vI+I0E9HWUfgJXw@public.gmane.org>
2014-02-27 0:38 ` Gregory Fong
2014-02-26 10:29 ` [PATCH v7 6/9] ARM: brcmstb: add CPU binding for Broadcom Brahma15 Marc Carino
2014-02-26 10:29 ` [PATCH v7 7/9] ARM: brcmstb: add misc. DT bindings for brcmstb Marc Carino
2014-02-26 10:29 ` [PATCH v7 8/9] ARM: brcmstb: gic: add compatible string for Broadcom Brahma15 Marc Carino
2014-02-26 10:29 ` Marc Carino [this message]
[not found] ` <1393410552-21497-1-git-send-email-marc.ceeeee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-03-21 19:41 ` [PATCH v7 0/9] ARM: brcmstb: Add Broadcom STB SoC support Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1393410552-21497-10-git-send-email-marc.ceeeee@gmail.com \
--to=marc.ceeeee@gmail.com \
--cc=arnd@arndb.de \
--cc=bcm@fixthebug.org \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=matt.porter@linaro.org \
--cc=mporter@linaro.org \
--cc=olof@lixom.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).