From: Roger Quadros <rogerq@ti.com>
To: lee.jones@linaro.org, tony@atomide.com, bcousson@baylibre.com
Cc: devicetree@vger.kernel.org, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org, balbi@ti.com,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Roger Quadros <rogerq@ti.com>
Subject: [PATCH v9 0/9] USB Host support for OMAP5 uEVM
Date: Thu, 27 Feb 2014 16:18:22 +0200 [thread overview]
Message-ID: <1393510711-4697-1-git-send-email-rogerq@ti.com> (raw)
Hi,
This patchset brings up USB Host ports and Ethernet port on
the OMAP5 uEVM board.
It also does some cleanup with respect to DT clock binding
for the mfd/omap-usb-host driver.
Please queue these for -next.
Lee,
I've folded some platform data dependent patches with mfd patches
so that they don't break functionality when applied individually.
You can safely pull in all MFD patches (1 to 6).
Tony & Benoit,
Can you please accept patches 7, 8 and 9?
Thanks.
Tested on:
- OMAP5 uEVM
- Pandaboard ES Rev. B1
- Beagleboard-XM Rev C2 (DT + Legacy)
- Beagleboard Rev C4 (DT + Legacy)
Changelog:
v9:
- Folded dependent platform data patches into MFD patches.
v8:
- Addressed review comments and split patch
"mfd: omap-usb-host: Get clocks based on hardware revision"
- Removed unnecessary usb host dummy clocks on OMAP3
- Removed unnecessary clock alias "ehci_logic_fck" for OMAP3
- Rebased on 3.14-rc3
v7:
- Rebased on 3.14-rc2
- Removed incompatible ids from DT files and examples
v6:
- Initialized clocks to -ENODEV and split patch 3.
v5:
- Expose all clocks in the DT binding document for mfd:omap-usb-host
and mfd:omap-usb-tll
v4:
- Updated DT binding document for clock binding
v3:
- Rebased on top of 3.13-rc7
cheers,
-roger
---
Roger Quadros (9):
mfd: omap-usb-host: Get clocks based on hardware revision
mfd: omap-usb-host: Always fail on clk_get() error
mfd: omap-usb-host: Use proper clock name instead of alias
mfd: omap-usb-host: Use clock names as per function for reference
clocks
mfd: omap-usb-host: Update DT clock binding information
mfd: omap-usb-tll: Update DT clock binding information
ARM: OMAP2+: Remove legacy_init_ehci_clk()
ARM: dts: OMAP2+: Get rid of incompatible ids for USB host nodes
usb: omap: dts: Update DT binding example usage
.../devicetree/bindings/mfd/omap-usb-host.txt | 23 ++++
.../devicetree/bindings/mfd/omap-usb-tll.txt | 10 ++
.../devicetree/bindings/usb/ehci-omap.txt | 2 +-
.../devicetree/bindings/usb/ohci-omap3.txt | 2 +-
arch/arm/boot/dts/omap3.dtsi | 4 +-
arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +-
arch/arm/boot/dts/omap4.dtsi | 10 +-
arch/arm/boot/dts/omap5-uevm.dts | 8 +-
arch/arm/boot/dts/omap5.dtsi | 10 +-
arch/arm/mach-omap2/cclock3xxx_data.c | 4 -
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 6 --
arch/arm/mach-omap2/pdata-quirks.c | 16 ---
drivers/clk/ti/clk-3xxx.c | 4 -
drivers/mfd/omap-usb-host.c | 116 ++++++++++++++-------
14 files changed, 135 insertions(+), 88 deletions(-)
--
1.8.3.2
next reply other threads:[~2014-02-27 14:18 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-27 14:18 Roger Quadros [this message]
2014-02-27 14:18 ` [PATCH v9 1/9] mfd: omap-usb-host: Get clocks based on hardware revision Roger Quadros
2014-03-10 14:14 ` Lee Jones
2014-02-27 14:18 ` [PATCH v9 2/9] mfd: omap-usb-host: Always fail on clk_get() error Roger Quadros
2014-03-10 14:17 ` Lee Jones
2014-02-27 14:18 ` [PATCH v9 3/9] mfd: omap-usb-host: Use proper clock name instead of alias Roger Quadros
2014-03-10 14:32 ` Lee Jones
2014-02-27 14:18 ` [PATCH v9 4/9] mfd: omap-usb-host: Use clock names as per function for reference clocks Roger Quadros
2014-03-10 14:34 ` Lee Jones
2014-02-27 14:18 ` [PATCH v9 5/9] mfd: omap-usb-host: Update DT clock binding information Roger Quadros
2014-02-27 14:18 ` [PATCH v9 6/9] mfd: omap-usb-tll: " Roger Quadros
2014-02-27 14:18 ` [PATCH v9 7/9] ARM: OMAP2+: Remove legacy_init_ehci_clk() Roger Quadros
2014-02-27 14:18 ` [PATCH v9 8/9] ARM: dts: OMAP2+: Get rid of incompatible ids for USB host nodes Roger Quadros
2014-02-27 14:18 ` [PATCH v9 9/9] usb: omap: dts: Update DT binding example usage Roger Quadros
[not found] ` <1393510711-4697-1-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2014-02-28 22:56 ` [PATCH v9 0/9] USB Host support for OMAP5 uEVM Tony Lindgren
[not found] ` <20140228225627.GU13624-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2014-03-03 9:34 ` Roger Quadros
[not found] ` <53144CBC.2050607-l0cyMroinI0@public.gmane.org>
2014-03-04 18:47 ` Tony Lindgren
2014-03-11 8:48 ` Roger Quadros
[not found] ` <531ECDCB.4060700-l0cyMroinI0@public.gmane.org>
2014-03-11 12:02 ` Lee Jones
2014-03-11 12:16 ` Roger Quadros
2014-03-11 13:07 ` Lee Jones
2014-03-11 13:10 ` Roger Quadros
2014-03-11 16:24 ` Tony Lindgren
2014-03-13 22:34 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1393510711-4697-1-git-send-email-rogerq@ti.com \
--to=rogerq@ti.com \
--cc=balbi@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).