devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Sebastian Hesselbarth
	<sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	Ian Campbell
	<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
	Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
	Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
	Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>,
	Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>,
	Gregory Clement
	<gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
	Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v2 3/4] ARM: mvebu: move DT Dove to MVEBU
Date: Thu, 27 Feb 2014 23:03:33 +0100	[thread overview]
Message-ID: <1393538613-28293-1-git-send-email-sebastian.hesselbarth@gmail.com> (raw)
In-Reply-To: <1393536486-3827-4-git-send-email-sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

With all the DT support preparation done, we are able to move Dove
to MVEBU easily. Legacy non-DT mach-dove is left untouched to rot
for a while before removal. Also, convert SATA PHY Kconfig entry,
which is DT-only.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
Changelog:
v1->v2:
- just rename CONFIG_ARCH_DOVE to CONFIG_MACH_DOVE in dts/Makefile
  (Suggested by Jason Cooper)

Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>
Cc: Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Cc: Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>
Cc: Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>
Cc: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
Cc: Gregory Clement <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Cc: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
 arch/arm/boot/dts/Makefile                           |  2 +-
 arch/arm/mach-dove/Kconfig                           | 12 ------------
 arch/arm/mach-dove/Makefile                          |  1 -
 arch/arm/mach-mvebu/Kconfig                          | 12 ++++++++++++
 arch/arm/mach-mvebu/Makefile                         |  1 +
 arch/arm/{mach-dove/board-dt.c => mach-mvebu/dove.c} | 20 ++++++++------------
 drivers/phy/Kconfig                                  |  2 +-
 7 files changed, 23 insertions(+), 27 deletions(-)
 rename arch/arm/{mach-dove/board-dt.c => mach-mvebu/dove.c} (61%)

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 032030361bef..21317af7fe48 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -55,7 +55,7 @@ dtb-$(CONFIG_ARCH_BERLIN) += \
 	berlin2cd-google-chromecast.dtb
 dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
 	da850-evm.dtb
-dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
+dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \
 	dove-cubox.dtb \
 	dove-d2plug.dtb \
 	dove-d3plug.dtb \
diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig
index 0bc7cdf8cf46..d8c439c89ea9 100644
--- a/arch/arm/mach-dove/Kconfig
+++ b/arch/arm/mach-dove/Kconfig
@@ -20,18 +20,6 @@ config MACH_CM_A510
 	  Say 'Y' here if you want your kernel to support the
 	  CompuLab CM-A510 Board.
 
-config MACH_DOVE_DT
-	bool "Marvell Dove Flattened Device Tree"
-	select DOVE_CLK
-	select ORION_IRQCHIP
-	select ORION_TIMER
-	select REGULATOR
-	select REGULATOR_FIXED_VOLTAGE
-	select USE_OF
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell Dove using flattened device tree.
-
 endmenu
 
 endif
diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile
index cbc5c0618788..b608a21919fb 100644
--- a/arch/arm/mach-dove/Makefile
+++ b/arch/arm/mach-dove/Makefile
@@ -2,5 +2,4 @@ obj-y				+= common.o
 obj-$(CONFIG_DOVE_LEGACY)	+= irq.o mpp.o
 obj-$(CONFIG_PCI)		+= pcie.o
 obj-$(CONFIG_MACH_DOVE_DB)	+= dove-db-setup.o
-obj-$(CONFIG_MACH_DOVE_DT)	+= board-dt.o
 obj-$(CONFIG_MACH_CM_A510)	+= cm-a510.o
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 5e269d7263ce..966e5c6b9944 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -46,6 +46,18 @@ config MACH_ARMADA_XP
 	  Say 'Y' here if you want your kernel to support boards based
 	  on the Marvell Armada XP SoC with device tree.
 
+config MACH_DOVE
+	bool "Marvell Dove boards" if ARCH_MULTI_V7
+	select CACHE_L2X0
+	select CPU_PJ4
+	select DOVE_CLK
+	select ORION_IRQCHIP
+	select ORION_TIMER
+	select PINCTRL_DOVE
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell Dove using flattened device tree.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index 878aebe98dcc..dd3e7188f75d 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -5,6 +5,7 @@ AFLAGS_coherency_ll.o		:= -Wa,-march=armv7-a
 
 obj-y				 += system-controller.o mvebu-soc-id.o
 obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o
+obj-$(CONFIG_MACH_DOVE)		 += dove.o
 obj-$(CONFIG_ARCH_MVEBU)	 += coherency.o coherency_ll.o pmsu.o
 obj-$(CONFIG_SMP)                += platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)        += hotplug.o
diff --git a/arch/arm/mach-dove/board-dt.c b/arch/arm/mach-mvebu/dove.c
similarity index 61%
rename from arch/arm/mach-dove/board-dt.c
rename to arch/arm/mach-mvebu/dove.c
index 49fa9abd09da..5e5a43624237 100644
--- a/arch/arm/mach-dove/board-dt.c
+++ b/arch/arm/mach-mvebu/dove.c
@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-dove/board-dt.c
+ * arch/arm/mach-mvebu/dove.c
  *
  * Marvell Dove 88AP510 System On Chip FDT Board
  *
@@ -9,17 +9,14 @@
  */
 
 #include <linux/init.h>
-#include <linux/clk-provider.h>
+#include <linux/mbus.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <asm/hardware/cache-tauros2.h>
 #include <asm/mach/arch.h>
-#include <mach/dove.h>
-#include <mach/pm.h>
-#include <plat/common.h>
 #include "common.h"
 
-static void __init dove_dt_init(void)
+static void __init dove_init(void)
 {
 	pr_info("Dove 88AP510 SoC\n");
 
@@ -30,14 +27,13 @@ static void __init dove_dt_init(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-static const char * const dove_dt_board_compat[] = {
+static const char * const dove_dt_compat[] = {
 	"marvell,dove",
 	NULL
 };
 
-DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)")
-	.map_io		= dove_map_io,
-	.init_machine	= dove_dt_init,
-	.restart	= dove_restart,
-	.dt_compat	= dove_dt_board_compat,
+DT_MACHINE_START(DOVE_DT, "Marvell Dove")
+	.init_machine	= dove_init,
+	.restart	= mvebu_restart,
+	.dt_compat	= dove_dt_compat,
 MACHINE_END
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index c7a551c2d5f1..ffd7f07adca3 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -24,7 +24,7 @@ config PHY_EXYNOS_MIPI_VIDEO
 
 config PHY_MVEBU_SATA
 	def_bool y
-	depends on ARCH_KIRKWOOD || ARCH_DOVE
+	depends on ARCH_KIRKWOOD || MACH_DOVE
 	depends on OF
 	select GENERIC_PHY
 
-- 
1.8.5.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2014-02-27 22:03 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1393536486-3827-1-git-send-email-sebastian.hesselbarth@gmail.com>
2014-02-27 21:28 ` [PATCH 1/4] ARM: dove: add system controller node Sebastian Hesselbarth
     [not found]   ` <1393536486-3827-2-git-send-email-sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-03-04  4:00     ` Jason Cooper
2014-02-27 21:28 ` [PATCH 3/4] ARM: mvebu: move DT Dove to MVEBU Sebastian Hesselbarth
2014-02-27 21:40   ` Jason Cooper
     [not found]     ` <20140227214039.GJ1872-u4khhh1J0LxI1Ri9qeTfzeTW4wlIGRCZ@public.gmane.org>
2014-02-27 21:43       ` Sebastian Hesselbarth
     [not found]         ` <530FB19F.3050209-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-02-27 21:47           ` Jason Cooper
     [not found]   ` <1393536486-3827-4-git-send-email-sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-02-27 22:03     ` Sebastian Hesselbarth [this message]
2014-03-01  8:39       ` [PATCH v3 " Sebastian Hesselbarth
     [not found]         ` <1393663178-22120-1-git-send-email-sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-03-04  4:29           ` Jason Cooper

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1393538613-28293-1-git-send-email-sebastian.hesselbarth@gmail.com \
    --to=sebastian.hesselbarth-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=andrew-g2DYL2Zd6BY@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
    --cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
    --cc=jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org \
    --cc=kishon-l0cyMroinI0@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).