From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hans de Goede Subject: [PATCH 07/19] ARM: sun4i: dt: Add USB host nodes to Mele A1000 dts Date: Sat, 1 Mar 2014 20:26:26 +0100 Message-ID: <1393701998-3553-8-git-send-email-hdegoede@redhat.com> References: <1393701998-3553-1-git-send-email-hdegoede@redhat.com> Reply-To: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Return-path: In-Reply-To: <1393701998-3553-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> List-Post: , List-Help: , List-Archive: Sender: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org List-Subscribe: , List-Unsubscribe: , To: Maxime Ripard Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree , linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org, Roman Byshko , Hans de Goede List-Id: devicetree@vger.kernel.org From: Roman Byshko Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Signed-off-by: Roman Byshko Signed-off-by: Hans de Goede --- arch/arm/boot/dts/sun4i-a10-a1000.dts | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index d6ec839..fa746aea 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -13,6 +13,7 @@ /dts-v1/; /include/ "sun4i-a10.dtsi" +/include/ "sunxi-common-regulators.dtsi" / { model = "Mele A1000"; @@ -35,10 +36,32 @@ }; }; + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + ahci: sata@01c18000 { status = "okay"; }; + ehci1: usb@01c1c000 { + status = "okay"; + }; + + ohci1: usb@01c1c400 { + status = "okay"; + }; + pinctrl@01c20800 { emac_power_pin_a1000: emac_power_pin@0 { allwinner,pins = "PH15"; @@ -94,4 +117,12 @@ enable-active-high; gpio = <&pio 7 15 0>; }; + + reg_usb1_vbus: usb1-vbus { + status = "okay"; + }; + + reg_usb2_vbus: usb2-vbus { + status = "okay"; + }; }; -- 1.9.0