From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kishon Vijay Abraham I Subject: [PATCH v5 6/6] arm/dts: added dt properties to adapt to the new phy framwork Date: Mon, 3 Mar 2014 17:08:15 +0530 Message-ID: <1393846695-14644-7-git-send-email-kishon@ti.com> References: <1393846695-14644-1-git-send-email-kishon@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1393846695-14644-1-git-send-email-kishon@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: bcousson@baylibre.com, balbi@ti.com, devicetree@vger.kernel.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-usb@vger.kernel.org, george.cherian@ti.com, heikki.krogerus@linux.intel.com, rogerq@ti.com Cc: rob.herring@calxeda.com, pawel.moll@arm.com, mark.rutland@arm.com, swarren@wwwdotorg.org, ijc+devicetree@hellion.org.uk, rob@landley.net, tony@atomide.com, linux@arm.linux.org.uk, kishon@ti.com, gregkh@linuxfoundation.org, grant.likely@linaro.org, s.nawrocki@samsung.com, galak@codeaurora.org List-Id: devicetree@vger.kernel.org Added device tree bindings for dwc3, usb2 and usb3 PHYs. The documentation of these can be found at Documentation/devicetree/bindings/phy/phy-bindings.txt and Documentation/devicetree/bindings/phy/ti-phy.txt. Signed-off-by: Kishon Vijay Abraham I --- arch/arm/boot/dts/omap5.dtsi | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index a72813a..1c68558 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -732,7 +732,8 @@ compatible = "snps,dwc3"; reg = <0x4a030000 0x10000>; interrupts = ; - usb-phy = <&usb2_phy>, <&usb3_phy>; + phys = <&usb2_phy>, <&usb3_phy>; + phy-names = "usb2-phy", "usb3-phy"; dr_mode = "peripheral"; tx-fifo-resize; }; @@ -749,6 +750,7 @@ compatible = "ti,omap-usb2"; reg = <0x4a084000 0x7c>; ctrl-module = <&omap_control_usb2phy>; + #phy-cells = <0>; }; usb3_phy: usb3phy@4a084400 { @@ -758,6 +760,7 @@ <0x4a084c00 0x40>; reg-names = "phy_rx", "phy_tx", "pll_ctrl"; ctrl-module = <&omap_control_usb3phy>; + #phy-cells = <0>; }; }; -- 1.7.9.5