[PATCH 2/5] ARM: dts: AM4372: Add USB nodes

[George Cherian <george.cherian@ti.com>]

Add nodes for 2 instances each of
	- ocp2scp
	- USB PHY control module
	- USB PHY
	- dwc3_omap
	- USB

for AM43xx.

Signed-off-by: George Cherian <george.cherian@ti.com>
---
 arch/arm/boot/dts/am4372.dtsi | 99 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 99 insertions(+)

diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 5a7cc38..90408b3 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -698,6 +698,105 @@
 			       <&edma 11>;
 			dma-names = "tx", "rx";
 		};
+
+		am43xx_control_usb2phy1: control-phy@44e10620 {
+			compatible = "ti,control-phy-am437usb2";
+			reg = <0x44e10620 0x4>;
+			reg-names = "power";
+			status = "disabled";
+		};
+
+		am43xx_control_usb2phy2: control-phy@0x44e10628 {
+			compatible = "ti,control-phy-am437usb2";
+			reg = <0x44e10628 0x4>;
+			reg-names = "power";
+			status = "disabled";
+		};
+
+		ocp2scp0: ocp2scp@483a8000 {
+			compatible = "ti,omap-ocp2scp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "ocp2scp0";
+			status = "disabled";
+
+			usb2_phy1: usb2phy1@483a8000 {
+				compatible = "ti,am437x-usb2";
+				reg = <0x483a8000 0x8000>;
+				ctrl-module = <&am43xx_control_usb2phy1>;
+				clocks = <&clk_32768_ck>,
+					 <&usb_otg_ss0_refclk960m>;
+				clock-names = "usb_phy_cm_clk32k",
+					      "usb_otg_ss_refclk960m";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		ocp2scp1: ocp2scp@483e8000 {
+			compatible = "ti,omap-ocp2scp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "ocp2scp1";
+			status = "disabled";
+
+			usb2_phy2: usb2phy2@483e8000 {
+				compatible = "ti,am437x-usb2";
+				reg = <0x483e8000 0x8000>;
+				ctrl-module = <&am43xx_control_usb2phy2>;
+				clocks = <&clk_32768_ck>,
+					 <&usb_otg_ss1_refclk960m>;
+				clock-names = "usb_phy_cm_clk32k",
+					      "usb_otg_ss_refclk960m";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		dwc3_1: omap_dwc3_1@48380000 {
+			compatible = "ti,am437x-dwc3";
+			ti,hwmods = "usb_otg_ss0";
+			reg = <0x48380000 0x10000>;
+			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <1>;
+			ranges;
+			status = "disabled";
+
+			usb1: usb@48390000 {
+				compatible = "synopsys,dwc3";
+				reg = <0x48390000 0x17000>;
+				interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+				usb-phy = <&usb2_phy1>;
+				phy-names = "usb2-phy";
+				status = "disabled";
+			};
+		};
+
+		dwc3_2: omap_dwc3_2@483c0000 {
+			compatible = "ti,am437x-dwc3";
+			ti,hwmods = "usb_otg_ss1";
+			reg = <0x483c0000 0x10000>;
+			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <1>;
+			ranges;
+			status = "disabled";
+
+			usb2: usb@483d0000 {
+				compatible = "synopsys,dwc3";
+				reg = <0x483d0000 0x17000>;
+				interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+				usb-phy = <&usb2_phy2>;
+				phy-names = "usb2-phy";
+				status = "disabled";
+			};
+		};
+
 	};
 };
 
-- 
1.8.3.1