From mboxrd@z Thu Jan 1 00:00:00 1970 From: Roger Quadros Subject: [PATCH 06/12] phy: omap: Select OMAP_OCP2SCP bus driver Date: Mon, 3 Mar 2014 17:07:28 +0200 Message-ID: <1393859254-10937-7-git-send-email-rogerq@ti.com> References: <1393859254-10937-1-git-send-email-rogerq@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1393859254-10937-1-git-send-email-rogerq@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: kishon@ti.com, balbi@ti.com, tony@atomide.com Cc: george.cherian@ti.com, balajitk@ti.com, hdegoede@redhat.com, linux-omap@vger.kernel.org, linux-usb@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org, rogerq@ti.com List-Id: devicetree@vger.kernel.org The OMAP_USB2 and OMAP_PIP3 phy devices will not be detected if the OMAP_OCP2SCP driver is not present. So select it. Signed-off-by: Roger Quadros --- drivers/phy/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 2f02ec8..afdab3e 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -44,6 +44,7 @@ config OMAP_USB2 depends on USB_PHY select GENERIC_PHY select OMAP_CONTROL_PHY + select OMAP_OCP2SCP help Enable this to support the transceiver that is part of SOC. This driver takes care of all the PHY functionality apart from comparator. @@ -55,6 +56,7 @@ config TI_PIPE3 depends on ARCH_OMAP2PLUS || COMPILE_TEST select GENERIC_PHY select OMAP_CONTROL_PHY + select OMAP_OCP2SCP help Enable this to support the PIPE3 PHY that is part of TI SOCs. This driver takes care of all the PHY functionality apart from comparator. -- 1.8.3.2