From mboxrd@z Thu Jan 1 00:00:00 1970 From: Roger Quadros Subject: [PATCH v3 3/8] phy: ti-pipe3: Add SATA compatible to Documentation binding Date: Fri, 7 Mar 2014 12:15:03 +0200 Message-ID: <1394187308-19622-4-git-send-email-rogerq@ti.com> References: <1394187308-19622-1-git-send-email-rogerq@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1394187308-19622-1-git-send-email-rogerq@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: balbi@ti.com, tony@atomide.com Cc: kishon@ti.com, george.cherian@ti.com, balajitk@ti.com, hdegoede@redhat.com, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-usb@vger.kernel.org, rogerq@ti.com List-Id: devicetree@vger.kernel.org SATA PHY needs a new compatible ID. Add it to the DT binding documentation. Acked-by: Kishon Vijay Abraham I Signed-off-by: Roger Quadros --- Documentation/devicetree/bindings/phy/ti-phy.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt index 96ba29e..4ab9cb1 100644 --- a/Documentation/devicetree/bindings/phy/ti-phy.txt +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt @@ -53,7 +53,8 @@ usb2phy@4a0ad080 { TI PIPE3 PHY Required properties: - - compatible: Should be "ti,phy-usb3". "ti,omap-usb3" is deprecated. + - compatible: Should be "ti,phy-usb3" or "ti,phy-pipe3-sata". + "ti,omap-usb3" is deprecated. - reg : Address and length of the register set for the device. - reg-names: The names of the register addresses corresponding to the registers filled in "reg". -- 1.8.3.2