devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Boris BREZILLON <b.brezillon.dev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Maxime Ripard
	<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
	Rob Herring <robherring2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	David Woodhouse <dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>,
	Grant Likely
	<grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Brian Norris
	<computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Jason Gunthorpe
	<jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>,
	Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
Cc: Boris BREZILLON
	<b.brezillon.dev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	dev-3kdeTeqwOZ9EV1b7eY7vFQ@public.gmane.org
Subject: [PATCH v3 2/9] mtd: nand: add ONFI timing mode to nand_timings converter
Date: Wed, 12 Mar 2014 19:07:37 +0100	[thread overview]
Message-ID: <1394647664-8258-3-git-send-email-b.brezillon.dev@gmail.com> (raw)
In-Reply-To: <1394647664-8258-1-git-send-email-b.brezillon.dev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Add a converter to retrieve NAND timings from an ONFI NAND timing mode.
This only support SDR NAND timings for now.

Signed-off-by: Boris BREZILLON <b.brezillon.dev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 drivers/mtd/nand/Makefile       |    2 +-
 drivers/mtd/nand/nand_timings.c |  248 +++++++++++++++++++++++++++++++++++++++
 include/linux/mtd/nand.h        |    4 +
 3 files changed, 253 insertions(+), 1 deletion(-)
 create mode 100644 drivers/mtd/nand/nand_timings.c

diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index c970ce7..0b8a822 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -2,7 +2,7 @@
 # linux/drivers/nand/Makefile
 #
 
-obj-$(CONFIG_MTD_NAND)			+= nand.o
+obj-$(CONFIG_MTD_NAND)			+= nand.o nand_timings.o
 obj-$(CONFIG_MTD_NAND_ECC)		+= nand_ecc.o
 obj-$(CONFIG_MTD_NAND_BCH)		+= nand_bch.o
 obj-$(CONFIG_MTD_NAND_IDS)		+= nand_ids.o nand_hynix.o
diff --git a/drivers/mtd/nand/nand_timings.c b/drivers/mtd/nand/nand_timings.c
new file mode 100644
index 0000000..f66fe95
--- /dev/null
+++ b/drivers/mtd/nand/nand_timings.c
@@ -0,0 +1,248 @@
+/*
+ *  Copyright (C) 2014 Boris BREZILLON <b.brezillon.dev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/mtd/nand.h>
+
+static const struct nand_sdr_timings onfi_sdr_timings[] = {
+	/* Mode 0 */
+	{
+		.tADL_min = 200000,
+		.tALH_min = 20000,
+		.tALS_min = 50000,
+		.tAR_min = 25000,
+		.tCEA_max = 100000,
+		.tCEH_min = 20000,
+		.tCH_min = 20000,
+		.tCHZ_max = 100000,
+		.tCLH_min = 20000,
+		.tCLR_min = 20000,
+		.tCLS_min = 50000,
+		.tCOH_min = 0,
+		.tCS_min = 70000,
+		.tDH_min = 20000,
+		.tDS_min = 40000,
+		.tFEAT_max = 1000000,
+		.tIR_min = 10000,
+		.tITC_max = 1000000,
+		.tRC_min = 100000,
+		.tREA_max = 40000,
+		.tREH_min = 30000,
+		.tRHOH_min = 0,
+		.tRHW_min = 200000,
+		.tRHZ_max = 200000,
+		.tRLOH_min = 0,
+		.tRP_min = 50000,
+		.tRST_max = 250000000000,
+		.tWB_max = 200000,
+		.tRR_min = 40000,
+		.tWC_min = 100000,
+		.tWH_min = 30000,
+		.tWHR_min = 120000,
+		.tWP_min = 50000,
+		.tWW_min = 100000,
+	},
+	/* Mode 1 */
+	{
+		.tADL_min = 100000,
+		.tALH_min = 10000,
+		.tALS_min = 25000,
+		.tAR_min = 10000,
+		.tCEA_max = 45000,
+		.tCEH_min = 20000,
+		.tCH_min = 10000,
+		.tCHZ_max = 50000,
+		.tCLH_min = 10000,
+		.tCLR_min = 10000,
+		.tCLS_min = 25000,
+		.tCOH_min = 15000,
+		.tCS_min = 35000,
+		.tDH_min = 10000,
+		.tDS_min = 20000,
+		.tFEAT_max = 1000000,
+		.tIR_min = 0,
+		.tITC_max = 1000000,
+		.tRC_min = 50000,
+		.tREA_max = 30000,
+		.tREH_min = 15000,
+		.tRHOH_min = 15000,
+		.tRHW_min = 100000,
+		.tRHZ_max = 100000,
+		.tRLOH_min = 0,
+		.tRP_min = 25000,
+		.tRR_min = 20000,
+		.tRST_max = 500000000,
+		.tWB_max = 100000,
+		.tWC_min = 45000,
+		.tWH_min = 15000,
+		.tWHR_min = 80000,
+		.tWP_min = 25000,
+		.tWW_min = 100000,
+	},
+	/* Mode 2 */
+	{
+		.tADL_min = 100000,
+		.tALH_min = 10000,
+		.tALS_min = 15000,
+		.tAR_min = 10000,
+		.tCEA_max = 30000,
+		.tCEH_min = 20000,
+		.tCH_min = 10000,
+		.tCHZ_max = 50000,
+		.tCLH_min = 10000,
+		.tCLR_min = 10000,
+		.tCLS_min = 15000,
+		.tCOH_min = 15000,
+		.tCS_min = 25000,
+		.tDH_min = 5000,
+		.tDS_min = 15000,
+		.tFEAT_max = 1000000,
+		.tIR_min = 0,
+		.tITC_max = 1000000,
+		.tRC_min = 35000,
+		.tREA_max = 25000,
+		.tREH_min = 15000,
+		.tRHOH_min = 15000,
+		.tRHW_min = 100000,
+		.tRHZ_max = 100000,
+		.tRLOH_min = 0,
+		.tRR_min = 20000,
+		.tRST_max = 500000000,
+		.tWB_max = 100000,
+		.tRP_min = 17000,
+		.tWC_min = 35000,
+		.tWH_min = 15000,
+		.tWHR_min = 80000,
+		.tWP_min = 17000,
+		.tWW_min = 100000,
+	},
+	/* Mode 3 */
+	{
+		.tADL_min = 100000,
+		.tALH_min = 5000,
+		.tALS_min = 10000,
+		.tAR_min = 10000,
+		.tCEA_max = 25000,
+		.tCEH_min = 20000,
+		.tCH_min = 5000,
+		.tCHZ_max = 50000,
+		.tCLH_min = 5000,
+		.tCLR_min = 10000,
+		.tCLS_min = 10000,
+		.tCOH_min = 15000,
+		.tCS_min = 25000,
+		.tDH_min = 5000,
+		.tDS_min = 10000,
+		.tFEAT_max = 1000000,
+		.tIR_min = 0,
+		.tITC_max = 1000000,
+		.tRC_min = 30000,
+		.tREA_max = 20000,
+		.tREH_min = 10000,
+		.tRHOH_min = 15000,
+		.tRHW_min = 100000,
+		.tRHZ_max = 100000,
+		.tRLOH_min = 0,
+		.tRP_min = 15000,
+		.tRR_min = 20000,
+		.tRST_max = 500000000,
+		.tWB_max = 100000,
+		.tWC_min = 30000,
+		.tWH_min = 10000,
+		.tWHR_min = 80000,
+		.tWP_min = 15000,
+		.tWW_min = 100000,
+	},
+	/* Mode 4 */
+	{
+		.tADL_min = 70000,
+		.tALH_min = 5000,
+		.tALS_min = 10000,
+		.tAR_min = 10000,
+		.tCEA_max = 25000,
+		.tCEH_min = 20000,
+		.tCH_min = 5000,
+		.tCHZ_max = 30000,
+		.tCLH_min = 5000,
+		.tCLR_min = 10000,
+		.tCLS_min = 10000,
+		.tCOH_min = 15000,
+		.tCS_min = 20000,
+		.tDH_min = 5000,
+		.tDS_min = 10000,
+		.tFEAT_max = 1000000,
+		.tIR_min = 0,
+		.tITC_max = 1000000,
+		.tRC_min = 25000,
+		.tREA_max = 20000,
+		.tREH_min = 10000,
+		.tRHOH_min = 15000,
+		.tRHW_min = 100000,
+		.tRHZ_max = 100000,
+		.tRLOH_min = 5000,
+		.tRP_min = 12000,
+		.tRR_min = 20000,
+		.tRST_max = 500000000,
+		.tWB_max = 100000,
+		.tWC_min = 25000,
+		.tWH_min = 10000,
+		.tWHR_min = 80000,
+		.tWP_min = 12000,
+		.tWW_min = 100000,
+	},
+	/* Mode 5 */
+	{
+		.tADL_min = 70000,
+		.tALH_min = 5000,
+		.tALS_min = 10000,
+		.tAR_min = 10000,
+		.tCEA_max = 25000,
+		.tCEH_min = 20000,
+		.tCH_min = 5000,
+		.tCHZ_max = 30000,
+		.tCLH_min = 5000,
+		.tCLR_min = 10000,
+		.tCLS_min = 10000,
+		.tCOH_min = 15000,
+		.tCS_min = 15000,
+		.tDH_min = 5000,
+		.tDS_min = 7000,
+		.tFEAT_max = 1000000,
+		.tIR_min = 0,
+		.tITC_max = 1000000,
+		.tRC_min = 20000,
+		.tREA_max = 16000,
+		.tREH_min = 7000,
+		.tRHOH_min = 15000,
+		.tRHW_min = 100000,
+		.tRHZ_max = 100000,
+		.tRLOH_min = 5000,
+		.tRP_min = 10000,
+		.tRR_min = 20000,
+		.tRST_max = 500000000,
+		.tWB_max = 100000,
+		.tWC_min = 20000,
+		.tWH_min = 7000,
+		.tWHR_min = 80000,
+		.tWP_min = 10000,
+		.tWW_min = 100000,
+	},
+};
+
+/**
+ * onfi_async_timing_mode_to_sdr_timings - [NAND Interface] Retrieve NAND
+ * timings according to the given ONFI timing mode
+ * @mode: ONFI timing mode
+ */
+const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode)
+{
+	if (mode < 0 || mode > ARRAY_SIZE(onfi_sdr_timings))
+		return ERR_PTR(-EINVAL);
+
+	return &onfi_sdr_timings[mode];
+}
+EXPORT_SYMBOL(onfi_async_timing_mode_to_sdr_timings);
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index f3ff3a3..b8e3c2b 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -847,6 +847,7 @@ static inline bool nand_is_slc(struct nand_chip *chip)
 	return chip->bits_per_cell == 1;
 }
 
+
 /**
  * struct nand_sdr_timings - SDR NAND chip timings
  *
@@ -895,4 +896,7 @@ struct nand_sdr_timings {
 	u32 tWW_min;
 };
 
+/* convert an ONFI timing mode to its timing characteristics. */
+const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode);
+
 #endif /* __LINUX_MTD_NAND_H */
-- 
1.7.9.5

  parent reply	other threads:[~2014-03-12 18:07 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-12 18:07 [PATCH v3 0/9] mtd: nand: add sunxi NAND Flash Controller support Boris BREZILLON
     [not found] ` <1394647664-8258-1-git-send-email-b.brezillon.dev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-03-12 18:07   ` [PATCH v3 1/9] mtd: nand: define struct nand_timings Boris BREZILLON
2014-04-30 17:51     ` Brian Norris
2014-05-01 17:36       ` Boris BREZILLON
2014-05-08 14:29       ` Lee Jones
2014-05-09 15:47         ` Boris BREZILLON
2014-05-20 18:13         ` Brian Norris
2014-03-12 18:07   ` Boris BREZILLON [this message]
2014-04-30 18:06     ` [PATCH v3 2/9] mtd: nand: add ONFI timing mode to nand_timings converter Brian Norris
     [not found]     ` <1394647664-8258-3-git-send-email-b.brezillon.dev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-07-09 17:25       ` Brian Norris
2014-03-12 18:07   ` [PATCH v3 3/9] of: mtd: add NAND timing mode retrieval support Boris BREZILLON
2014-04-30 18:14     ` Brian Norris
2014-03-12 18:07   ` [PATCH v3 4/9] of: mtd: add documentation for the ONFI NAND timing mode property Boris BREZILLON
2014-03-12 18:27     ` Warner Losh
2014-03-12 18:48       ` Boris BREZILLON
     [not found]     ` <1394647664-8258-5-git-send-email-b.brezillon.dev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-05-20 18:25       ` Brian Norris
2014-05-20 19:30         ` Boris BREZILLON
2014-05-20 19:51           ` Jason Gunthorpe
2014-05-20 19:55             ` Brian Norris
2014-05-20 19:52           ` Brian Norris
2014-05-20 21:32             ` Boris BREZILLON
     [not found]               ` <537BC9D4.6070200-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2014-07-09 17:46                 ` Brian Norris
2014-03-12 18:07   ` [PATCH v3 5/9] mtd: nand: add sunxi NAND flash controller support Boris BREZILLON
     [not found]     ` <1394647664-8258-6-git-send-email-b.brezillon.dev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-05-09 16:03       ` Ezequiel Garcia
     [not found]         ` <20140509160341.GA6984-nAQHv47ARr+vIlHkl8J1cg@public.gmane.org>
2014-05-09 16:47           ` Boris BREZILLON
     [not found]             ` <536D069A.40401-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-05-09 17:05               ` Ezequiel Garcia
2014-05-20 18:49             ` Brian Norris
2014-05-20 19:21               ` Brian Norris
2014-05-20 19:36                 ` Boris BREZILLON
2014-03-12 18:07   ` [PATCH v3 6/9] mtd: nand: add sunxi NFC dt bindings doc Boris BREZILLON
2014-03-12 18:07   ` [PATCH v3 7/9] ARM: dt/sunxi: add NFC node to Allwinner A20 SoC Boris BREZILLON
2014-03-12 18:07   ` [PATCH v3 8/9] ARM: dt/sunxi: add A20 NAND controller pin definitions Boris BREZILLON
2014-03-12 18:07   ` [PATCH v3 9/9] ARM: sunxi/dt: enable NAND on cubietruck board Boris BREZILLON

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1394647664-8258-3-git-send-email-b.brezillon.dev@gmail.com \
    --to=b.brezillon.dev-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=arnd-r2nGTMty4D4@public.gmane.org \
    --cc=computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=dev-3kdeTeqwOZ9EV1b7eY7vFQ@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
    --cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
    --cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
    --cc=robherring2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).