[PATCH 5/9] usb: doc: rename ci13xxx-imx.txt to ci-hdrc-imx.txt

[PATCH 5/9] usb: doc: rename ci13xxx-imx.txt to ci-hdrc-imx.txt

[Peter Chen]

We have already renamed the file name, change doc name at this
patch.

Cc: devicetree@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 .../devicetree/bindings/usb/ci-hdrc-imx.txt        |   51 ++++++++++++++++++++
 .../devicetree/bindings/usb/ci13xxx-imx.txt        |   51 --------------------
 2 files changed, 51 insertions(+), 51 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
 delete mode 100644 Documentation/devicetree/bindings/usb/ci13xxx-imx.txt

diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
new file mode 100644
index 0000000..881901a
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
@@ -0,0 +1,51 @@
+* Freescale i.MX ci13xxx usb controllers
+
+Required properties:
+- compatible: Should be "fsl,imx27-usb"
+- reg: Should contain registers location and length
+- interrupts: Should contain controller interrupt
+
+Recommended properies:
+- phy_type: the type of the phy connected to the core. Should be one
+  of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
+  property the PORTSC register won't be touched
+- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
+
+Optional properties:
+- fsl,usbphy: phandler of usb phy that connects to the only one port
+- fsl,usbmisc: phandler of non-core register device, with one argument
+  that indicate usb controller index
+- vbus-supply: regulator for vbus
+- disable-over-current: disable over current detect
+- external-vbus-divider: enables off-chip resistor divider for Vbus
+- imx6-usb-charger-detection: enable imx6 usb charger detect function,
+only set it when the user wants SoC usb charger detection capabilities.
+If the user wants to use charger IC's usb charger detection capabilities,
+please do not set it.
+- fsl,anatop: phandle for anatop module, anatop module is only existed
+at imx6 SoC series
+- pinctrl-names: for names of hsic pin group
+- pinctrl-0: hsic "idle" pin group
+- pinctrl-1: hsic "active" pin group
+- osc-clkgate-delay: the delay between powering up the xtal 24MHz clock
+  and release the clock to the digital logic inside the analog block,
+  0 <= osc-clkgate-delay <= 7.
+- maximum-speed: limit the maximum connection speed to "full-speed".
+
+Examples:
+usb@02184000 { /* USB OTG */
+	compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+	reg = <0x02184000 0x200>;
+	interrupts = <0 43 0x04>;
+	fsl,usbphy = <&usbphy1>;
+	fsl,usbmisc = <&usbmisc 0>;
+	disable-over-current;
+	external-vbus-divider;
+	imx6-usb-charger-detection;
+	fsl,anatop = <&anatop>;
+	pinctrl-names = "idle", "active";
+	pinctrl-0 = <&pinctrl_usbh2_1>;
+	pinctrl-1 = <&pinctrl_usbh2_2>;
+	osc-clkgate-delay = <0x3>;
+	maximum-speed = "full-speed";
+};
diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
deleted file mode 100644
index 881901a..0000000
--- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-* Freescale i.MX ci13xxx usb controllers
-
-Required properties:
-- compatible: Should be "fsl,imx27-usb"
-- reg: Should contain registers location and length
-- interrupts: Should contain controller interrupt
-
-Recommended properies:
-- phy_type: the type of the phy connected to the core. Should be one
-  of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
-  property the PORTSC register won't be touched
-- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
-
-Optional properties:
-- fsl,usbphy: phandler of usb phy that connects to the only one port
-- fsl,usbmisc: phandler of non-core register device, with one argument
-  that indicate usb controller index
-- vbus-supply: regulator for vbus
-- disable-over-current: disable over current detect
-- external-vbus-divider: enables off-chip resistor divider for Vbus
-- imx6-usb-charger-detection: enable imx6 usb charger detect function,
-only set it when the user wants SoC usb charger detection capabilities.
-If the user wants to use charger IC's usb charger detection capabilities,
-please do not set it.
-- fsl,anatop: phandle for anatop module, anatop module is only existed
-at imx6 SoC series
-- pinctrl-names: for names of hsic pin group
-- pinctrl-0: hsic "idle" pin group
-- pinctrl-1: hsic "active" pin group
-- osc-clkgate-delay: the delay between powering up the xtal 24MHz clock
-  and release the clock to the digital logic inside the analog block,
-  0 <= osc-clkgate-delay <= 7.
-- maximum-speed: limit the maximum connection speed to "full-speed".
-
-Examples:
-usb@02184000 { /* USB OTG */
-	compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
-	reg = <0x02184000 0x200>;
-	interrupts = <0 43 0x04>;
-	fsl,usbphy = <&usbphy1>;
-	fsl,usbmisc = <&usbmisc 0>;
-	disable-over-current;
-	external-vbus-divider;
-	imx6-usb-charger-detection;
-	fsl,anatop = <&anatop>;
-	pinctrl-names = "idle", "active";
-	pinctrl-0 = <&pinctrl_usbh2_1>;
-	pinctrl-1 = <&pinctrl_usbh2_2>;
-	osc-clkgate-delay = <0x3>;
-	maximum-speed = "full-speed";
-};
-- 
1.7.8

RE: [lnxrevli] [PATCH 5/9] usb: doc: rename ci13xxx-imx.txt to ci-hdrc-imx.txt

[Peter Chen]

 
> We have already renamed the file name, change doc name at this patch.
> 
> Cc: devicetree@vger.kernel.org
> Cc: linux-doc@vger.kernel.org
> Signed-off-by: Peter Chen <peter.chen@freescale.com>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
>  .../devicetree/bindings/usb/ci-hdrc-imx.txt        |   51
> ++++++++++++++++++++
>  .../devicetree/bindings/usb/ci13xxx-imx.txt        |   51 --------------
> ------
>  2 files changed, 51 insertions(+), 51 deletions(-)  create mode 100644
> Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
>  delete mode 100644 Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> 
> diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
> b/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
> new file mode 100644
> index 0000000..881901a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
> @@ -0,0 +1,51 @@
> +* Freescale i.MX ci13xxx usb controllers
> +
> +Required properties:
> +- compatible: Should be "fsl,imx27-usb"
> +- reg: Should contain registers location and length
> +- interrupts: Should contain controller interrupt
> +
> +Recommended properies:
> +- phy_type: the type of the phy connected to the core. Should be one
> +  of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
> +  property the PORTSC register won't be touched
> +- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
> +
> +Optional properties:
> +- fsl,usbphy: phandler of usb phy that connects to the only one port
> +- fsl,usbmisc: phandler of non-core register device, with one argument
> +  that indicate usb controller index
> +- vbus-supply: regulator for vbus
> +- disable-over-current: disable over current detect
> +- external-vbus-divider: enables off-chip resistor divider for Vbus
> +- imx6-usb-charger-detection: enable imx6 usb charger detect function,
> +only set it when the user wants SoC usb charger detection capabilities.
> +If the user wants to use charger IC's usb charger detection
> +capabilities, please do not set it.
> +- fsl,anatop: phandle for anatop module, anatop module is only existed
> +at imx6 SoC series
> +- pinctrl-names: for names of hsic pin group
> +- pinctrl-0: hsic "idle" pin group
> +- pinctrl-1: hsic "active" pin group
> +- osc-clkgate-delay: the delay between powering up the xtal 24MHz clock
> +  and release the clock to the digital logic inside the analog block,
> +  0 <= osc-clkgate-delay <= 7.
> +- maximum-speed: limit the maximum connection speed to "full-speed".
> +
> +Examples:
> +usb@02184000 { /* USB OTG */
> +	compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
> +	reg = <0x02184000 0x200>;
> +	interrupts = <0 43 0x04>;
> +	fsl,usbphy = <&usbphy1>;
> +	fsl,usbmisc = <&usbmisc 0>;
> +	disable-over-current;
> +	external-vbus-divider;
> +	imx6-usb-charger-detection;
> +	fsl,anatop = <&anatop>;
> +	pinctrl-names = "idle", "active";
> +	pinctrl-0 = <&pinctrl_usbh2_1>;
> +	pinctrl-1 = <&pinctrl_usbh2_2>;
> +	osc-clkgate-delay = <0x3>;
> +	maximum-speed = "full-speed";
> +};
> diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> deleted file mode 100644
> index 881901a..0000000
> --- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> +++ /dev/null
> @@ -1,51 +0,0 @@
> -* Freescale i.MX ci13xxx usb controllers
> -
> -Required properties:
> -- compatible: Should be "fsl,imx27-usb"
> -- reg: Should contain registers location and length
> -- interrupts: Should contain controller interrupt
> -
> -Recommended properies:
> -- phy_type: the type of the phy connected to the core. Should be one
> -  of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
> -  property the PORTSC register won't be touched
> -- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
> -
> -Optional properties:
> -- fsl,usbphy: phandler of usb phy that connects to the only one port
> -- fsl,usbmisc: phandler of non-core register device, with one argument
> -  that indicate usb controller index
> -- vbus-supply: regulator for vbus
> -- disable-over-current: disable over current detect
> -- external-vbus-divider: enables off-chip resistor divider for Vbus
> -- imx6-usb-charger-detection: enable imx6 usb charger detect function, -
> only set it when the user wants SoC usb charger detection capabilities.
> -If the user wants to use charger IC's usb charger detection capabilities,
> -please do not set it.
> -- fsl,anatop: phandle for anatop module, anatop module is only existed -
> at imx6 SoC series
> -- pinctrl-names: for names of hsic pin group
> -- pinctrl-0: hsic "idle" pin group
> -- pinctrl-1: hsic "active" pin group
> -- osc-clkgate-delay: the delay between powering up the xtal 24MHz clock
> -  and release the clock to the digital logic inside the analog block,
> -  0 <= osc-clkgate-delay <= 7.
> -- maximum-speed: limit the maximum connection speed to "full-speed".
> -
> -Examples:
> -usb@02184000 { /* USB OTG */
> -	compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
> -	reg = <0x02184000 0x200>;
> -	interrupts = <0 43 0x04>;
> -	fsl,usbphy = <&usbphy1>;
> -	fsl,usbmisc = <&usbmisc 0>;
> -	disable-over-current;
> -	external-vbus-divider;
> -	imx6-usb-charger-detection;
> -	fsl,anatop = <&anatop>;
> -	pinctrl-names = "idle", "active";
> -	pinctrl-0 = <&pinctrl_usbh2_1>;
> -	pinctrl-1 = <&pinctrl_usbh2_2>;
> -	osc-clkgate-delay = <0x3>;
> -	maximum-speed = "full-speed";
> -};
> --

Sorry, forget it please. I cherry-pick them to freescale internal tree,
and forget to skip sob and cc in commit log.

Peter