[PATCH v6 13/36] mtd: st_spi_fsm: Add device-tree binding documentation

[Lee Jones <lee.jones@linaro.org>]

Cc: devicetree@vger.kernel.org
Acked-by Angus Clark <angus.clark@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 Documentation/devicetree/bindings/mtd/st-fsm.txt | 26 ++++++++++++++++++++++++
 1 file changed, 26 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/st-fsm.txt

diff --git a/Documentation/devicetree/bindings/mtd/st-fsm.txt b/Documentation/devicetree/bindings/mtd/st-fsm.txt
new file mode 100644
index 0000000..c248939
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/st-fsm.txt
@@ -0,0 +1,26 @@
+* ST-Microelectronics SPI FSM Serial (NOR) Flash Controller
+
+Required properties:
+  - compatible : Should be "st,spi-fsm"
+  - reg        : Contains register's location and length.
+  - reg-names  : Should contain the reg names "spi-fsm"
+  - interrupts : The interrupt number
+  - pinctrl-0  : Standard Pinctrl phandle (see: pinctrl/pinctrl-bindings.txt)
+
+Optional properties:
+  - st,syscfg          : Phandle to boot-device system configuration registers
+  - st,boot-device-reg : Address of the aforementioned boot-device register(s)
+  - st,boot-device-spi : Expected boot-device value if booted via this device
+
+Example:
+	spifsm: spifsm@fe902000{
+	        compatible         = "st,spi-fsm";
+	        reg                =  <0xfe902000 0x1000>;
+	        reg-names          = "spi-fsm";
+	        pinctrl-0          = <&pinctrl_fsm>;
+		st,syscfg	   = <&syscfg_rear>;
+	        st,boot-device-reg = <0x958>;
+	        st,boot-device-spi = <0x1a>;
+		status = "okay";
+	};
+
-- 
1.8.3.2