From: Nishanth Menon <nm@ti.com>
To: "David S. Miller" <davem@davemloft.net>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>,
Markus Pargmann <mpa@pengutronix.de>,
Tony Lindgren <tony@atomide.com>,
devicetree@vger.kernel.org, netdev@vger.kernel.org,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Nishanth Menon <nm@ti.com>
Subject: [PATCH] net: micrel : ks8851-ml: add vdd-supply support
Date: Fri, 21 Mar 2014 01:52:48 -0500 [thread overview]
Message-ID: <1395384768-8461-1-git-send-email-nm@ti.com> (raw)
Few platforms use external regulator to keep the ethernet MAC supplied.
So, request and enable the regulator for driver functionality.
Fixes: 66fda75f47dc (regulator: core: Replace direct ops->disable usage)
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Suggested-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
This fixes a regression in SDP4430 platform as reported by Russel here:
http://marc.info/?t=139509918200014&r=1&w=2
Patch is based on [v3.14-rc7] tag, if it is too late to submit, I can repost
rebased to git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git
.../devicetree/bindings/net/micrel-ks8851.txt | 1 +
drivers/net/ethernet/micrel/ks8851.c | 30 +++++++++++++++++++-
2 files changed, 30 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/micrel-ks8851.txt b/Documentation/devicetree/bindings/net/micrel-ks8851.txt
index 11ace3c..4fc3927 100644
--- a/Documentation/devicetree/bindings/net/micrel-ks8851.txt
+++ b/Documentation/devicetree/bindings/net/micrel-ks8851.txt
@@ -7,3 +7,4 @@ Required properties:
Optional properties:
- local-mac-address : Ethernet mac address to use
+- vdd-supply: supply for Ethernet mac
diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c
index 727b546a..e0c92e0 100644
--- a/drivers/net/ethernet/micrel/ks8851.c
+++ b/drivers/net/ethernet/micrel/ks8851.c
@@ -23,6 +23,7 @@
#include <linux/crc32.h>
#include <linux/mii.h>
#include <linux/eeprom_93cx6.h>
+#include <linux/regulator/consumer.h>
#include <linux/spi/spi.h>
@@ -83,6 +84,7 @@ union ks8851_tx_hdr {
* @rc_rxqcr: Cached copy of KS_RXQCR.
* @eeprom_size: Companion eeprom size in Bytes, 0 if no eeprom
* @eeprom: 93CX6 EEPROM state for accessing on-board EEPROM.
+ * @vdd_reg: Optional regulator supplying the chip
*
* The @lock ensures that the chip is protected when certain operations are
* in progress. When the read or write packet transfer is in progress, most
@@ -130,6 +132,7 @@ struct ks8851_net {
struct spi_transfer spi_xfer2[2];
struct eeprom_93cx6 eeprom;
+ struct regulator *vdd_reg;
};
static int msg_enable;
@@ -1414,6 +1417,21 @@ static int ks8851_probe(struct spi_device *spi)
ks->spidev = spi;
ks->tx_space = 6144;
+ ks->vdd_reg = regulator_get_optional(&spi->dev, "vdd");
+ if (IS_ERR(ks->vdd_reg)) {
+ ret = PTR_ERR(ks->vdd_reg);
+ if (ret == -EPROBE_DEFER)
+ goto err_reg;
+ } else {
+ ret = regulator_enable(ks->vdd_reg);
+ if (ret) {
+ dev_err(&spi->dev, "regulator enable fail: %d\n",
+ ret);
+ goto err_reg_en;
+ }
+ }
+
+
mutex_init(&ks->lock);
spin_lock_init(&ks->statelock);
@@ -1508,8 +1526,14 @@ static int ks8851_probe(struct spi_device *spi)
err_netdev:
free_irq(ndev->irq, ks);
-err_id:
err_irq:
+err_id:
+ if (!IS_ERR(ks->vdd_reg))
+ regulator_disable(ks->vdd_reg);
+err_reg_en:
+ if (!IS_ERR(ks->vdd_reg))
+ regulator_put(ks->vdd_reg);
+err_reg:
free_netdev(ndev);
return ret;
}
@@ -1523,6 +1547,10 @@ static int ks8851_remove(struct spi_device *spi)
unregister_netdev(priv->netdev);
free_irq(spi->irq, priv);
+ if (!IS_ERR(priv->vdd_reg)) {
+ regulator_disable(priv->vdd_reg);
+ regulator_put(priv->vdd_reg);
+ }
free_netdev(priv->netdev);
return 0;
--
1.7.9.5
next reply other threads:[~2014-03-21 6:52 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-21 6:52 Nishanth Menon [this message]
[not found] ` <1395384768-8461-1-git-send-email-nm-l0cyMroinI0@public.gmane.org>
2014-03-21 8:51 ` [PATCH] net: micrel : ks8851-ml: add vdd-supply support Markus Pargmann
2014-03-21 9:28 ` [PATCH V2] " Nishanth Menon
2014-03-21 9:30 ` Nishanth Menon
2014-03-21 9:41 ` [RESEND PATCH " Nishanth Menon
2014-03-24 4:37 ` [PATCH] " David Miller
2014-03-25 10:06 ` Markus Pargmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1395384768-8461-1-git-send-email-nm@ti.com \
--to=nm@ti.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=mpa@pengutronix.de \
--cc=netdev@vger.kernel.org \
--cc=rmk+kernel@arm.linux.org.uk \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).