[PATCH V3 2/2] i2c designware add support of I2C standard mode

[Romain Baeriswyl <Romain.Baeriswyl-ux6zf3SgZrrQT0dZR+AlfA@public.gmane.org>]

From: Romain Baeriswyl <Romain.Baeriswyl-ux6zf3SgZrrQT0dZR+AlfA@public.gmane.org>

Some legacy devices support ony I2C standard mode at 100kHz.
This patch allows to select the standard mode through the DTS
with the use of the existing clock-frequency parameter.

When clock-frequency parameter is not set, the fast mode is selected.
Only when the parameter is set at 100000, the standard mode is selected.

Signed-off-by: Romain Baeriswyl <romainba-ux6zf3SgZrrQT0dZR+AlfA@public.gmane.org>
Reviewed-by: Christian Ruppert <christian.ruppert-ux6zf3SgZrrQT0dZR+AlfA@public.gmane.org>
---
 drivers/i2c/busses/i2c-designware-platdrv.c |   23 +++++++++++++++++++++--
 1 files changed, 21 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index fc24399..3685893 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -122,6 +122,7 @@ static int dw_i2c_probe(struct platform_device *pdev)
 	struct i2c_adapter *adap;
 	struct resource *mem;
 	int irq, r;
+	u32 clk_freq;
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
@@ -151,6 +152,9 @@ static int dw_i2c_probe(struct platform_device *pdev)
 		return PTR_ERR(dev->clk);
 	clk_prepare_enable(dev->clk);
 
+	/* fast mode by default because of legacy reasons */
+	clk_freq = 400000;
+
 	if (pdev->dev.of_node) {
 		u32 ht = 0;
 		u32 ic_clk = dev->get_clk_rate_khz(dev);
@@ -166,6 +170,17 @@ static int dw_i2c_probe(struct platform_device *pdev)
 		of_property_read_u32(pdev->dev.of_node,
 				     "i2c-scl-falling-time-ns",
 				     &dev->scl_falling_time);
+
+		of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+				     &clk_freq);
+
+		/* Only standard mode at 100kHz and fast mode at 400kHz
+		 * are supported.
+		 */
+		if (clk_freq != 100000 && clk_freq != 400000) {
+			dev_err(&pdev->dev, "Only 100kHz and 400kHz supported");
+			return -EINVAL;
+		}
 	}
 
 	dev->functionality =
@@ -175,8 +190,12 @@ static int dw_i2c_probe(struct platform_device *pdev)
 		I2C_FUNC_SMBUS_BYTE_DATA |
 		I2C_FUNC_SMBUS_WORD_DATA |
 		I2C_FUNC_SMBUS_I2C_BLOCK;
-	dev->master_cfg =  DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
-		DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST;
+	if (clk_freq == 100000)
+		dev->master_cfg =  DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
+			DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_STD;
+	else
+		dev->master_cfg =  DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
+			DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST;
 
 	/* Try first if we can configure the device from ACPI */
 	r = dw_i2c_acpi_configure(pdev);
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html