devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andrzej Hajda <a.hajda@samsung.com>
To: dri-devel@lists.freedesktop.org
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
	Pawel Moll <pawel.moll@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Andrzej Hajda <a.hajda@samsung.com>,
	Kyungmin Park <kyungmin.park@samsung.com>,
	Rob Herring <robh+dt@kernel.org>,
	Kumar Gala <galak@codeaurora.org>,
	Grant Likely <grant.likely@linaro.org>,
	Marek Szyprowski <m.szyprowski@samsung.com>
Subject: [PATCH v3 00/12] Add DSI display support for Exynos based boards
Date: Fri, 28 Mar 2014 12:52:35 +0100	[thread overview]
Message-ID: <1396007567-4015-1-git-send-email-a.hajda@samsung.com> (raw)

Hi,

This patchset adds drivers and bindings to the following devices:
- Exynos DSI master,
- S6E8AA0 DSI panel,

It adds also display support in DTS files for the following boards:
- Exynos4210/Trats,
- Exynos4412/Trats2.

The patchset is based on exynos_drm_next branch.

It is the 3rd iteration of the patches, main changes:
- based on exynos_drm_next branch,
- added video interface bindings between DSI host and slave,
  it seems to me to be redundand, and I hope when video interface bindings
  will be stabilized it can become optional,
- GPIOs implemented using gpiod framework,
- removed controversial stuff (toshiba bridge implementation and arndale support),
  it will be send in another set of patches

Other changes are described in individual patches.

Regards
Andrzej


Andrzej Hajda (12):
  drm/mipi_dsi: add flags to DSI messages
  drm/mipi_dsi: create dsi devices only for nodes with reg property
  drm/exynos: disallow fbdev initialization if no device is connected
  exynos/dsim: add DT bindings
  drm/exynos: add DSIM driver
  panel/s6e8aa0: add DT bindings
  drm/panel: add S6E8AA0 driver
  ARM: dts: exynos4: add MIPI DSI Master node
  ARM: dts: exynos4210-trats: add panel node
  ARM: dts: exynos4412-trats2: add panel node
  ARM: dts: exynos4210-trats: enable exynos/fimd node
  ARM: dts: exynos4412-trats2: enable exynos/fimd node

 .../devicetree/bindings/panel/samsung,s6e8aa0.txt  |   56 +
 .../devicetree/bindings/video/exynos_dsim.txt      |   80 +
 arch/arm/boot/dts/exynos4.dtsi                     |   14 +
 arch/arm/boot/dts/exynos4210-trats.dts             |   61 +
 arch/arm/boot/dts/exynos4412-trats2.dts            |   70 +
 drivers/gpu/drm/drm_mipi_dsi.c                     |    6 +-
 drivers/gpu/drm/exynos/Kconfig                     |    9 +
 drivers/gpu/drm/exynos/Makefile                    |    1 +
 drivers/gpu/drm/exynos/exynos_drm_drv.c            |   15 +
 drivers/gpu/drm/exynos/exynos_drm_drv.h            |    1 +
 drivers/gpu/drm/exynos/exynos_drm_dsi.c            | 1525 ++++++++++++++++++++
 drivers/gpu/drm/exynos/exynos_drm_fbdev.c          |   21 +
 drivers/gpu/drm/panel/Kconfig                      |    7 +
 drivers/gpu/drm/panel/Makefile                     |    1 +
 drivers/gpu/drm/panel/panel-s6e8aa0.c              | 1069 ++++++++++++++
 include/drm/drm_mipi_dsi.h                         |    6 +
 16 files changed, 2941 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/panel/samsung,s6e8aa0.txt
 create mode 100644 Documentation/devicetree/bindings/video/exynos_dsim.txt
 create mode 100644 drivers/gpu/drm/exynos/exynos_drm_dsi.c
 create mode 100644 drivers/gpu/drm/panel/panel-s6e8aa0.c

-- 
1.8.3.2

             reply	other threads:[~2014-03-28 11:52 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-28 11:52 Andrzej Hajda [this message]
2014-03-28 11:52 ` [PATCH v3 01/12] drm/mipi_dsi: add flags to DSI messages Andrzej Hajda
2014-03-28 11:52 ` [PATCH v3 02/12] drm/mipi_dsi: create dsi devices only for nodes with reg property Andrzej Hajda
2014-03-28 11:52 ` [PATCH v3 03/12] drm/exynos: disallow fbdev initialization if no device is connected Andrzej Hajda
2014-03-28 11:52 ` [PATCH v3 04/12] exynos/dsim: add DT bindings Andrzej Hajda
     [not found] ` <1396007567-4015-1-git-send-email-a.hajda-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2014-03-28 11:52   ` [PATCH v3 05/12] drm/exynos: add DSIM driver Andrzej Hajda
2014-03-28 11:52 ` [PATCH v3 06/12] panel/s6e8aa0: add DT bindings Andrzej Hajda
2014-03-28 11:52 ` [PATCH v3 07/12] drm/panel: add S6E8AA0 driver Andrzej Hajda
2014-03-28 11:52 ` [PATCH v3 08/12] ARM: dts: exynos4: add MIPI DSI Master node Andrzej Hajda
2014-03-28 11:52 ` [PATCH v3 09/12] ARM: dts: exynos4210-trats: add panel node Andrzej Hajda
2014-03-28 11:52 ` [PATCH v3 10/12] ARM: dts: exynos4412-trats2: " Andrzej Hajda
2014-03-28 11:52 ` [PATCH v3 11/12] ARM: dts: exynos4210-trats: enable exynos/fimd node Andrzej Hajda
2014-03-28 11:52 ` [PATCH v3 12/12] ARM: dts: exynos4412-trats2: " Andrzej Hajda
2014-04-01 12:29 ` [PATCH v3 00/12] Add DSI display support for Exynos based boards Inki Dae
     [not found]   ` <CAAQKjZN7u1q6jeLCyQ0qe7VDRY3wUv1PjUeZZ6uoWYjo7vdtZQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-04-02  7:24     ` Andrzej Hajda
2014-04-03  6:54       ` Inki Dae

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1396007567-4015-1-git-send-email-a.hajda@samsung.com \
    --to=a.hajda@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=galak@codeaurora.org \
    --cc=grant.likely@linaro.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).