From: Boris BREZILLON <b.brezillon.dev@gmail.com>
To: Rob Landley <rob@landley.net>,
Nicolas Ferre <nicolas.ferre@atmel.com>,
Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
Thomas Gleixner <tglx@linutronix.de>
Cc: devicetree@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Boris BREZILLON <b.brezillon.dev@gmail.com>
Subject: [RFC PATCH v2 09/10] ARM: at91/dt: add new AIC irq mux definitions for sam9x5 SoCs
Date: Fri, 28 Mar 2014 18:59:07 +0100 [thread overview]
Message-ID: <1396029548-10928-10-git-send-email-b.brezillon.dev@gmail.com> (raw)
In-Reply-To: <1396029548-10928-1-git-send-email-b.brezillon.dev@gmail.com>
Add irq line muxing definition for sam9x5 SoCs.
Signed-off-by: Boris BREZILLON <b.brezillon.dev@gmail.com>
---
arch/arm/boot/dts/at91sam9x5.dtsi | 108 +++++++++++++++++++++++++++++++++++++
1 file changed, 108 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 174219d..ccdfdf3 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -69,6 +69,114 @@
interrupt-controller;
reg = <0xfffff000 0x200>;
atmel,external-irqs = <31>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <1 0x0 0xffffc000 0x4000>,
+ <2 0x0 0xfffff400 0x400>,
+ <3 0x0 0xfffff800 0x400>,
+ <17 0x0 0xf8008000 0x8000>;
+
+ dbgu_irq: irq-mux@1,2e0c {
+ compatible = "atmel,aic-mux-3reg-irq";
+ reg = <1 0x2e0c 0x4>;
+ atmel,aic-mux-reg-mask = <0xc00002e3>;
+ };
+
+ pmc_irq: irq-mux@1,3c64 {
+ compatible = "atmel,aic-mux-3reg-irq";
+ reg = <1 0x3c64 0x4>;
+ atmel,aic-mux-reg-mask = <0x7034b>;
+ };
+
+ pmecc_irq: irq-mux@1,2020 {
+ compatible = "atmel,aic-mux-3reg-irq";
+ reg = <1 0x2020 0x4>;
+ atmel,aic-mux-reg-mask = <0x1>;
+ };
+
+ pmerrloc_irq: irq-mux@1,2618 {
+ compatible = "atmel,aic-mux-3reg-irq";
+ reg = <1 0x2618 0x4>;
+ atmel,aic-mux-reg-mask = <0x1>;
+ };
+
+ pit_irq: irq-mux@1,3e30 {
+ compatible = "atmel,aic-mux-1reg-irq";
+ reg = <1 0x3e30 0x4>;
+ atmel,aic-mux-reg-mask = <0x2000000>;
+ };
+
+ wdt_irq: irq-mux@1,3e40 {
+ compatible = "atmel,aic-mux-1reg-irq";
+ reg = <1 0x3e40 0x4>;
+ atmel,aic-mux-reg-mask = <0x1000>;
+ };
+
+ rtc_irq: irq-mux@1,3ed4 {
+ compatible = "atmel,aic-mux-3reg-irq";
+ reg = <1 0x3ed4 0x4>;
+ atmel,aic-mux-reg-mask = <0x1f>;
+ };
+
+ pioA_irq: irq-mux@2,44 {
+ compatible = "atmel,aic-mux-3reg-irq";
+ reg = <2 0x44 0x4>;
+ atmel,aic-mux-reg-mask = <0xffffffff>;
+ };
+
+ pioB_irq: irq-mux@2,244 {
+ compatible = "atmel,aic-mux-3reg-irq";
+ reg = <2 0x244 0x4>;
+ atmel,aic-mux-reg-mask = <0xffffffff>;
+ };
+
+ pioC_irq: irq-mux@3,44 {
+ compatible = "atmel,aic-mux-3reg-irq";
+ reg = <3 0x44 0x4>;
+ atmel,aic-mux-reg-mask = <0xffffffff>;
+ };
+
+ pioD_irq: irq-mux@3,244 {
+ compatible = "atmel,aic-mux-3reg-irq";
+ reg = <3 0x244 0x4>;
+ atmel,aic-mux-reg-mask = <0xffffffff>;
+ };
+
+ tc0_irq: irq-mux@17,28 {
+ compatible = "atmel,aic-mux-3reg-irq";
+ reg = <17 0x28 0x4>;
+ atmel,aic-mux-reg-mask = <0xff>;
+ };
+
+ tc1_irq: irq-mux@17,68 {
+ compatible = "atmel,aic-mux-3reg-irq";
+ reg = <17 0x68 0x4>;
+ atmel,aic-mux-reg-mask = <0xff>;
+ };
+
+ tc2_irq: irq-mux@17,a8 {
+ compatible = "atmel,aic-mux-3reg-irq";
+ reg = <17 0xa8 0x4>;
+ atmel,aic-mux-reg-mask = <0xff>;
+ };
+
+ tc3_irq: irq-mux@17,4028 {
+ compatible = "atmel,aic-mux-3reg-irq";
+ reg = <17 0x4028 0x4>;
+ atmel,aic-mux-reg-mask = <0xff>;
+ };
+
+ tc4_irq: irq-mux@17,4068 {
+ compatible = "atmel,aic-mux-3reg-irq";
+ reg = <17 0x4068 0x4>;
+ atmel,aic-mux-reg-mask = <0xff>;
+ };
+
+ tc5_irq: irq-mux@17,40a8 {
+ compatible = "atmel,aic-mux-3reg-irq";
+ reg = <17 0x40a8 0x4>;
+ atmel,aic-mux-reg-mask = <0xff>;
+ };
};
ramc0: ramc@ffffe800 {
--
1.7.9.5
next prev parent reply other threads:[~2014-03-28 17:59 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-28 17:58 [RFC PATCH v2 00/10] ARM: at91: move aic driver to drivers/irqchips Boris BREZILLON
2014-03-28 17:58 ` [RFC PATCH v2 01/10] genirq: generic chip: export irq_map_generic_chip function Boris BREZILLON
2014-03-28 17:59 ` [RFC PATCH v2 02/10] irqchip: atmel-aic: add new atmel AIC driver Boris BREZILLON
2014-03-28 17:59 ` [RFC PATCH v2 03/10] ARM: at91: introduce OLD_IRQ_AT91 Kconfig option Boris BREZILLON
2014-03-29 9:06 ` Thomas Petazzoni
2014-03-29 9:12 ` Arnd Bergmann
2014-03-29 9:52 ` Boris BREZILLON
2014-03-28 17:59 ` [RFC PATCH v2 04/10] ARM: at91: enclose at91_aic_xx calls in IS_ENABLED(CONFIG_OLD_IRQ_AT91) blocks Boris BREZILLON
2014-03-28 17:59 ` [RFC PATCH v2 05/10] ARM: at91: make use of the new AIC driver for dt enabled boards Boris BREZILLON
2014-03-29 9:07 ` Thomas Petazzoni
2014-03-29 10:11 ` Boris BREZILLON
2014-03-28 17:59 ` [RFC PATCH v2 06/10] irqchip: atmel-aic: move binding doc to interrupt-controller directory Boris BREZILLON
2014-03-28 17:59 ` [RFC PATCH v2 07/10] irqchip: atmel-aic: document new dt properties and children nodes Boris BREZILLON
2014-03-29 9:19 ` Thomas Petazzoni
2014-03-30 13:27 ` Boris BREZILLON
2014-03-30 14:55 ` Boris BREZILLON
2014-03-28 17:59 ` [RFC PATCH v2 08/10] ARM: at91: remove old irq material Boris BREZILLON
2014-03-28 17:59 ` Boris BREZILLON [this message]
2014-03-28 17:59 ` [RFC PATCH v2 10/10] ARM: at91/dt: add new AIC irq mux definitions for sama5 SoCs Boris BREZILLON
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1396029548-10928-10-git-send-email-b.brezillon.dev@gmail.com \
--to=b.brezillon.dev@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.ferre@atmel.com \
--cc=plagnioj@jcrosoft.com \
--cc=rob@landley.net \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).