* [PATCH 0/1] OMAP5: USB3 fix for 3.15
@ 2014-04-01 10:37 Roger Quadros
2014-04-01 10:37 ` [PATCH 1/1] ARM: dts: omap5: Add clocks to USB3 PHY node Roger Quadros
0 siblings, 1 reply; 5+ messages in thread
From: Roger Quadros @ 2014-04-01 10:37 UTC (permalink / raw)
To: tony
Cc: kishon, balbi, linux-omap, linux-kernel, devicetree, linux-usb,
Roger Quadros
Hi Tony,
The following patch fixes USB3 on OMAP5 on linux-next.
There was a patch [1] that added named clocks to the USB3 phy driver
but somehow the dts part got missed out.
Due to that USB3 on OMAP5 is currently broken on linux-next and
this patch should fix it.
cheers,
-roger
[1] - http://patchwork.ozlabs.org/patch/327481/
Roger Quadros (1):
ARM: dts: omap5: Add clocks to USB3 PHY node
arch/arm/boot/dts/omap5.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
--
1.8.3.2
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 1/1] ARM: dts: omap5: Add clocks to USB3 PHY node
2014-04-01 10:37 [PATCH 0/1] OMAP5: USB3 fix for 3.15 Roger Quadros
@ 2014-04-01 10:37 ` Roger Quadros
2014-04-01 14:13 ` Felipe Balbi
0 siblings, 1 reply; 5+ messages in thread
From: Roger Quadros @ 2014-04-01 10:37 UTC (permalink / raw)
To: tony
Cc: kishon, balbi, linux-omap, linux-kernel, devicetree, linux-usb,
Roger Quadros
The USB3 PHY driver (ti-pipe3) was updated so that the relevant
clock phandles are expected in the DT node.
Provide the necessary clocks.
Reported-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm/boot/dts/omap5.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 757f0b9..4df1e7a 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -794,6 +794,12 @@
<0x4a084c00 0x40>;
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
ctrl-module = <&omap_control_usb3phy>;
+ clocks = <&usb_phy_cm_clk32k>,
+ <&sys_clkin>,
+ <&usb_otg_ss_refclk960m>;
+ clock-names = "wkupclk",
+ "sysclk",
+ "refclk";
#phy-cells = <0>;
};
};
--
1.8.3.2
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 1/1] ARM: dts: omap5: Add clocks to USB3 PHY node
2014-04-01 10:37 ` [PATCH 1/1] ARM: dts: omap5: Add clocks to USB3 PHY node Roger Quadros
@ 2014-04-01 14:13 ` Felipe Balbi
2014-04-14 7:22 ` Roger Quadros
0 siblings, 1 reply; 5+ messages in thread
From: Felipe Balbi @ 2014-04-01 14:13 UTC (permalink / raw)
To: Roger Quadros
Cc: tony, kishon, balbi, linux-omap, linux-kernel, devicetree,
linux-usb
[-- Attachment #1: Type: text/plain, Size: 1058 bytes --]
On Tue, Apr 01, 2014 at 01:37:27PM +0300, Roger Quadros wrote:
> The USB3 PHY driver (ti-pipe3) was updated so that the relevant
> clock phandles are expected in the DT node.
> Provide the necessary clocks.
>
> Reported-by: Kishon Vijay Abraham I <kishon@ti.com>
> Signed-off-by: Roger Quadros <rogerq@ti.com>
Great!!!
Acked-by: Felipe Balbi <balbi@ti.com>
> ---
> arch/arm/boot/dts/omap5.dtsi | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
> index 757f0b9..4df1e7a 100644
> --- a/arch/arm/boot/dts/omap5.dtsi
> +++ b/arch/arm/boot/dts/omap5.dtsi
> @@ -794,6 +794,12 @@
> <0x4a084c00 0x40>;
> reg-names = "phy_rx", "phy_tx", "pll_ctrl";
> ctrl-module = <&omap_control_usb3phy>;
> + clocks = <&usb_phy_cm_clk32k>,
> + <&sys_clkin>,
> + <&usb_otg_ss_refclk960m>;
> + clock-names = "wkupclk",
> + "sysclk",
> + "refclk";
> #phy-cells = <0>;
> };
> };
> --
> 1.8.3.2
>
--
balbi
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 1/1] ARM: dts: omap5: Add clocks to USB3 PHY node
2014-04-01 14:13 ` Felipe Balbi
@ 2014-04-14 7:22 ` Roger Quadros
[not found] ` <534B8CC3.7050008-l0cyMroinI0@public.gmane.org>
0 siblings, 1 reply; 5+ messages in thread
From: Roger Quadros @ 2014-04-14 7:22 UTC (permalink / raw)
To: tony; +Cc: balbi, kishon, linux-omap, linux-kernel, devicetree, linux-usb
Hi Tony,
On 04/01/2014 05:13 PM, Felipe Balbi wrote:
> On Tue, Apr 01, 2014 at 01:37:27PM +0300, Roger Quadros wrote:
>> The USB3 PHY driver (ti-pipe3) was updated so that the relevant
>> clock phandles are expected in the DT node.
>> Provide the necessary clocks.
>>
>> Reported-by: Kishon Vijay Abraham I <kishon@ti.com>
>> Signed-off-by: Roger Quadros <rogerq@ti.com>
>
> Great!!!
>
> Acked-by: Felipe Balbi <balbi@ti.com>
Could you please pick this up for 3.15-rc? Thanks.
cheers,
-roger
>
>> ---
>> arch/arm/boot/dts/omap5.dtsi | 6 ++++++
>> 1 file changed, 6 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
>> index 757f0b9..4df1e7a 100644
>> --- a/arch/arm/boot/dts/omap5.dtsi
>> +++ b/arch/arm/boot/dts/omap5.dtsi
>> @@ -794,6 +794,12 @@
>> <0x4a084c00 0x40>;
>> reg-names = "phy_rx", "phy_tx", "pll_ctrl";
>> ctrl-module = <&omap_control_usb3phy>;
>> + clocks = <&usb_phy_cm_clk32k>,
>> + <&sys_clkin>,
>> + <&usb_otg_ss_refclk960m>;
>> + clock-names = "wkupclk",
>> + "sysclk",
>> + "refclk";
>> #phy-cells = <0>;
>> };
>> };
>> --
>> 1.8.3.2
>>
>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-04-18 22:29 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-04-01 10:37 [PATCH 0/1] OMAP5: USB3 fix for 3.15 Roger Quadros
2014-04-01 10:37 ` [PATCH 1/1] ARM: dts: omap5: Add clocks to USB3 PHY node Roger Quadros
2014-04-01 14:13 ` Felipe Balbi
2014-04-14 7:22 ` Roger Quadros
[not found] ` <534B8CC3.7050008-l0cyMroinI0@public.gmane.org>
2014-04-18 22:29 ` Tony Lindgren
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).