From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sebastian Reichel Subject: [RFC 2/2] [media] Ad DT binding documentation for si4713 Date: Sun, 6 Apr 2014 13:52:05 +0200 Message-ID: <1396785125-8759-3-git-send-email-sre@kernel.org> References: <1396785125-8759-1-git-send-email-sre@kernel.org> Return-path: In-Reply-To: <1396785125-8759-1-git-send-email-sre@kernel.org> Sender: linux-kernel-owner@vger.kernel.org To: linux-media@vger.kernel.org Cc: Tony Lindgren , Eduardo Valentin , Mauro Carvalho Chehab , Hans Verkuil , Dinesh Ram , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Sebastian Reichel List-Id: devicetree@vger.kernel.org This patch adds the DT bindings documentation for Silicon Labs Si4713 FM radio transmitter. Signed-off-by: Sebastian Reichel --- Documentation/devicetree/bindings/media/si4713.txt | 30 ++++++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/si4713.txt diff --git a/Documentation/devicetree/bindings/media/si4713.txt b/Documentation/devicetree/bindings/media/si4713.txt new file mode 100644 index 0000000..5ee5552 --- /dev/null +++ b/Documentation/devicetree/bindings/media/si4713.txt @@ -0,0 +1,30 @@ +* Silicon Labs FM Radio transmitter + +The Silicon Labs Si4713 is an FM radio transmitter with receive power scan +supporting 76-108 MHz. It includes an RDS encoder and has both, a stereo-analog +and a digital interface, which supports I2S, left-justified and a custom +DSP-mode format. It is programmable through an I2C interface. + +Required Properties: +- compatible: Should contain "silabs,si4713" +- reg: the I2C address of the device + +Optional Properties: +- interrupts-extended: Interrupt specifier for the chips interrupt +- reset-gpios: GPIO specifier for the chips reset line +- vdd-supply: phandle for Vdd regulator +- vio-supply: phandle for Vio regulator + +Example: + +&i2c2 { + fmtx: si4713@63 { + compatible = "silabs,si4713"; + reg = <0x63>; + + interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */ + reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */ + vio-supply = <&vio>; + vdd-supply = <&vaux1>; + }; +}; -- 1.9.1