[PATCH v2 1/2] ARM: dts: keystone: add cell's information to i2c nodes

[Grygorii Strashko <grygorii.strashko-l0cyMroinI0@public.gmane.org>]

I2C nodes should always have #address-cells and #size-cells defined,
otherwise warnings will be produced in case of adding child
nodes to the I2C bus in DT:
Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc/i2c@2530800/pca@20
Warning (avoid_default_addr_size): Relying on default #size-cells value for /soc/i2c@2530800/pca@20

Hence, ensure that all i2cX nodes have #address-cells and #size-cells
properties defined.

Signed-off-by: Grygorii Strashko <grygorii.strashko-l0cyMroinI0@public.gmane.org>
---
 arch/arm/boot/dts/keystone.dtsi |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index 90823eb..f730392 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -115,6 +115,8 @@
 			clock-frequency = <100000>;
 			clocks = <&clki2c>;
 			interrupts = <GIC_SPI 286 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		i2c2: i2c@2530800 {
@@ -123,6 +125,8 @@
 			clock-frequency = <100000>;
 			clocks = <&clki2c>;
 			interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		spi0: spi@21000400 {
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html