From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ulf Hansson Subject: [PATCH V3 11/19] mmc: mmci: Mark the DT bindings for highspeed mode as deprecated Date: Thu, 10 Apr 2014 14:20:54 +0200 Message-ID: <1397132462-8005-12-git-send-email-ulf.hansson@linaro.org> References: <1397132462-8005-1-git-send-email-ulf.hansson@linaro.org> Return-path: In-Reply-To: <1397132462-8005-1-git-send-email-ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Russell King , Linus Walleij Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Rob Herring , Ulf Hansson List-Id: devicetree@vger.kernel.org The common mmc DT parser supports bindings for highspeed mode, thus there are no need for mmci to provide it's own versions for these. Mark them as deprecated in the documentation. Signed-off-by: Ulf Hansson Acked-by: Linus Walleij Acked-by: Rob Herring --- Documentation/devicetree/bindings/mmc/mmci.txt | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/mmc/mmci.txt b/Documentation/devicetree/bindings/mmc/mmci.txt index 2c8756f..03796cf 100644 --- a/Documentation/devicetree/bindings/mmc/mmci.txt +++ b/Documentation/devicetree/bindings/mmc/mmci.txt @@ -15,8 +15,6 @@ Required properties: Optional properties: - arm,primecell-periphid : contains the PrimeCell Peripheral ID, it overrides the ID provided by the HW -- mmc-cap-mmc-highspeed : indicates whether MMC is high speed capable. -- mmc-cap-sd-highspeed : indicates whether SD is high speed capable. - vqmmc-supply : phandle to the regulator device tree node, mentioned as the VCCQ/VDD_IO supply in the eMMC/SD specs. - st,sig-dir-dat0 : bus signal direction pin used for DAT[0]. @@ -26,6 +24,10 @@ Optional properties: - st,sig-dir-cmd : cmd signal direction pin used for CMD. - st,sig-pin-fbclk : feedback clock signal pin used. +Deprecated properties: +- mmc-cap-mmc-highspeed : indicates whether MMC is high speed capable. +- mmc-cap-sd-highspeed : indicates whether SD is high speed capable. + Example: sdi0_per1@80126000 { @@ -42,8 +44,8 @@ sdi0_per1@80126000 { max-frequency = <100000000>; bus-width = <4>; - mmc-cap-sd-highspeed; - mmc-cap-mmc-highspeed; + cap-sd-highspeed; + cap-mmc-highspeed; cd-gpios = <&gpio2 31 0x4>; // 95 st,sig-dir-dat0; st,sig-dir-dat2; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html