From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ulf Hansson Subject: [PATCH V3 14/19] ARM: ux500: Add a vmmc regulator through DT for the poped eMMC for href Date: Thu, 10 Apr 2014 14:20:57 +0200 Message-ID: <1397132462-8005-15-git-send-email-ulf.hansson@linaro.org> References: <1397132462-8005-1-git-send-email-ulf.hansson@linaro.org> Return-path: In-Reply-To: <1397132462-8005-1-git-send-email-ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Russell King , Linus Walleij Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Rob Herring , Ulf Hansson List-Id: devicetree@vger.kernel.org Add a node in DT for the proper regulator which means we can move away from the mmci platform data which currently holds the corresponding OCR mask. The mmci driver can then calculate the OCR mask based on the voltages supported by the regulator, instead of relying on the platform data. Signed-off-by: Ulf Hansson Acked-by: Linus Walleij --- arch/arm/boot/dts/ste-href.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 48ea4c1..bf8f0ed 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -154,6 +154,7 @@ bus-width = <8>; cap-mmc-highspeed; non-removable; + vmmc-supply = <&db8500_vsmps2_reg>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdi2_default_mode>; pinctrl-1 = <&sdi2_sleep_mode>; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html