From: Ulf Hansson <ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
Linus Walleij
<linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Ulf Hansson <ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Subject: [PATCH V3 15/19] ARM: ux500: Remove redundant board file for mmci platform data
Date: Thu, 10 Apr 2014 14:20:58 +0200 [thread overview]
Message-ID: <1397132462-8005-16-git-send-email-ulf.hansson@linaro.org> (raw)
In-Reply-To: <1397132462-8005-1-git-send-email-ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Since all platform data has been transfered to DT, we don't need the
container for the mmci platform data anymore. Remove the file and the
corresponding references to it's data.
Signed-off-by: Ulf Hansson <ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Acked-by: Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
arch/arm/mach-ux500/Makefile | 3 +-
arch/arm/mach-ux500/board-mop500-sdi.c | 166 --------------------------------
arch/arm/mach-ux500/board-mop500.h | 5 -
arch/arm/mach-ux500/cpu-db8500.c | 4 -
4 files changed, 1 insertion(+), 177 deletions(-)
delete mode 100644 arch/arm/mach-ux500/board-mop500-sdi.c
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index de544aa..9741de95 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -5,8 +5,7 @@
obj-y := cpu.o id.o timer.o pm.o
obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o
-obj-$(CONFIG_MACH_MOP500) += board-mop500-sdi.o \
- board-mop500-regulators.o \
+obj-$(CONFIG_MACH_MOP500) += board-mop500-regulators.o \
board-mop500-audio.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
deleted file mode 100644
index fcbf3a1..0000000
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Hanumath Prasad <hanumath.prasad-0IS4wlFg1OjSUeElwK9/Pw@public.gmane.org>
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/mmci.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/dma-ste-dma40.h>
-
-#include <asm/mach-types.h>
-
-#include "db8500-regs.h"
-#include "board-mop500.h"
-#include "ste-dma40-db8500.h"
-
-/*
- * v2 has a new version of this block that need to be forced, the number found
- * in hardware is incorrect
- */
-#define U8500_SDI_V2_PERIPHID 0x10480180
-
-/*
- * SDI 0 (MicroSD slot)
- */
-
-#ifdef CONFIG_STE_DMA40
-struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = {
- .mode = STEDMA40_MODE_LOGICAL,
- .dir = DMA_DEV_TO_MEM,
- .dev_type = DB8500_DMA_DEV29_SD_MM0,
-};
-
-static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
- .mode = STEDMA40_MODE_LOGICAL,
- .dir = DMA_MEM_TO_DEV,
- .dev_type = DB8500_DMA_DEV29_SD_MM0,
-};
-#endif
-
-struct mmci_platform_data mop500_sdi0_data = {
- .f_max = 100000000,
- .capabilities = MMC_CAP_4_BIT_DATA |
- MMC_CAP_SD_HIGHSPEED |
- MMC_CAP_MMC_HIGHSPEED |
- MMC_CAP_ERASE |
- MMC_CAP_UHS_SDR12 |
- MMC_CAP_UHS_SDR25,
- .gpio_wp = -1,
- .sigdir = MCI_ST_FBCLKEN |
- MCI_ST_CMDDIREN |
- MCI_ST_DATA0DIREN |
- MCI_ST_DATA2DIREN,
-#ifdef CONFIG_STE_DMA40
- .dma_filter = stedma40_filter,
- .dma_rx_param = &mop500_sdi0_dma_cfg_rx,
- .dma_tx_param = &mop500_sdi0_dma_cfg_tx,
-#endif
-};
-
-/*
- * SDI1 (SDIO WLAN)
- */
-#ifdef CONFIG_STE_DMA40
-static struct stedma40_chan_cfg sdi1_dma_cfg_rx = {
- .mode = STEDMA40_MODE_LOGICAL,
- .dir = DMA_DEV_TO_MEM,
- .dev_type = DB8500_DMA_DEV32_SD_MM1,
-};
-
-static struct stedma40_chan_cfg sdi1_dma_cfg_tx = {
- .mode = STEDMA40_MODE_LOGICAL,
- .dir = DMA_MEM_TO_DEV,
- .dev_type = DB8500_DMA_DEV32_SD_MM1,
-};
-#endif
-
-struct mmci_platform_data mop500_sdi1_data = {
- .ocr_mask = MMC_VDD_29_30,
- .f_max = 100000000,
- .capabilities = MMC_CAP_4_BIT_DATA |
- MMC_CAP_NONREMOVABLE,
- .gpio_cd = -1,
- .gpio_wp = -1,
-#ifdef CONFIG_STE_DMA40
- .dma_filter = stedma40_filter,
- .dma_rx_param = &sdi1_dma_cfg_rx,
- .dma_tx_param = &sdi1_dma_cfg_tx,
-#endif
-};
-
-/*
- * SDI 2 (POP eMMC, not on DB8500ed)
- */
-
-#ifdef CONFIG_STE_DMA40
-struct stedma40_chan_cfg mop500_sdi2_dma_cfg_rx = {
- .mode = STEDMA40_MODE_LOGICAL,
- .dir = DMA_DEV_TO_MEM,
- .dev_type = DB8500_DMA_DEV28_SD_MM2,
-};
-
-static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = {
- .mode = STEDMA40_MODE_LOGICAL,
- .dir = DMA_MEM_TO_DEV,
- .dev_type = DB8500_DMA_DEV28_SD_MM2,
-};
-#endif
-
-struct mmci_platform_data mop500_sdi2_data = {
- .ocr_mask = MMC_VDD_165_195,
- .f_max = 100000000,
- .capabilities = MMC_CAP_4_BIT_DATA |
- MMC_CAP_8_BIT_DATA |
- MMC_CAP_NONREMOVABLE |
- MMC_CAP_MMC_HIGHSPEED |
- MMC_CAP_ERASE |
- MMC_CAP_CMD23,
- .gpio_cd = -1,
- .gpio_wp = -1,
-#ifdef CONFIG_STE_DMA40
- .dma_filter = stedma40_filter,
- .dma_rx_param = &mop500_sdi2_dma_cfg_rx,
- .dma_tx_param = &mop500_sdi2_dma_cfg_tx,
-#endif
-};
-
-/*
- * SDI 4 (on-board eMMC)
- */
-
-#ifdef CONFIG_STE_DMA40
-struct stedma40_chan_cfg mop500_sdi4_dma_cfg_rx = {
- .mode = STEDMA40_MODE_LOGICAL,
- .dir = DMA_DEV_TO_MEM,
- .dev_type = DB8500_DMA_DEV42_SD_MM4,
-};
-
-static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = {
- .mode = STEDMA40_MODE_LOGICAL,
- .dir = DMA_MEM_TO_DEV,
- .dev_type = DB8500_DMA_DEV42_SD_MM4,
-};
-#endif
-
-struct mmci_platform_data mop500_sdi4_data = {
- .f_max = 100000000,
- .capabilities = MMC_CAP_4_BIT_DATA |
- MMC_CAP_8_BIT_DATA |
- MMC_CAP_NONREMOVABLE |
- MMC_CAP_MMC_HIGHSPEED |
- MMC_CAP_ERASE |
- MMC_CAP_CMD23,
- .gpio_cd = -1,
- .gpio_wp = -1,
-#ifdef CONFIG_STE_DMA40
- .dma_filter = stedma40_filter,
- .dma_rx_param = &mop500_sdi4_dma_cfg_rx,
- .dma_tx_param = &mop500_sdi4_dma_cfg_tx,
-#endif
-};
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index 32cc0d8..7c7b0ad 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -8,12 +8,7 @@
#define __BOARD_MOP500_H
#include <linux/platform_data/asoc-ux500-msp.h>
-#include <linux/amba/mmci.h>
-extern struct mmci_platform_data mop500_sdi0_data;
-extern struct mmci_platform_data mop500_sdi1_data;
-extern struct mmci_platform_data mop500_sdi2_data;
-extern struct mmci_platform_data mop500_sdi4_data;
extern struct msp_i2s_platform_data msp0_platform_data;
extern struct msp_i2s_platform_data msp1_platform_data;
extern struct msp_i2s_platform_data msp2_platform_data;
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 8820f60..fa308f0 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -146,10 +146,6 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
/* Requires call-back bindings. */
OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
/* Requires DMA bindings. */
- OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data),
- OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data),
- OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data),
- OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data),
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
"ux500-msp-i2s.0", &msp0_platform_data),
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-04-10 12:20 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-10 12:20 [PATCH V3 00/19] mmc: mmci: Improve DT support Ulf Hansson
[not found] ` <1397132462-8005-1-git-send-email-ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-04-10 12:20 ` [PATCH V3 01/19] mmc: mmci: Convert to the mmc gpio API Ulf Hansson
2014-04-10 12:20 ` [PATCH V3 02/19] mmc: mmci: Convert to devm functions Ulf Hansson
2014-04-10 12:20 ` [PATCH V3 03/19] mmc: mmci: Update DT documentation Ulf Hansson
2014-04-10 12:20 ` [PATCH V3 04/19] mmc: mmci: Add DT bindings for signal direction Ulf Hansson
2014-04-10 12:20 ` [PATCH V3 05/19] mmc: mmci: Add DT bindings for feedback clock pin Ulf Hansson
2014-04-10 12:20 ` [PATCH V3 06/19] mmc: mmci: Use the common mmc DT parser Ulf Hansson
2014-04-10 12:20 ` [PATCH V3 07/19] ARM: ux500: Add mmci signal directions and feeback clock in DT for href Ulf Hansson
2014-04-10 12:20 ` [PATCH V3 08/19] ARM: ux500: Convert to the common mmc DT bindings for highspeed mode Ulf Hansson
2014-04-10 12:20 ` [PATCH V3 09/19] ARM: nomadik: " Ulf Hansson
2014-04-10 12:20 ` [PATCH V3 10/19] ARM: u300: " Ulf Hansson
2014-04-10 12:20 ` [PATCH V3 11/19] mmc: mmci: Mark the DT bindings for highspeed mode as deprecated Ulf Hansson
2014-04-10 12:20 ` [PATCH V3 12/19] mmc: mmci: Enable MMC_CAP_CMD23 Ulf Hansson
2014-04-10 12:20 ` [PATCH V3 13/19] ARM: ux500: Add the mmc capabilities flags to DT Ulf Hansson
2014-04-10 12:20 ` [PATCH V3 14/19] ARM: ux500: Add a vmmc regulator through DT for the poped eMMC for href Ulf Hansson
2014-04-10 12:20 ` Ulf Hansson [this message]
2014-04-10 12:20 ` [PATCH V3 16/19] mmc: mmci: Enforce DT for signal direction and feedback clock Ulf Hansson
2014-04-10 12:21 ` [PATCH V3 17/19] mmc: mmci: Enforce mmc capabilities through DT Ulf Hansson
2014-04-10 12:21 ` [PATCH V3 18/19] mmc: mmci: Enforce DMA configuration " Ulf Hansson
[not found] ` <1397132462-8005-19-git-send-email-ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-05-20 4:24 ` Ulf Hansson
2014-04-10 12:21 ` [PATCH V3 19/19] mmc: mmci: Enforce max frequency " Ulf Hansson
2014-04-10 12:26 ` [PATCH V3 00/19] mmc: mmci: Improve DT support Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1397132462-8005-16-git-send-email-ulf.hansson@linaro.org \
--to=ulf.hansson-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).