From: Ben Dooks <ben.dooks@codethink.co.uk>
To: linux-kernel@lists.codethink.co.uk, dmaengine@vger.kernel.org
Cc: vinod.koul@intel.com, dan.j.williams@intel.com,
linux-sh@vger.kernel.org, magnus.damm@opensource.se,
horms@verge.net.au, g.liakhovetski@gmx.d,
kuninori.morimoto.gx@renesas.com, devicetree@vger.kernel.org,
Ben Dooks <ben.dooks@codethink.co.uk>
Subject: [PATCH v2 6/9] ARM: shmobile: r8a7790: add audio dmac node
Date: Mon, 14 Apr 2014 22:35:09 +0100 [thread overview]
Message-ID: <1397511312-4845-7-git-send-email-ben.dooks@codethink.co.uk> (raw)
In-Reply-To: <1397511312-4845-1-git-send-email-ben.dooks@codethink.co.uk>
Add initial audio dmac node and resources.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
---
arch/arm/boot/dts/r8a7790.dtsi | 66 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 66 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index de3ca15..582e687 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -158,6 +158,72 @@
};
};
+ dma1: dma-mux@1 {
+ compatible = "renesas,shdma-mux";
+ #dma-cells = <2>;
+ dma-channels = <20>;
+ dma-requests = <256>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ audiodma0: dma-contorller@ec700000 {
+ compatible = "renesas,shdma-r8a7790";
+ clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC0>;
+ dma-channels = <13>;
+ status = "disabled";
+ reg = <0 0xec700020 0 0xffc0>;
+
+ interrupts = <0 346 IRQ_TYPE_LEVEL_HIGH>, /* error */
+ <0 320 IRQ_TYPE_LEVEL_HIGH>, /* ch0 */
+ <0 321 IRQ_TYPE_LEVEL_HIGH>,
+ <0 322 IRQ_TYPE_LEVEL_HIGH>,
+ <0 323 IRQ_TYPE_LEVEL_HIGH>,
+ <0 324 IRQ_TYPE_LEVEL_HIGH>,
+ <0 325 IRQ_TYPE_LEVEL_HIGH>,
+ <0 326 IRQ_TYPE_LEVEL_HIGH>,
+ <0 327 IRQ_TYPE_LEVEL_HIGH>,
+ <0 328 IRQ_TYPE_LEVEL_HIGH>,
+ <0 329 IRQ_TYPE_LEVEL_HIGH>,
+ <0 330 IRQ_TYPE_LEVEL_HIGH>,
+ <0 331 IRQ_TYPE_LEVEL_HIGH>,
+ <0 332 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12";
+ };
+
+ audiodma1: dma-controller@ec720000 {
+ compatible = "renesas,shdma-r8a7790";
+ clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC1>;
+ dma-channels = <13>;
+ status = "disabled";
+ reg = <0 0xec720020 0 0xffc0>;
+
+ interrupts = <0 347 IRQ_TYPE_LEVEL_HIGH>, /* error */
+ <0 333 IRQ_TYPE_LEVEL_HIGH>, /* ch0 */
+ <0 334 IRQ_TYPE_LEVEL_HIGH>,
+ <0 335 IRQ_TYPE_LEVEL_HIGH>,
+ <0 336 IRQ_TYPE_LEVEL_HIGH>,
+ <0 337 IRQ_TYPE_LEVEL_HIGH>,
+ <0 338 IRQ_TYPE_LEVEL_HIGH>,
+ <0 339 IRQ_TYPE_LEVEL_HIGH>,
+ <0 340 IRQ_TYPE_LEVEL_HIGH>,
+ <0 341 IRQ_TYPE_LEVEL_HIGH>,
+ <0 342 IRQ_TYPE_LEVEL_HIGH>,
+ <0 343 IRQ_TYPE_LEVEL_HIGH>,
+ <0 344 IRQ_TYPE_LEVEL_HIGH>,
+ <0 345 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12";
+ };
+ };
+
gic: interrupt-controller@f1001000 {
compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
--
1.9.1
next prev parent reply other threads:[~2014-04-14 21:35 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-14 21:35 Updates Renesas OF-DMA code Ben Dooks
2014-04-14 21:35 ` [PATCH v2 1/9] ARM: shmobile: r8a7790: add dmac0,dmac1 clocks Ben Dooks
2014-05-13 9:23 ` Geert Uytterhoeven
2014-06-04 15:54 ` Ben Dooks
2014-04-14 21:35 ` [PATCH v2 2/9] ARM: shmobile: r8a7790: add dma defines for sys and audio dmacs Ben Dooks
2014-04-14 22:10 ` Arnd Bergmann
2014-04-14 22:51 ` Simon Horman
2014-04-15 9:46 ` Ben Dooks
2014-05-13 8:51 ` Geert Uytterhoeven
2014-05-13 10:46 ` Geert Uytterhoeven
[not found] ` <CAMuHMdUsRSGuGgnAgjKtOWmx3C_PWUxAU=2XTvPE1M9o13S1uA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-05-27 8:08 ` Geert Uytterhoeven
2014-04-14 21:35 ` [PATCH v2 3/9] ARM: shmobile: r8a7790: add dmac0 dmac1 nodes Ben Dooks
[not found] ` <1397511312-4845-4-git-send-email-ben.dooks-4yDnlxn2s6sWdaTGBSpHTA@public.gmane.org>
2014-05-13 12:00 ` Geert Uytterhoeven
[not found] ` <CAMuHMdUNAFJEFWYe5cpKaZqoZFhRA1s0YBntT5ZVJaieSj8ovQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-06-04 16:04 ` Ben Dooks
2014-05-15 13:11 ` Geert Uytterhoeven
2014-04-14 21:35 ` [PATCH v2 4/9] ARM: shmobile: r8a7790: Add DMA for MMCIF1 Ben Dooks
2014-04-14 21:35 ` [PATCH v2 5/9] ARM: shmobile: add Audio DMAC clocks Ben Dooks
2014-04-14 21:35 ` Ben Dooks [this message]
2014-05-13 8:53 ` [PATCH v2 6/9] ARM: shmobile: r8a7790: add audio dmac node Geert Uytterhoeven
2014-05-13 12:10 ` Geert Uytterhoeven
2014-05-15 13:12 ` Geert Uytterhoeven
[not found] ` <1397511312-4845-1-git-send-email-ben.dooks-4yDnlxn2s6sWdaTGBSpHTA@public.gmane.org>
2014-04-14 21:35 ` [PATCH v2 7/9] ARM: shmobile: lager: enable sysdma units 0 and 1 Ben Dooks
2014-04-14 21:35 ` [PATCH v2 8/9] DMA: shdma: initial of common code Ben Dooks
2014-04-14 22:06 ` Arnd Bergmann
2014-04-15 9:54 ` Ben Dooks
2014-05-21 20:14 ` Geert Uytterhoeven
2014-06-04 15:54 ` Ben Dooks
2014-04-14 21:35 ` [PATCH v2 9/9] DMA: shdma: wire r8a7790 Ben Dooks
2014-04-15 12:20 ` Sergei Shtylyov
2014-04-18 1:32 ` Kuninori Morimoto
2014-04-23 13:08 ` Ben Dooks
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1397511312-4845-7-git-send-email-ben.dooks@codethink.co.uk \
--to=ben.dooks@codethink.co.uk \
--cc=dan.j.williams@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=g.liakhovetski@gmx.d \
--cc=horms@verge.net.au \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=linux-kernel@lists.codethink.co.uk \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@opensource.se \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).