From: Iyappan Subramanian <isubramanian@apm.com>
To: davem@davemloft.net, netdev@vger.kernel.org, devicetree@vger.kernel.org
Cc: gregkh@linuxfoundation.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, jcm@redhat.com,
patches@apm.com, Iyappan Subramanian <isubramanian@apm.com>,
Ravi Patel <rapatel@apm.com>, Keyur Chudgar <kchudgar@apm.com>
Subject: [PATCH v3 0/4] net: Add APM X-Gene SoC Ethernet driver support
Date: Wed, 16 Apr 2014 19:39:24 -0700 [thread overview]
Message-ID: <1397702368-4846-1-git-send-email-isubramanian@apm.com> (raw)
Adding APM X-Gene SoC Ethernet driver.
v3: Address comments from v2 review
* cleaned up set_desc and get_desc functions
* added dtb mdio node and phy-handle subnode
* renamed dtb phy-mode to phy-connection-type
* added of_phy_connect call to connec to PHY
* added empty line after last local variable declaration
* removed type casting when not required
* removed inline keyword from source files
* removed CONFIG_CPU_BIG_ENDIAN ifdef
v2
* Completely redesigned ethernet driver
* Added support to work with big endian kernel
* Renamed dtb phyid entry to phy_addr
* Changed dtb local-mac-address entry to byte string format
* Renamed dtb eth8clk entry to menetclk
v1
* Initial version
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Ravi Patel <rapatel@apm.com>
Signed-off-by: Keyur Chudgar <kchudgar@apm.com>
---
Iyappan Subramanian (4):
MAINTAINERS: Add entry for APM X-Gene SoC ethernet driver
Documentation: dts: Add bindings for APM X-Gene SoC ethernet driver
dts: Add bindings for APM X-Gene SoC ethernet driver
drivers: net: Add APM X-Gene SoC ethernet driver support.
.../devicetree/bindings/net/apm-xgene-enet.txt | 66 ++
MAINTAINERS | 8 +
arch/arm64/boot/dts/apm-mustang.dts | 4 +
arch/arm64/boot/dts/apm-storm.dtsi | 27 +-
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/apm/Kconfig | 1 +
drivers/net/ethernet/apm/Makefile | 5 +
drivers/net/ethernet/apm/xgene/Kconfig | 10 +
drivers/net/ethernet/apm/xgene/Makefile | 6 +
drivers/net/ethernet/apm/xgene/xgene_enet_hw.c | 846 +++++++++++++++++
drivers/net/ethernet/apm/xgene/xgene_enet_hw.h | 380 ++++++++
drivers/net/ethernet/apm/xgene/xgene_enet_main.c | 952 ++++++++++++++++++++
drivers/net/ethernet/apm/xgene/xgene_enet_main.h | 136 +++
14 files changed, 2440 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/apm-xgene-enet.txt
create mode 100644 drivers/net/ethernet/apm/Kconfig
create mode 100644 drivers/net/ethernet/apm/Makefile
create mode 100644 drivers/net/ethernet/apm/xgene/Kconfig
create mode 100644 drivers/net/ethernet/apm/xgene/Makefile
create mode 100644 drivers/net/ethernet/apm/xgene/xgene_enet_hw.c
create mode 100644 drivers/net/ethernet/apm/xgene/xgene_enet_hw.h
create mode 100644 drivers/net/ethernet/apm/xgene/xgene_enet_main.c
create mode 100644 drivers/net/ethernet/apm/xgene/xgene_enet_main.h
--
1.7.9.5
next reply other threads:[~2014-04-17 2:39 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-17 2:39 Iyappan Subramanian [this message]
2014-04-17 2:39 ` [PATCH v3 1/4] MAINTAINERS: Add entry for APM X-Gene SoC ethernet driver Iyappan Subramanian
[not found] ` <1397702368-4846-2-git-send-email-isubramanian-qTEPVZfXA3Y@public.gmane.org>
2014-04-17 3:18 ` Joe Perches
2014-04-21 0:56 ` Javier Martinez Canillas
[not found] ` <CABxcv=mj+phHmyg2U2jW51mLTwBN9Au791m-GtqU5BXDPy7Gtg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-04-24 0:51 ` Iyappan Subramanian
2014-04-17 2:39 ` [PATCH v3 2/4] Documentation: dts: Add bindings " Iyappan Subramanian
2014-04-17 2:39 ` [PATCH v3 3/4] " Iyappan Subramanian
2014-04-17 2:39 ` [PATCH v3 4/4] drivers: net: Add APM X-Gene SoC ethernet driver support Iyappan Subramanian
2014-04-17 3:16 ` Joe Perches
2014-04-24 0:46 ` Iyappan Subramanian
2014-04-25 13:13 ` Mark Salter
[not found] ` <1398431623.3010.76.camel-PDpCo7skNiwAicBL8TP8PQ@public.gmane.org>
2014-04-25 21:04 ` Iyappan Subramanian
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1397702368-4846-1-git-send-email-isubramanian@apm.com \
--to=isubramanian@apm.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jcm@redhat.com \
--cc=kchudgar@apm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=patches@apm.com \
--cc=rapatel@apm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).